Kanguru 1.1 Manuel utilisateur

Kanguru 1, 2, 3, 5, 7 & 11 Target Duplicators

User Guide

3.4 Copy

The Copy function will guide you through making CD/DVD/BD copies.

3.4.1 Making disc to disc copies

The Copy process will copy your master disc onto a single or multiple blank discs simultaneously. Due

to its simultaneous nature, a master disc in good condition and lower recording speeds are recommended

for better quality duplications.

Counter :

No Counter

Kanguru Solutions

1. Copy

From the Main Menu, press the UP or DOWN button1.

to navigate to Copy. Press the ENT button to enter the

Copy menu.

You will see the2. Counter screen. For more information

on the Counter, see section 3.2.2 Setting a Job Counter,

p.11.

Once you have set the Counter, any trays that do not contain discs in them will automatically be ejected.

You will see the following Preparation screens:

Preparing...

Waiting for Master

Preparing...

Waiting for Blanks

Insert your Master disc into the Reader drive and blank discs into the Writer drives.3.

Note: For a disc-to-disc copy, the master disc can be inserted in any of the disc drives. The Reader

is normally the 1st drive at the top of the tower. You can switch which drive is used as the Reader by

changing the Select Source setting. For more information, see section 3.10 Select Source, p.30.

After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detect

them. If either of the preparation screens are displayed for more than 2 minutes after you have inserted

your discs, please check the quality of the discs.

Once all the discs have been recognized, you will see the Confirmation screen.

Preparing :

7 Discs Detected : Go?

Note: The “7” indicates that there are seven discs recognized

by the Writers. The actual quantity may be different depending

on the number of discs you have inserted.

Copy

When the number of discs detected matches the number of blank discs you inserted, press the ENT4.

button. You will see the Processing screen.

Preparing...

Please Wait

After 2 or 3 seconds of processing time, the Copy Progress screen will appear.

Note: It is normal to see the progress indicator stay at 0-10%

and 100% for approximately 30 seconds to one minute for

duplication. That is caused by the initializing and finalizing

stages.

Copying... 4012MB

0 10% 401MB

Once the Copy process has been completed, you will see the following screen.5.

Pass 7 Fail 0 ( 7)

Waiting for Blanks

PASS 7 - number of discs successfully copied.

FAIL 0 - number of discs that failed to copy.

( 7 ) - number of copies made for this job so far.

The successful copies will be ejected. Remove the successful copies, refill the trays with blank media and

press the ENT button to continue making another round of copies. Any discs that fail to copy (bad copy)

will not be ejected automatically. You will need to manually eject them and throw them away if they are

single recording discs. Empty drives will also not be ejected automatically.

Terminate the current job.6.

If you have finished making copies, press the ESC button to terminate the current duplicationa.

project and exit to the Main Menu.

If you specified a Counter, once you see the following screen indicating that the specified Counterb.

value has been reached, you can then press the ENT button to exit to the Main Menu.

Pass 21 Fail 0

Job Completed! Press ENT to Finish

Copy

Autres manuels pour 1.1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kanguru duplicateur de disques

Kanguru

Kanguru U2-DVDDUPE-S Manuel utilisateur

Kanguru

Kanguru Autoloader 100 Manuel utilisateur

Kanguru

Kanguru KCLONE-1HD-MBC Manuel utilisateur

Kanguru

Kanguru kclone-5hd-twr Manuel utilisateur

Kanguru

Kanguru KCLONE-4NVME Manuel utilisateur

Kanguru

Kanguru DVD Duplicator Manuel utilisateur

Kanguru

Kanguru KCLONE-5HD-SATA Manuel utilisateur

Kanguru

Kanguru DVD Autoloader 200 Manuel utilisateur

Kanguru

Kanguru DC-DVDDUPE-S15 Manuel utilisateur

Kanguru

Kanguru U2D2-7 Manuel utilisateur

Kanguru

Kanguru CD Duplicator Manuel utilisateur

Manuels duplicateur de disques populaires d'autres marques

Riso

Riso CV Series Manuel

MicroBoards Technology

MicroBoards Technology GX-2 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUS325DX Manuel utilisateur

Carry

Carry Pro118 Manuel utilisateur

CopyPro

CopyPro PowerPro II Manuel utilisateur

Primera

Primera Max Manuel utilisateur

Logicube

Logicube EchoPlus-NG Manuel utilisateur

Silca

Silca Delta 2000 SA Manuel utilisateur

Reflex7

Reflex7 Daisy Chain Series Manuel utilisateur

Vinpower Digital

Vinpower Digital SharkCopier DC Manuel utilisateur

Codonics

Codonics Virtua E Manuel utilisateur

Octave

Octave Copy Master II Manuel utilisateur

StarTech.com

StarTech.com 8STSATDUP11 Manuel utilisateur

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manuel utilisateur

Addonics Technologies

Addonics Technologies UDFH7 Manuel utilisateur

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manuel utilisateur

Addonics Technologies

Addonics Technologies CFASTD5 Manuel utilisateur

MicroBoards Technology

MicroBoards Technology Quic Disc QD-2 Manuel utilisateur