KAM LED Hexaflower 1 DMX Manuel utilisateur

For the latest product updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom U6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: [email protected] • Web: www.lambaplc.com

INSTRUCTION MANUA

LED Hexaflower 1 DMX

6 lens ED flower effect with DMX

RGB unit that produces stunning flower effects

Multi red, green and blue high power EDs

6 angled glass lenses for dispersion

Motor controlled moving light beams

Sound-to- ight and DMX modes

9 channel DMX512 operation

No fan due to cool ED operating temperature

Metal chassis and adjustable hanging bracket

Mains fused IEC

MANUA VERSION 1.0

Kam LED Hexaflower 1 DMX

6 lens ED flower effect with DMX

Thank you for purchasing this product, we hope that it serves you for many years to come.

To optimise the performance of this product, please read these operating instructions carefully to

familiarise yourself with the basic operations of this unit.

This unit has been tested at the factory before being shipped to you.

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to high temperature and

rain or moisture.

Unpacking

Please unpack your new product carefully, your new product should reach you in perfect condition. Please check

that no damage has occurred during transit. If any damage is found, do not operate your unit. Please contact the

retailer you purchased it from immediately.

afety

This unit operates on 240V AC. This appliance must be earthed.

This product is for indoor use only, do not expose to rain or moisture. Always store unit in a dry place.

If there is any damage to the mains cable do not use the device.

Always disconnect the unit from the mains supply when carrying out any servicing or cleaning of the unit.

The unit must not be connected to dimming-packs.

Never look directly into any light source as this may damage eyes.

There are no user serviceable parts in this unit, please consult your retailer for any repair work.

Operation

To prolong the life of your unit it is recommended that the unit is not for constant us. eaving a break between long

periods of use will increase the life span of your unit.

When choosing the installation position, please make sure that the device is not exposed to extreme temperature,

moisture, and that no air ways are blocked, keep a good distance from materials etc.

When using smoke machines/foggers, make sure that the device is never exposed to the direct smoke jet and is

installed at distance of 0.5 meters away from other surfaces. Always fix the fixture with an appropriate safety-

chain. The maximum ambient temperature Ta = 45°C must never be exceeded.

Installation / Overhead rigging

Caution: any units installed in an overhead position may cause severe injuries if not installed correctly or safely.

Please ensure the mounting structure is secure and stable, and is capable of holding 10 times the weight of the

unit to be installed. Always use suitable hanging/mounting brackets or clamps. Always fit a suitable safety chain.

If in any doubt about installation please contact a qualified technician.

Replacing the fuse

If the fuse of the unit fuses, only replace the fuse by one of the same type and rating.

Before replacing the fuse, unplug mains lead.

Step 1: Open the fuse holder on the rear panel with a screwdriver.

Step 2: Remove the old fuse from the fuse holder.

Step 3: Install the new fuse in the fuse holder.

Step 4: Replace the fuse holder in the housing.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your retailer or local Kam Service Station.

DMX512 connection / connection between units

All DMX cables must be wired correctly, with suitable 2 core screened cable. The signal lines must be separate and

no cables should be bridges. Please check this if you are trying to use a microphone cable as these are often

balanced leads and will not work for DMX purposes.

If you are using a DMX controller with this unit, you can connect the DMX output of the controller directly into the

DMX input of the first unit in the DMX chain.

Building a serial DMX chain

Connect the DMX output of the first unit in the DMX chain to the DMX input of the next unit. Always connect one

output with the input of the next fixture until all units are connected.

Master/ lave operation

The Master/Slave operation enables several devices to be synchronised and controlled by one master device.

On the rear panel of the unit you will find X R input and X R output sockets which can be used for linking devices.

Choose the device which is to control the effects. This device will work as the Master device and controls all other

connected units, these are known as the Slaves. Set all DIP switches to OFF in order to determine the Master

device. Set DIP Switches 1 and 10 to ON in order to determine the Slave devices.

Basic operation

After connecting the unit to the mains it will start operating. You can adjust the microphone sensitivity with the

rotary control on the rear panel.

ound-to-Light operation

For sound controlled operation set all DIP Switches to OFF.

DMX operation

You can control the lens colour individually via your DMX controller. Every DMX channel has a different operation

with different features. For DMX controlled operation set DIP switch 10 to ON.

DMX addressing

Each unit occupies 9 DMX channels. To ensure that the control signals are properly directed to each unit

the unit requires addressing. This has to be adjusted for every single unit by changing the DIP switches as set out

in the table below. The starting address is defined as the first channel from which the device will respond to the

controller. Please make sure that you do not have any overlapping channels in order to control each device

correctly and independently from any other unit on the DMX data link. If two, three or more devices are addressed

similarly, they will work similarly.

987654321

2561286432168421

DMX starting address

Unit 1 - channel 1

OFF

Unit 2 - channel 10

Unit 3 - channel 19

Unit 4 - channel 28

Unit 5 - channel 37

DIP switch number

Channel DMX value Description

The first 6 channels correspond to 000 – 010 Off

each lens. For example channel 1 011 – 045 Red on

controls lens 1, channel 2 controls 046 – 080 Green on

lens 2 and so on up to channel 6 081 – 115 Blue on

116 – 150 Red and green on

151 – 185 Red and blue on

186 – 220 Green and blue on

221 – 255 Red, green and blue on

Channel 7 - strobe 000 – 010 Off

011 – 255 Flashes with increasing speed

Channel 8 - Auto mode / progs / mode 000 – 010 Off

011 – 024 Program 1

025 – 038 Program 2

039 – 052 Program 3

053 – 066 Program 4

067 – 080 Program 5

081 – 094 Program 6

095 – 108 Program 7

109 – 122 Program 8

123 – 136 Program 9

137 – 150 Program 10

151 – 164 Program 11

165 – 178 Program 12

179 – 192 Program 13

193 – 206 Program 14

207 – 220 Program 15

221 – 250 Program 16

251 – 255 Sound-to- ight mode

Channel 9 - speed in Auto mode 000 – 255 Increasing speed

Technical specifications

Power supply: 230V AC, 50Hz ~

Power consumption: 20W

Number of DMX channels: 9

DMX512 connection: 3 pin XLR

Sound control: via built-in microphone

Maximum ambient temperature Ta: 45°C

Maximum housing temperature TB (steady state): 50°C

Minimum distance from flammable surfaces: 0.50m

Minimum distance to lighted object: 0.10m

Fuse: F1A, 250V

Number of EDs: 90

Beam angle: 150°

Dimensions ( xWxH): 285 x 375 x 165mm

Weight: 3Kg

Due to continuous product development, specifications and appearance are subject to change.

If this product is ever no longer functional please it take to a recycling plant for environmentally friendly disposal.

Autres manuels KAM Matériel de DJ

KAM

KAM KML305 Manuel utilisateur

KAM

KAM LED Quadbar 1 DMX Manuel utilisateur

KAM

KAM Trilogy Manuel utilisateur

KAM

KAM SuperStar Cluster RGB Manuel utilisateur

KAM

KAM Gobolaser 550RB Manuel utilisateur

KAM

KAM Star Cluster 300RGB Manuel utilisateur

KAM

KAM Derby FX-Bar Manuel utilisateur

KAM

KAM XY Laser Manuel utilisateur

KAM

KAM InfinityBeam Manuel utilisateur

KAM

KAM KSD2 Manuel utilisateur

KAM

KAM Powercan15W Manuel utilisateur

KAM

KAM FloodBank1 Manuel utilisateur

KAM

KAM LED PARTYBAR Manuel utilisateur

KAM

KAM KSM Vegas LED Manuel utilisateur

KAM

KAM LASERSCAN 1000 3D Manuel utilisateur

KAM

KAM K-Strip12 Manuel utilisateur

KAM

KAM K-UV 16X3W Manuel utilisateur

KAM

KAM LED White192 Panel Manuel utilisateur

KAM

KAM iLINK RVP Manuel utilisateur

KAM

KAM Laserscan Hyper 3D Manuel utilisateur

KAM

KAM LED Spiro 1 Manuel utilisateur

KAM

KAM DMX Laser 40 Manuel utilisateur

KAM

KAM Energy SD300 Manuel utilisateur

KAM

KAM Digi Mini Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur