KanexPro SDVoE EXT-PROMATRIXUSB Manuel utilisateur
VER 1.0
All Right Reserved
MPN: EXT-PROMATRIXUSB
Flexible Matrix System transceiver powered
by SDVoE w/ USB, POE & RS-232
2
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment
and before connecting the power supply. Please keep the following in mind as you unpack
and install this equipment:
• Always follow basic safety precautions to reduce the risk of fire,
• electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture
• or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty
slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed
upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufficient space for air to circulate
around the unit.
• Please completely disconnect the power when the unit is not in use to avoid wasting
electricity.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are trademarks of the
companies with which they are associated.
3
CONTENTS
1. Introduction.........................................................................................................................................................4
2. Applications.........................................................................................................................................................5
3. Package Contents.............................................................................................................................................5
4. System Requirements.....................................................................................................................................5
5. Features.................................................................................................................................................................5
6. Operation Controls and Functions............................................................................................................6
6.1 Front Panel..............................................................................................................................................6
6.2 Rear Panel................................................................................................................................................7
6.3 IR Cable Pinouts....................................................................................................................................8
6.4 RS-232 Bypass Pinout........................................................................................................................9
6.5 OSD Menu................................................................................................................................................9
6.6 Basic AV Extension.............................................................................................................................14
6.6.1 Point-to-Point Configuration............................................................................................14
6.7 Advanced AV Extension..................................................................................................................15
6.7.1 IP Master Controller...............................................................................................................15
6.7.2 Configuration Examples......................................................................................................16
7. Connection Diagram.......................................................................................................................................18
8. Specifications.....................................................................................................................................................19
8.1 Technical Specifications...................................................................................................................19
8.2 Video Specifications.........................................................................................................................20
8.3 Audio Specifications.........................................................................................................................21
8.3.1 Digital Audio............................................................................................................................21
8.3.2 Analog Audio..........................................................................................................................21
8.4 Cable Specifications.........................................................................................................................22
9. Acronyms...........................................................................................................................................................23
4
1. INTRODUCTION
The KanexPro SDVoE powered Modular Matrix system is the most versatile flexible video
distribution solution. The system is composed of transceiver devices that can be configured
as either video transmitters or receivers with a simple click of a mouse. The whole system
is controlled and configured by a single control module which makes setup a snap. Add the
system to a 10G network and enjoy UHD 4K Lossless video with zero latency.
The KanexPro Flexible matrix transceiver (EXT-PROMATRIXUSB) is an SDVoE IP powered
encoder/decoder solution. Each transceiver features with one HDMI input and output, three USB
2.0, phoenix connectors for audio in and out and a LAN (Ethernet) port with RS-232 control
port. The encoders use the advanced SDVoE technology to transmit full UHD 4K/60 video from
HDMI based devices with lossless video and audio with absolutely zero latency. It supports POE
(power over Ethernet) when connected with a POE network switch with distances over a single
CAT6a up to 330 ft. (100m) delivering one to one, one to many and many to many over the 10G
Ethernet switch.
Additionally, this unit supports matrix, video wall, picture in picture (PiP) and multiviewer modes
when controller (EXT-PROCTRL) is connected to the network. The controller configures settings
of all connected Transmitter/Receiver units, including IP address, netmask and extender status
are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over
a normal network connection or by directly connecting an HDMI display and USB keyboard &
mouse to the control unit. A trigger input interface is also provided to allow the easy addition
of a remote-control keypad, or other trigger-supporting devices, which can be installed within
a podium or within a table in a conference room or classroom. This interface manages stored
presets with the simple press of a button. Standard control is available via WebGUI (remote or
local), RS-232, Telnet, IR Remote and triggers.
The use of high quality 10 Gigabit Ethernet ports and Cat.6A or better cable allows for point-to-
point transmission of the video signal up to 100m. Multiple control and data signals may also be
transmitted along with the audio and video, including IR, RS-232, USB 2.0, and Ethernet.
The integrated USB hub of each transceiver can be configured to be in USB Host or Device
Mode and can function as a simple point to point KVM extension, freely routed between any
two endpoints, or it can be configured into a special “Simultaneous” mode, allowing up to 7
Host Mode transceivers to extend their USB ports to a single Device Mode transceiver. This type
of USB KVM routing flexibility enables a wide range of multi-user, control room, or on-demand
installation scenarios.
The unit may be powered directly by PoE when connected via Cat.6A to a 10 Gigabit Ethernet
switch that provides PoE (802.3at) allowing for great flexibility in installation location. The
built-in EDID and HDCP management functionality enables the unit to fit into every situation.
Basic configuration of the unit can be achieved via front panel buttons with an OSD (On-Screen
Display). Advanced control requires the optional EXT-PROCTRL system controller.
5
2. APPLICATIONS
• Video, Audio, LAN, IR, and USB extension
• Hotel or convention center display
• Multi-monitor broadcast
• Distributed video matrix system
• Distributed video wall system
• Remote KVM system control
3. PACKAGE CONTENTS
• 1x 4K UHD+ HDMI over IP Transceiver
• 1x 12V/3A DC Power Adapter
• 1x Power Cord
• 1x Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as a media player, video game console, PC, or set-top box
• HDMI receiving equipment such as an HDTV, monitor, or audio amplifier
• Analog audio receiving equipment such as headphones, an audio amplifier or
powered speakers
• A 10 Gigabit Ethernet network switch with jumbo frame and IGMP snooping support
is required for distributed video systems (Optional, required for multi-transmitter/
receiver systems)
• IP Master (EXT-PROCTRL) Controller or PC control software to configure distributed
matrix, video wall or multi-view systems (Optional)
5. FEATURES
• HDMI 2.0 and DVI 1.0 compatible
• HDCP 2.2 and HDCP 1.x compliant
• Configurable as either a transmitter or a receiver
• 1 HDMI input
• 1 HDMI output (Functions as local monitor output in Transmitter Mode)
• 1 analog stereo audio jack (Functions as an input in Transmitter Mode or an output in
Receiver Mode)
• 2 USB 2.0 (Type A) ports and 1 USB 2.0 (Mini B) port
• Ultra-light compression, lossless for most content
• Extension up to 100m in Point-to-Point mode (with Cat.6A cable)
• Supports independent breakaway A/V matrix switching with minimum latency, video wall
generation, and multi-view compositing (requires optional IP Master (EXT-PROCTRL)
Controller/control software)
• Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Bypass modes only)
• Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and
HD Bitstream from HDMI sources
• Analog stereo audio extension, insertion and extraction (insertion and extraction requires
6
optional IP Master (EXT-PROCTRL) Controller/control software)
• Bi-directional IR, RS-232, USB 2.0, and Ethernet extension
• Supports a special Simultaneous Mode for USB extension allowing
• a host connected to a single transceiver to connect to up to 7 transceivers with USB devices
connected (mass storage devices are not supported in this mode)
• Unit can be powered directly by PoE when connected to a 10 Gigabit Ethernet (10GbE)
switch that provides PoE (802.3at)
• Basic configuration via front panel buttons with an On-Screen
• Display (OSD)
• Supports the use of an external control center (IP Master (EXT-PROCTRL) Controller) or
control software to provide expanded functionality (Contact your authorized dealer for
more information)
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1. POWER LED: This LED will illuminate to indicate the unit is on and receiving power.
2. T/R LED: This LED indicates if the unit is in Transmitter (Green LED) or Receiver (Amber
LED) mode.
3. SOURCE LED: This LED will illuminate when the local HDMI input is live and selected.
4. USB 2.0 (Type A) Ports: Connect directly to standard USB devices such as a mouse,
keyboard or flash drive to extend their USB functionality to the currently active/routed
USB Device Mode transceiver.
5. STATUS LED BLOCK
A. GbE LED: This LED will illuminate and blink to indicate a live and active connection on
the gigabit Ethernet port.
B. VIDEO LED: This LED will illuminate when a video signal is live on the 10GbE
streaming port. When no video is active the LED will remain off, even if the streaming
connection is valid.
C. TX & RX LINK LEDs: These LEDs will illuminate and blink to indicate data
transmission and reception activity across the 10GbE streaming connection.
D. USB LED: This LED will illuminate when the unit’s USB ports have successfully paired
with the USB ports on another unit. This LED will blink if the unit’s USB ports are not
currently paired and in stand-by mode.
6. MENU BUTTON: Press to enter the OSD menu, or to back out from menu items.
7
7. - (MINUS) BUTTON: Press to move up or adjust selections within OSD menus. When not
in a menu, press to manually toggle between inputs (Receiver Mode only).
8. + (Plus) BUTTON: Press to move up or adjust selections within OSD menus. When not in
a menu, press to manually toggle between inputs.
9. ENTER/INFO BUTTON: When inside an OSD menu, press to confirm a selection or to go
deeper into a menu item. When not in a menu, press to activate the Information OSD.
6.2 Rear Panel
1. HDMI OUT PORT: Connect to an HDMI TV, monitor or amplifier for digital video and
audio output.
2. HDMI IN PORT: Connect to HDMI source equipment such as a media player, game
console or set-top box.
3. CAT5e/6A PORT: Connect directly to a compatible transmitter/ receiver for Point-to-
Point extension, or to a 10 Gigabit Ethernet switch for distributed matrixing (requires
IP Master (EXT-PROCTRL) Controller or control software), with a single Cat.5e/6/7
cable for extension of all data signals.
Note: If the connected network switch supports the IEEE 802.3at- 2009 PoE (Power over
Ethernet) standard, this unit can optionally be powered directly via this Ethernet port.
4. AUDIO PORT:
A. Transmitter Mode: Connect to the stereo analog output of a device such as a CD
player or PC.
B. Receiver Mode: Connect to powered speakers or an amplifier for stereo analog
audio output.
Note: The signal is passed directly from the audio port on the transmitter to the audio port on
the receiver in Point-to-Point configurations.
5. IR OUT PORT: Connect to an IR Blaster to broadcast IR signals from a connected
transmitter/receiver to devices within direct line-of- sight of the IR Blaster.
Note: Currently, only 38KHz IR signal extension is supported.
8
6. IR IN PORT: Connect to an IR Extender to receive IR control signals and extend them
to devices connected to a connected transmitter/receiver. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
Note: Currently, only 38KHz IR signal extension is supported.
7. RS-232 TERMINAL BLOCK: Connect directly to a PC, laptop or serial controllable
device with a 3-pin adapter cable to extend the RS- 232 signal between a transmitter
and receiver.
8. SERVICE/USB 2.0 (Mini B) Port: Connect directly to a standard USB host such as a
PC or laptop to extend their USB functionality to all currently connected/routed USB
devices.
Note: This port is only active when “USB Control Mode” is set to “Device”. In a Point- to-Point
extension configuration, only one transceiver should be set as a USB Device at a time.
9. LAN PORT: Connect to an Ethernet supporting device or to your local network as
appropriate to extend the network between the transmitter and receiver.
10.DC 12V PORT: Plug the 12V DC power adapter into this port and connect it to an AC
wall outlet for power.
Note: Optional, not required if the unit is powered via PoE.
6.3 IR Cable Pinouts
9
6.4 RS-232 Bypass Pinout
6.5 OSD Menu
All functions of this unit can be controlled by using the OSD (On Screen Display) which
is activated by pressing the MENU button on the front of the unit. Use the + (PLUS),
- (MINUS), and ENTER buttons to navigate the OSD menu. Press the MENU button to
back out from any menu item and then press it again to close the menu.
The individual functions of the OSD will be introduced in the following section. Items
marked in BOLD are the factory default settings.
10
1. Display Information: Enable or disable the Information OSD.
2. Information Timeout: Set the display timeout for the Information OSD.
3. Menu Timeout: Set the display timeout for the OSD Menu.
4. Menu H Position: Set the horizontal position of the OSD Menu.
Note: Independent values are saved for Transmitter and Receiver modes.
5. Menu V Position: Set the display timeout for the OSD Menu.
Note: Independent values are saved for Transmitter and Receiver modes.
Table des matières
