Keithley DAS-4300 Series Manuel utilisateur
DAS-4300 Series
USER’S GUIDE
DAS-4300 Series User’s Guide
Revision A - June 1995
Part Number: 94520
New Contact Information
Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, OH 44139
Technical Support: 1-888-KEITHLEY
Monday – Friday 8:00 a.m. to 5:00 p.m (EST)
Fax: (440) 248-6168
Visit our website at http://www.keithley.com
Keithley MetraByte Division
Keithley Instruments, Inc.
440 Myles Standish Blvd. Taunton, MA 02780
Telephone: (508) 880-3000
●
FAX: (508) 880-0179
The information contained in this manual is believed to be accurate and reliable. However, Keithley
Instruments, Inc., assumes no responsibility for its use or for any infringements of patents or other rights
of third parties that may result from its use. No license is granted by implication or otherwise under any
patent rights of Keithley Instruments, Inc.
KEITHLEY INSTRUMENTS, INC., SHALL NOT BE LIABLE FORANY SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES RELATED TO THE USE OF THIS PRODUCT. THIS
PRODUCT IS NOT DESIGNED WITH COMPONENTS OF A LEVEL OF RELIABILITY
SUITABLE FOR USE IN LIFE SUPPORT OR CRITICAL APPLICATIONS.
Refer to your Keithley Instruments license agreement for specific warranty and liability information.
MetraByte, Visual Test Extensions, and VTX are trademarks of Keithley Instruments, Inc.All other
brand and product names are trademarks or registered trademarks of their respective companies.
© Copyright Keithley Instruments, Inc., 1995.
All rights reserved. Reproduction or adaptation of any part of this documentation beyond that permitted
by Section 117 of the 1976 United States Copyright Act without permission of the Copyright owner is
unlawful.
vii
Preface
The
DAS-4300 Series User’s Guide
provides the information needed to
install and use the DAS-4301/8K high-speed analog input board.
The manual is intended for data acquisition system designers, engineers,
technicians, scientists, and other users responsible for setting up and
installing DAS-4301/8K boards. It is assumed that users are familiar with
data acquisition principles, with their computer, and with their particular
application.
The
DAS-4300 Series User’s Guide
is organized as follows:
●
Chapter 1 provides an overview of the features of the DAS-4301/8K
board, including a description of supported software and accessories.
●
Chapter 2 provides a technical description of the features of the
DAS-4301/8K board.
●
Chapter 3 describes how to unpack, set up, and install a
DAS-4301/8K board.
●
Chapter 4 describes how to use the scope and test program to test the
functions of the DAS-4301/8K board.
●
Chapter 5 provides troubleshooting information.
●
Appendix A lists the specifications for DAS-4301/8K boards.
●
Appendix B describes the Keithley Memory Manager.
●
Appendix C presents bandwidth charts for the supported input ranges.
An index completes this manual.
viii
Note:
Not all features of the DAS-4301/8K board are currently supported
by all software packages. Refer to the documentation provided with your
software package to determine which features are supported.
Table of Contents
iii
Preface
1
Overview
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
Supporting Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3
2
Functional Description
Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Input Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Onboard Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Host Computer Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
I/O Address Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Memory Address Space . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Bus Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
Pacer Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
Internal Pacer Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
External Pacer Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8
Triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9
Trigger Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9
Internal Trigger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9
External Analog Trigger. . . . . . . . . . . . . . . . . . . . . . . . . .2-10
External Digital Trigger . . . . . . . . . . . . . . . . . . . . . . . . . .2-11
Trigger Acquisition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12
Post-Trigger Acquisition . . . . . . . . . . . . . . . . . . . . . . . . .2-12
About-Trigger Acquisition . . . . . . . . . . . . . . . . . . . . . . . .2-13
Equivalent Time Sampling (ETS) . . . . . . . . . . . . . . . . . . . . . . .2-14
Random Interleave Sampling (RIS). . . . . . . . . . . . . . . . . . . . . .2-18
3
Setup and Installation
Unpacking the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2
Installing the DAS-4300 Series Standard Software Package .3-2
iv
Installing the ASO-4300 Software Package . . . . . . . . . . . . . .3-3
DOS Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3
Windows Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Configuring the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5
Creating a Configuration File . . . . . . . . . . . . . . . . . . . . . . . . .3-8
Setting Jumpers on the Board . . . . . . . . . . . . . . . . . . . . . . . .3-10
Setting the Base I/O Address . . . . . . . . . . . . . . . . . . . . . .3-12
Setting the Memory Address . . . . . . . . . . . . . . . . . . . . . .3-14
Setting the Interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-15
Acquiring Data from Channel B or
Calibrating the Board . . . . . . . . . . . . . . . . . . . . . . . . . . .3-16
Selecting AC or DC Coupling . . . . . . . . . . . . . . . . . . . . .3-17
Setting the Input Impedance of Ch A Signal . . . . . . . . . .3-17
Setting the Input Impedance of the
Analog Trigger Input Signal. . . . . . . . . . . . . . . . . . . . . .3-18
Setting the 50
Ω
Termination Resistor for the
Clock Input Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-18
Setting the 50
Ω
Termination Resistor for the
Trigger Input Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-19
Setting the 100
Ω
Pull-Up to +5 V for the
Trigger Input Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20
Setting Grounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20
Installing the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21
Initializing the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-22
4
Scope andTest Program
Control Keys for D4300.EXE . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
Scope and Test Program Menus. . . . . . . . . . . . . . . . . . . . . . . . . .4-4
A/D Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
Display Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7
Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8
EEPROM Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9
DAS-4301/8K Board Calibration. . . . . . . . . . . . . . . . . . . . . . . .4-10
Parameter Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10
Waveform Data File Format. . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11
5
Troubleshooting
Identifying Symptoms and Possible Causes . . . . . . . . . . . . . . . .5-1
Testing Board and Host Computer. . . . . . . . . . . . . . . . . . . . . . . .5-3
Testing Accessory Slot and I/O Connections. . . . . . . . . . . . . . . .5-3
Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4
v
A
Specifications
B
Keithley Memory Manager
Installing and Setting Up the KMM. . . . . . . . . . . . . . . . . . . . . . B-2
Using KMMSETUP.EXE . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Using a Text Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Removing the KMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
C
Bandwidth Charts for InputVoltage Ranges
Index
List of Figures
Figure 2-1. Block Diagram of the DAS-4301/8K . . . . . . . . . .2-2
Figure 2-2. Host Computer Memory Address Space . . . . . . . .2-6
Figure 2-3. Equivalent Time Sampling (ETS) . . . . . . . . . . . .2-15
Figure 2-4. ETS Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17
Figure 2-5. Random Interleave Sampling. . . . . . . . . . . . . . . .2-19
Figure 3-1. Jumper Placement on DAS-4301/8K Board . . . .3-11
Figure 3-2. Analog Input Circuitry. . . . . . . . . . . . . . . . . . . . .3-17
Figure 3-3. Clock I/O and Trigger I/O Circuitry . . . . . . . . . .3-19
Figure C-1. ±0.2 V Input Range (Gain Code 0) . . . . . . . . . . . C-1
Figure C-2. ±0.25 V Input Range (Gain Code 1) . . . . . . . . . . C-2
Figure C-3. ±0.5 V Input Range (Gain Code 2) . . . . . . . . . . . C-2
Figure C-4. ±1 V Input Range (Gain Code 3). . . . . . . . . . . . . C-3
Figure C-5. ±0.125 V Input Range (Gain Code 4) . . . . . . . . . C-3
Figure C-6. ±0.15625 V Input Range (Gain Code 5) . . . . . . . C-4
Figure C-7. ±0.3125 V Input Range (Gain Code 6) . . . . . . . . C-4
Figure C-8. ±0.625 V Input Range (Gain Code 7) . . . . . . . . . C-5
Figure C-9. ±0.1 V Input Range (Gain Code 8) . . . . . . . . . . . C-5
Figure C-10. ±0.125 V Input Range (Gain Code 9) . . . . . . . . . C-6
Figure C-11. ±0.25 V Input Range (Gain Code 10) . . . . . . . . . C-6
Figure C-12. ±0.5 V Input Range (Gain Code 11) . . . . . . . . . . C-7
Figure C-13. ±0.025 V Input Range (Gain Code 12) . . . . . . . . C-7
Figure C-14. ±0.03125 V Input Range (Gain Code 13) . . . . . . C-8
Figure C-15. ±0.0625 V Input Range (Gain Code 14) . . . . . . . C-8
Figure C-16. ±0.125 V Input Range (Gain Code 15) . . . . . . . . C-9
vi
List ofTables
Table 2-1. Analog Input Ranges . . . . . . . . . . . . . . . . . . . . . . .2-4
Table 2-2. Available Conversion Rates Using Internal Clock 2-8
Table 3-1. Configuring DAS-4301/8K Boards . . . . . . . . . . . .3-6
Table 3-2. Base I/O Address . . . . . . . . . . . . . . . . . . . . . . . . .3-12
Table 3-3. Memory Address . . . . . . . . . . . . . . . . . . . . . . . . .3-14
Table 3-4. Interrupt Selection . . . . . . . . . . . . . . . . . . . . . . . .3-16
Table 3-5. Grounds on the DAS-4301/8K Board . . . . . . . . .3-20
Table 4-1. Control Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Table 4-2. Suffixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
Table 4-3. A/D Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
Table 4-4. Display Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7
Table 4-5. Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8
Table 4-6. Configure EEPROM Menu . . . . . . . . . . . . . . . . . .4-9
Table 4-7. Waveform Data File Format . . . . . . . . . . . . . . . .4-11
Table 5-1. Troubleshooting Information. . . . . . . . . . . . . . . . .5-1
Table A-1. DAS-4301/8K Specifications . . . . . . . . . . . . . . . A-1
Ce manuel convient aux modèles suivants
1
Table des matières
