
7
2. Basic safety hints
2.1 Read and follow all hints inside the Instruction Manual
Basic requirements for the correct use of the gauging system or the machine are the
knowledge of the basic safety hints and the safety precautions.
This instruction manual contains the most important safety hints.
This instruction manual, especially the safety hints and precautions must be followed by
every person working with this gauge or machine.
Also follow all general plant safety rules and precautions not mentioned in this manual.
2.2 Owner obligations
The owner agrees to only allow the gauge or the machine to be used by qualified and trained
persons who
-Have been instructed in the general safety rules and precautions
-Have been instructed in the correct use of the gauge and machine
-Have read and understood the safety chapters and caution hints of this instruction
manual.
2.3 Operator obligations
All persons working with this gauge and machine agree before starting to work
-To follow the general safety rules
-To read and understand the safety chapters and caution hints of this instruction manual.
2.4 Intended use
The only acceptable use for this gauge is as a length gauging system. Any other use is not
intended and is a misuse of the gauging system.
Hymark is not liable for any damages resulting from misuse.
Intended use also means:
-Following all safety hints and precautions mentioned in this manual
-Following the maintenance and inspection procedures as mentioned
in this manual.