Kemppi MasterMig 353 Manuel utilisateur

MasterMig 353, 355

Operating manual- EN

MasterMig 353, 355

Operating manual- EN

CONTENTS

1. General 4

1.1 Equipment description 6

1.2 MasterMig device 7

1.2.1 Wire feed mechanism 8

1.3 MasterMig Cooler cooling unit (optional) 10

2. Installation 11

2.1 Installing power source mains plug 12

2.2 Installing cooling unit (optional) 13

2.3 Installing equipment on cart (optional) 15

2.4 Connecting welding gun 17

2.5 Connecting earth return cable 18

2.6 Installing remote control (optional) 19

2.7 Installing and changing wire 20

2.8 Installing and replacing feed rolls 25

2.9 Installing and replacing wire guide tubes 27

2.10 Installing gas bottle and testing gas flow 28

3. Operation 30

3.1 Preparing welding system for use 31

3.1.1 Filling cooler and circulating coolant 31

3.2 Calibrating welding cable 33

3.3 Using control panel 34

3.3.1 Control panel: Main view 35

3.3.2 Control panel: Memory channels 37

3.3.3 Control panel: Welding process 37

3.3.4 Control panel: Trigger logic 38

3.3.5 Control panel: Weld Assist 39

3.3.6 Control panel: Welding parameters 40

3.3.7 Control panel: System settings 42

3.3.8 Control panel: Weld data 44

3.4 Additional guidance to functions and features 45

3.4.1 1-MIG 45

3.4.2 Pulse welding 45

3.4.3 MAX Cool process 45

3.4.4 MAX Position process 46

3.4.5 MAX Speed process 46

3.4.6 Trigger logic functions 47

3.4.7 WiseFusion feature 48

MasterMig 353, 355

Operating manual- EN

3.4.8 WeldEye with DCM (optional) 48

3.5 Using remote control 50

3.6 Changing welding polarity 51

3.7 Lifting MasterMig equipment 52

4. Maintenance 53

4.1 Daily maintenance 54

4.2 Periodic maintenance 55

4.3 Service workshops 56

4.4 Troubleshooting 57

4.5 Error codes 59

4.6 Installing and cleaning power source air filter (optional) 61

4.7 Disposal 63

5. Technical data 64

5.1 MasterMig devices 65

5.2 MasterMig cooling unit 69

5.3 Wire feeder consumables 70

5.4 MasterMig ordering info 72

MasterMig 353, 355

Operating manual- EN

1. GENERAL

These instructions describe the use of Kemppi's MasterMig welding equipment designed for light- to medium-duty pro-

fessional use in MIG/MAG welding.

MasterMig welding machines include both manual and automatic welding processes. Pulse welding is possible with the

MasterMig 355 series machines.

MasterMig series:

MasterMig product series MasterMig device model

MasterMig 353 MasterMig 353 G

MasterMig 353 GM

MasterMig 355 MasterMig 355 G

MasterMig 355 GM

MasterMig is designed to be used together with Kemppi's Flexlite GX MIG welding guns with euro connector.

MasterMig can be used also for TIG * and MMA ** welding.

* TIG welding requires the use of a dedicated Flexlite TX TIG torch with euro connector.

** MMAwelding requires a dedicated DIX-euro adapter.

Important notes

Read the instructions through carefully. For your own safety, and that of your working environment, pay particular atten-

tion to the safety instructions delivered with the equipment.

Items in the manual that require particular attention in order to minimize damage and harm are indicated with the

below symbols. Read these sections carefully and follow their instructions.

Note: Gives the user a useful piece of information.

Caution: Describes a situation that may result in damage to the equipment or system.

Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.

MasterMig 353, 355

Operating manual- EN

Kemppi symbols: Userdoc.

DISCLAIMER

While every effort has been made to ensure that the information contained in this guide is accurate and com-

plete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the spe-

cification of the product described at any time without prior notice. Do not copy, record, reproduce or transmit

the contents of this guide without prior permission from Kemppi.

MasterMig 353, 355

Operating manual- EN

1.1 Equipment description

MasterMig device models (350 A)

•MasterMig 353 G

>> Generator-compatible

>> Standard device with automatic 1-MIG process

•MasterMig 353 GM

>> Generator-compatible and multi-voltage

>> Standard device with automatic 1-MIG process

•MasterMig 355 G

>> Generator-compatible

>> Pulse device with automatic 1-MIG and pulse processes. Advanced MAX processes as optional.

•MasterMig 355 GM

>> Generator-compatible and multi-voltage

>> Pulse device with automatic 1-MIG and pulse processes. Advanced MAX processes as optional.

All MasterMig device models have a 4-roll wire feed mechanism with the maximum wire spool diameter of 300 mm.

For the MasterMig device part descriptions, refer to "MasterMig device" on the next page.

MasterMig control panels

•Color LCD display

MasterMig cooling units

•MasterMig Cooler

•MasterMig Cooler M (multi-voltage).

For the cooling unit part descriptions, refer to "MasterMig Cooler cooling unit (optional)" on page10.

MIG welding guns

•Flexlite GX welding guns with euro connector.

For more information on the Flexlite GX welding guns, refer to Kemppi Userdoc.

Subfeeders

Subfeeder support can be added with a separate installation kit (contact your Kemppi dealer / service workshop for

more information).

•SuperSnake GTX subfeeder.

For more information on the SuperSnake GTX subfeeder, refer to Kemppi Userdoc.

Optional accessories

•4-wheel carts

•2-wheel carts

•Remote control HR40 (2-knob control)

•Remote control HR43 (1-knob control)

•Power source air filter

•Wire feed cabinet heater.

For more information on optional accessories, contact your local Kemppi dealer.

MasterMig 353, 355

Operating manual- EN

1.2 MasterMig device

Front

1. Transportation handle (also for mechanical lifting when the device is not installed on a cooling unit or cart)

2. Control panel

3. Work lights ON/OFF

4. Work light

5. Control cable connector

6. Earth return cable connector

7. Welding cable euro connector

8. Front locking interface

>> For locking on top of the cooling unit or on the cart

9. Connector for subfeeder synchronization kit (optional)

10. Wire feed cabinet hatch.

Rear

1. Shielding gas hose connector

2. Mains cable

MasterMig 353, 355

Operating manual- EN

3. Power switch

4. Rear locking interface

>> For locking on top of the cooling unit or on the cart.

Inside wire feed cabinet

1. Gas regulating valve (MasterMig 355)

>> For setting the gas flow rate in the device lower than the gas flow rate from the gas supply

2. USB connector

3. Polarity terminals

4. Wire inch button

>> Drive the filler wire forward (with arc off)

5. Gas test button

>> Test the shielding gas flow and flush the gas line

6. Wire feed mechanism (refer to "Wire feed mechanism" below)

7. Wire spool.

1.2.1 Wire feed mechanism

1. Drive rolls and drive roll mounting caps

2. Middle guide tube locking clip

3. Middle guide tube

4. Inlet guide tube

5. Pressure handles

6. Pressure rolls and pressure roll mounting pins

7. Pressure roll locking arms

8. Outlet guide tube.

MasterMig 353, 355

Operating manual- EN

For replacing the feed rolls, refer to "Installing and replacing feed rolls" on page25.

For replacing the wire guide tubes, refer to "Installing and replacing wire guide tubes" on page27.

MasterMig 353, 355

Operating manual- EN

1.3 MasterMig Cooler cooling unit (optional)

Front

1. Cooler container cap

2. Cooling liquid level indicator

3. Cooling liquid circulation button

>> Keeping the button pressed activates the pump and circulates the cooling liquid throughout the system. Once

released, the pump stops.

4. Front locking interface

>> For locking on the cart

5. Front locking interface

>> For locking to the power source

6. Coolant inlet connector (red)

7. Coolant outlet connector (blue).

Rear

1. Rear locking interface

>> For locking to the power source

2. Rear locking interface

>> For locking on the cart.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kemppi Système de soudage

Kemppi

Kemppi MTP 350 Manuel utilisateur

Kemppi

Kemppi FASTMIG MS 200 Manuel utilisateur

Kemppi

Kemppi Kempomat 2001 Manuel technique

Kemppi

Kemppi KEMPACT 251R Manuel utilisateur

Kemppi

Kemppi Kempact MIG 2530 Manuel utilisateur

Kemppi

Kemppi FastMig MR 200 Manuel utilisateur

Kemppi

Kemppi FastCool 10 Manuel technique

Kemppi

Kemppi Kempact MIG 2530 Manuel utilisateur

Kemppi

Kemppi KEMPOMAT 181 S Manuel utilisateur

Kemppi

Kemppi WeldForce KWF 200 Manuel utilisateur

Kemppi

Kemppi MASTERTIG AC/DC 2000 Manuel utilisateur

Kemppi

Kemppi MinarcTig Evo 200 Manuel utilisateur

Kemppi

Kemppi MasterTig 535ACDC Manuel utilisateur

Kemppi

Kemppi Feed 400 Manuel utilisateur

Kemppi

Kemppi A7 TIG Orbital System 300 Manuel utilisateur

Kemppi

Kemppi FastMig SF 51 Manuel utilisateur

Kemppi

Kemppi KEMPACT Manuel utilisateur

Kemppi

Kemppi FastMig M 320, FastMig M 420, FastMigM 520 Manuel utilisateur

Kemppi

Kemppi X5 FastMig Series Manuel utilisateur

Kemppi

Kemppi KMS 300 Manuel utilisateur

Kemppi

Kemppi Minarc Evo 150 Manuel utilisateur

Kemppi

Kemppi MASTERTIG AC/DC 3500W Manuel utilisateur

Kemppi

Kemppi MasterTig 3500 Manuel utilisateur

Kemppi

Kemppi MMT 42C Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

Miller

Miller Big Blue 400D Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Hypertherm

Hypertherm powermax1000 Manuel utilisateur