Kaba Mas AUDITCON 2 Series Manuel utilisateur

The following instructions cover Model 52 & T52 Super Master Operations. The

lock is shipped with a six-digit factory default Super Master User Combination

that can be set (i.e., changed) when the lock is in its default status from the

factory. Once the Super Master User Combination is set, it can only be used to

unlock the lock and reset it to the factory default combination (502550) in the

event the user combination(s) are lost.

WARNING:

The setting of the Super Master User Combination is optional. If you

do not change the default Super Master Combination prior to changing any user

combinations, the Super Master reset capability will be permanently lost.

Important Note:The lock must be manually powered before each operation by

briskly turning the dial back and forth 44

44

433

33

3.

SET SUPER MASTER COMBINATION

Caution:

Once the Super Master Combination is set, it can never be changed.

1. Press #and then 0.

G

8

2. Enter the factory default Super Master Combination of “120943”.

G

8

3. Enter the new six-digit Super Master Combination.

G

8.

4. Enter the new Super Master combination again for verification.

GR

5. Record the combination and store it in a secure place.

AUDITCON®2 SERIES

MODELS 52 & T52

SUPER MASTER OPERATIONS

Document Number 3055.025 Rev. B - 05/06

DETECT IF SUPER MASTER COMBINATION IS ACTIVE

1.Press #and then 9.

If the Super Master User combination has not been disabled (i.e., no

User combination has been changed) and has not been activated,

two red flashes

R

R

display.

If the Super Master combination is active,

five red flashes

R

R

R

R

R

display.

If the Super Master combination has been permanently disabled,

a green flash

G

displays.

RESET LOCK USING SUPER MASTER COMBINATION

1. For a Dead Bolt, place the dial in the Home position.

2. Press #and then 0.

G

8.

3. Enter the Super Master combination.

The lock will respond as follows to indicate that the lock is ready to open:

Dead Bolt - 1 slow green flash

G

Slide Bolt - Continuous green flashes

G

... for approx. 5 seconds

4. For a Dead Bolt, dial right (clockwise) until the lock bolt is retracted. For a

Slide Bolt, rotate the container handle to unlock.

Note:

The lock is now set to the factory default: Single Mode with an opening

combination of “502550”.

© 2005-2006 Kaba Mas Corporation. All rights reserved.

Kaba Mas Corporation

749 W. Short Street, Lexington, KY 40508 USA

Phone: (859) 253-4744 FAX: (859) 255-2655

Technical Support: (800) 950-4744

www.kaba-mas.com

Autres manuels pour AUDITCON 2 Series

3

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels Kaba Mas Verrouillage

Kaba Mas

Kaba Mas Cencon 4 Manuel utilisateur

Kaba Mas

Kaba Mas CDX-10 Manuel

Kaba Mas

Kaba Mas 252 Manuel utilisateur

Kaba Mas

Kaba Mas Auditcon 252V Manuel utilisateur

Kaba Mas

Kaba Mas AUDITCON 2 Series Manuel utilisateur

Kaba Mas

Kaba Mas LA GARD BASIC 3802 Manuel utilisateur

Kaba Mas

Kaba Mas LA GARD COMBOGARDPRO 39E Manuel

Kaba Mas

Kaba Mas X-09 Manuel utilisateur

Kaba Mas

Kaba Mas UNICON Manuel utilisateur

Kaba Mas

Kaba Mas X-10 Manuel utilisateur

Kaba Mas

Kaba Mas AUDITCON 2 Series Manuel utilisateur

Kaba Mas

Kaba Mas Unicon CL Series Manuel utilisateur

Kaba Mas

Kaba Mas LA GARD SMARTLINC Instructions de fonctionnement

Kaba Mas

Kaba Mas Unicon CL Series Manuel utilisateur

Kaba Mas

Kaba Mas LA Gard Combogard 33E Manuel du propriétaire

Kaba Mas

Kaba Mas LCLX Manuel utilisateur

Kaba Mas

Kaba Mas Unicon CL Series Manuel utilisateur

Kaba Mas

Kaba Mas X-09 Manuel utilisateur

Kaba Mas

Kaba Mas Unicon CL20 Manuel utilisateur

Kaba Mas

Kaba Mas CDX-09 Manuel

Kaba Mas

Kaba Mas AUDITCON 2 Series Manuel utilisateur

Kaba Mas

Kaba Mas X-10 Manuel utilisateur

Kaba Mas

Kaba Mas Low Profile 52 series Manuel utilisateur

Kaba Mas

Kaba Mas X-09 1F Manuel utilisateur

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur