KBR multicomp D6 7 Series Manuel utilisateur
24905_EDEBDA0272-5019-1_EN
User Manual
Technical Parameters
multicomp D6-xxx-7
System IEnglish
V7.00
24905_EDEBDA0272-5019-1_EN
2
1 Introduction ............................................................................................................... 6
1.1 User manual ...............................................................................................................6
1.3 Safety notes................................................................................................................8
1.4 Product liability......................................................................................................... 9
1.5 Disposal .......................................................................................................................9
1.6 Overvoltage and lightning protection .............................................................9
2 Connecting the multicomp D6-xxx-7 .............................................................10
2.1 Installation and assembly....................................................................................10
2.2 Connection diagram .............................................................................................12
2.3 Terminal assignment.............................................................................................14
2.4 Device memory.......................................................................................................16
3 Commissioning guideline for the multicomp D6-xxx-7...........................17
3.1 Controller not congured ...................................................................................18
3.2 Default settings after reset .................................................................................20
Table of contents
KBR Kompensationsanlagenbau GmbH does not accept any liability for any loss
or damage resulting from printing errors in or changes to this manual.
In addition, KBR Kompensationsanlagenbau GmbH does not accept any liability for
any loss or damage caused by defective devices or devices manipulated by the user.
Copyright 2019 by KBR Kompensationsanlagenbau GmbH
Subject to change.
Table of contents
V7.00
24905_EDEBDA0272-5019-1_EN
3
4 Functions of the controller in the secureC safety and
maintenance concept...........................................................................................22
4.1 Stage resonance frequency monitoring ........................................................22
4.2 Current consumption and performance monitoring of stages.............23
4.3
urrent consumption and performance monitoring
of complete cabinets............................................................................................... 23
4.4 Temperature monitoring of stages..................................................................25
5 Control and display panel ...................................................................................27
5.1 Description of buttons and displays ...............................................................27
5.2 Navigation and device displays ........................................................................28
5.3 Setting range of the congurable parameters:...........................................37
5.4 Device programming............................................................................................38
5.5 Start menu Commissioning................................................................................38
5.6 Main menu cos φ....................................................................................................39
5.7 Main menu Voltage / Current ............................................................................42
5.8 Main menu Temperature.....................................................................................43
5.9 Main menu Module management...................................................................44
5.10 Main menu Stages .................................................................................................45
5.10.1 Sub menus Mode ...................................................................................................46
5.11 Main menu U h voltage distortion factor .....................................................47
5.12 Main menu I h distortion current ....................................................................48
5.13 Main menu Extras...................................................................................................50
5.13.1 Commissioning.......................................................................................................52
5.13.2 Submenu Transformer settings.........................................................................53
5.13.3 The voltage transformer submenu contains the following items: .......53
5.13.4 Target cosine and freeze mode submenu.....................................................54
5.13.6 Q-Control:..................................................................................................................56
5.13.7 Dynamic Adaption of the target cosine-phi (target Q/Prated).................58
5.13.8 Settings......................................................................................................................82
5.13.8.1 Submenu Modules/display.................................................................................82
5.13.8.2 Submenu System ...................................................................................................90
5.13.8.3 Service submenu................................................................................................. 102
5.13.9 Messages................................................................................................................ 105
5.13.9.1 Submenu Messages ........................................................................................... 105
6 Basic device conguration............................................................................... 109
6.1 Setting transformer ratio.................................................................................. 109
6.2 Set target cosφ .................................................................................................... 112
Table of contents
V7.00
24905_EDEBDA0272-5019-1_EN
4
6.3 Notes on troubleshooting................................................................................ 113
6.3.1 System and safety devices maintenance.................................................... 114
6.3.2 Temperature limits.............................................................................................. 114
7 Technical Data ...................................................................................................... 115
7.1 Measuring accuracy ........................................................................................... 115
7.2 Device memory.................................................................................................... 115
7.4 Power supply ........................................................................................................ 116
7.5 Hardware inputs .................................................................................................. 116
7.6 Hardware outputs............................................................................................... 117
7.7 Electrical connection.......................................................................................... 118
7.9 Ambient conditions / electrical safety......................................................... 119
8 Appendix................................................................................................................ 120
8.1 General technical data for modules (except multimess D4)................120
8.2 Relay output module multisio D2 4RO........................................................ 121
8.2.1 Connection diagram for relay output module ......................................... 121
8.2.3 Relay output module LED display................................................................. 121
8.2.4 Function of Scan button ................................................................................... 122
8.2.5 DIP switch functions........................................................................................... 122
8.3 Function description of the relay output module
multisio D4-4RO ISO........................................................................................... 123
8.3.1 Connection diagram for relay output module ......................................... 123
8.3.2 Relay output module LED display................................................................. 124
8.3.3 Function of Scan button ................................................................................... 124
8.3.4 DIP switch functions........................................................................................... 125
8.3.4.1 Operating mode .................................................................................................. 125
8.3.4.2 DIP switch settings..............................................................................................125
8.3.4.3 Technical data....................................................................................................... 126
8.4 Temperature module multisio D2 1TI2RO.................................................. 128
8.4.1 Temperature module connection chart...................................................... 128
8.4.2 Temperature module LED display................................................................. 129
8.4.3 Function of Scan button ................................................................................... 129
8.4.4 DIP switch functions........................................................................................... 130
8.5 Current measurement module multisio D2-4CI....................................... 131
8.5.1 Current measuring module connection chart.......................................... 131
8.5.2 Current measurement module LED display .............................................. 132
8.5.3 Function of Scan button ................................................................................... 132
8.6 Technical data of the multimess D4 measuring module ...................... 133
Table of contents
V7.00
24905_EDEBDA0272-5019-1_EN
5
8.6.1 Measuring accuracy ........................................................................................... 133
8.6.2 Measuring principle ........................................................................................... 133
8.5.3 Device memory.................................................................................................... 134
8.5.4 Power supply ........................................................................................................ 134
8.5.5 Hardware inputs and outputs......................................................................... 134
8.5.5.1 Inputs ...................................................................................................................... 134
8.5.5.1 Outputs .................................................................................................................. 134
8.5.6 Electrical connection.......................................................................................... 135
8.5.7 Mechanical data................................................................................................... 135
8.5.8 Standards and miscellaneous......................................................................... 136
8.5.9 Commissioning the multimess D4 at the multicomp D6-xxx-7......... 136
8.9.10 Connections .......................................................................................................... 137
9 multisio D2-4AI analog input module......................................................... 139
9.1 Analog input module connection diagram............................................... 139
9.2 Analog input module LED display ................................................................ 140
9.3 Function of Scan button ................................................................................... 141
9.4 Function of DIP switch....................................................................................... 141
9.5 Technical data:...................................................................................................... 142
10 multisio D2-4DI digital input module.......................................................... 144
10.2 Digital input module LED display.................................................................. 145
10.3 Function of Scan button ................................................................................... 145
10.3 Function of the DIP switches........................................................................... 146
10.3.1 Operating mode .................................................................................................. 146
10.4 DIP switch settings..............................................................................................147
10.5 Technical data:...................................................................................................... 148
Table of contents
V7.00
24905_EDEBDA0272-5019-1_EN
6
1 Introduction
Thank you for choosing this KBR quality product.
To become familiar with the operation and programming of the device and to use the
full range of functions of this high-quality product at all times, you should read this user
manual carefully.
The individual chapters explain the technical details of the device and show how damage
can be avoided through proper installation and commissioning.
1.1 User manual
This user manual describes the device version multicomp D6-xxx-7. This user manual
must be accessible to the user at all times (e.g. in the switchgear cabinet). Even if the
device is resold to third parties, the manual remains an inherent part of the device.
Although the utmost care has been taken in writing this user manual, errors may still oc-
cur. We would be very grateful if you would notify us of any errors or unclear descriptions
you may notice.
Introduction
V7.00
24905_EDEBDA0272-5019-1_EN
7
1.2 Safety keys
This manual contains instructions that you must follow for your personal safety and to
avoid material damage. These instructions are identied by a warning sign or information
symbol, depending on the degree of hazard they warn about.
DANGEROUS VOLTAGE
"Warning" means that death, major injuries or damage may occur if suitable safety pre-
cautions are not taken.
CAUTION
"Caution" means that minor injuries or damage may occur if the appropriate safety pre-
cautions are not taken.
NOTE
"Note" is an important piece of information on the product, its operation or the respec-
tive part of the operating instructions to which special reference is being made.
Disclaimer
The contents of these operating instructions have been carefully reviewed in terms of
the hardware and software described. Nonetheless, deviations cannot be ruled out, and
the manufacturer cannot guarantee 100% conformity. The specications made in these
operating instructions are reviewed on a regular basis; any corrections required will be
included in the next revision.
Introduction
V7.00
24905_EDEBDA0272-5019-1_EN
8
1.3 Safety notes
In order to prevent operating errors, device operation is kept as simple as possible. This
will enable you to start your device up quickly.
It is in your own interest to read the following safety instructions carefully. The applicable
DIN/VDE regulations must be observed during installation!
Power supply connection, setup and operation of the device must be performed by
qualied personnel only. Qualied personnel as dened in the safety notes in this user
manual are those authorized to set up, ground and mark devices, systems and circuits in
accordance with applicable standards and regulations.
To prevent re and electric shock, do not expose the device to rain or moisture!
Before connecting the device to the power supply, check whether the local power supply
conditions comply with the specications on the device nameplate.
CAUTION
Incorrectly connecting the device can damage it.
For device connection, the data given in the connection diagram must be complied with
(see chapter “Connection diagram”) and the connection lines must be voltage-free. When
wiring, always ensure that all wiring material used is neither damaged nor defective and
that the polarity is correct!
Proper and safe operation of the product requires correct transport, storage, installation
and assembly as well as careful operation and maintenance.
If the device has any visible damage it is considered unt for use and must be disconnect-
ed from the power supply!
Troubleshooting, repairs and maintenance work may only be carried out at our plant or
after contacting our customer service team. If the device is opened without authoriza-
tion, any warranty or guarantee claim is forfeited. Correct functioning can no longer be
guaranteed!
Opening the device may expose live parts. Capacitors in the device may still be charged,
even if the device has been disconnected from all power sources. Do not operate open
devices under any circumstances!
Systems that are at risk from lightning strikes must feature lightning protection for all
input and output lines.
Introduction
V7.00
24905_EDEBDA0272-5019-1_EN
9
1.4 Product liability
You have purchased a high-quality product. Only top-quality components with excep-
tional reliability are used.
Each device undergoes a long-term test before delivery.
With regard to product liability, please see our general terms and conditions for electron-
ic devices, which you can read at www.kbr.de.
The warranty on device characteristics only applies if the device is operated in accor-
dance with its intended use!
1.5 Disposal
Please dispose of defective, out-of-date or no longer used devices properly.
If required, we will dispose of the device for you.
1.6 Overvoltage and lightning protection
To protect your purchased high-quality devices from damage, we strongly recommend
that you take overvoltage protection measures. Protect control voltage inputs, pulse and
bus lines.
Introduction
V7.00
24905_EDEBDA0272-5019-1_EN
10
2 Connecting the multicomp D6-xxx-7
2.1 Installation and assembly
The applicable DIN/VDE regulations must be observed for installation.
Before the device is connected to the power supply, check whether the local power
supply conditions comply with the specications on the nameplate. Incorrect connec-
tion may result in the destruction of the device. A dierent mains frequency can also
aect the measurement.
The device must be connected in accordance with the connection chart.
Systems that are at risk from lightning strikes must feature lightning protection mea-
sures for the power supply input.
CAUTION
The control voltage as well as the applied measuring voltage of the device must be pro-
tected using a back-up fuse.
When connecting the current transformer, the energy ow direction and the correct
assignment to the voltage path must be observed.
During installation, please also observe our safety instructions to protect against over-
voltage and lightning in the "Protective measures" chapter of this manual.
NOTE
The following points must be observed when connecting the device:
- Direction of energy ow
- Assignment of measuring voltage input/current transformer input
Installation
Table des matières
Autres manuels KBR Contrôleurs
KBR
KBR F144-MS-1V1C6-6RO-6DO-3 Manuel utilisateur
KBR
KBR F144-MS-1V1C1TI6DO-3 Manuel d'utilisation et d'entretien
KBR
KBR F144-3PH Manuel utilisateur
KBR
KBR multimax 3D6 Manuel utilisateur
KBR
KBR multicomp F144-MS-1V1C1TI6RO-3 Manuel utilisateur
KBR
KBR multimax D6-5 Series Manuel utilisateur
KBR
KBR multicomp F144-NC-1V1C6DO6RO-2 Manuel d'utilisation et d'entretien
KBR
KBR multicomp D6 Series Manuel d'instructions
KBR
KBR F144-3PH Manuel utilisateur
KBR
KBR Multicomp 2F144-NC-1V1C06RO Mode d'emploi
