JVC TH-BY370A Manuel utilisateur

Soundbar: Under the TV(if wall-mounted)/ In front of the TV

Subwoofer: On the ﬂoor, alongside the TV (or in the front corner of

the room)

RECOMMENDED PLACEMENT

2.1 CH SOUNDBAR

This product is not a toy! Children should be supervised to ensure that they do not

play

15.When removing the power plug from the wall outlet, always pull directly on the plug;

with liquids; do not place unit on windowsills or other places where it may be

Using the remote control:

1. Battery spec: 2 x AAA, place the battery into the battery compartment,

ensuring correct polarity. After inserting the battery, replacethe battery

compartment cover.

2. Remove the battery, if the remote control will not be used for a longer

period of time as it mightbe damaged by leaking batteries.

1.POWER

Switch the unit between ON and STANDBY

mode

2. PREV

Play previous song, or choose previous mode

3. VOL-

Reduce the volume

4. NEXT

When playing music, it goes tothe next song, or

when selecting modes, choose the next mode

5. MODE

The choices are: B/T,OPT, COA,AUX, FM; If

you plug in a USB device, the options would be:

"B/T, USB,OPT, COA, AUX, FM"

6. TREBLE-

Reduce treble

7. REPEAT

In USB mode, press ‘REPEAT’ button once to

repeat a single song ; press again to repeat all

songs

8. BASS-

Reduce bass

9. EQ

Sound mode switch

10. RESET

Press to go back to the initial default

settings

11. TUNING-

Press and release to tune channels

manually. Press and hold to enter half

auto channel state where it auto tunes

to the available lower frequency

12. PLAY/PAUSE

Play music/ Pause music

13. MUTE

No sound

14. VOL+

Increase the volume

15. TREBLE+

Increase treble

16. BASS+

Increase bass

17. 3D

3D sound effect switch

18. TUNING+

Press and release totune channels manually.

Press and hold to enter half auto channel

state where it auto tunes to the available

higher frequency.

19. FM SCAN

Press to auto search available channels

Do not impede ventilation by covering ventilation

openings with cloths, curtains or similar items.

16. Do not expose the batteries to excessive heat, direct sunlight, fire or similar.

17. Do not throw used batteries in your household rubbish. Dispose of it responsibly according

to local regulations.

Front/ Back panels

Operating Instructions

1. POWER ON: Turn on the power switch on the back of the sound bar; the

sound bar and subwoofer will now be in Standby mode. The indicator light on

the front panel shows red.

2. ON/ STANDBY: Press the ‘STANDBY’ button on the front of the sound bar

OR the ‘POWER’ button on the remote control to switch on the unit. The

indicator light shows blue.

Bluetooth Mode:

1. Press the ‘MODE’ button repeatedly until Bluetooth Mode is selected. Display

shows BLUE.

2. On your Bluetooth-enabled device, choose ‘TH-BY370A’, the name of the

sound bar. The indicator blinks indicating that it is pairing and there is a beep

sound. Once pairing is successful, the indicator remains on.

3. Now you can play music from your Bluetooth-enabled device on the sound

bar. Press the ‘PREV/ ‘NEXT’ button on the remote control to play the

previous or next song.

USB Mode:

1. Connect a USB memory device to the USB port.

2. Press the ‘MODE’ button repeatedly until USB Mode is selected. Display

shows ‘USB’.

3. Now you can play music from the USB device on the sound bar.

Notes:

In any working state, the mode automatically switches to USB when the USB

device is plugged in.

The music will be played in the same order as on the USB disk. If song

numbers are assigned, you can use numeric buttons on remote control to play

a particular song.

The USB device must be formatted in “FAT 16/FAT32/EXFAT”, maximum

size of device possible is 32G.

Only mp3 formats can be played.

Optical/ Coaxial/AUX mode:

1. Connect the device using any of these modes.

2. Press MODE button repeatedly until the corresponding mode is selected.

Display shows ‘OPT’/ ‘COA’/ ‘AUX’.

3. Now you can play music from the connected device on the sound bar.

FM Radio function:

1. Press ‘MODE’ button repeatedly until ‘FM’ mode is selected. The display

shows station frequency.

2. Press ‘FM SCAN’ on the remote control to auto search the available

channels. These channels are stored in working state.

3. Press ‘TUNING -‘ and ‘TUNING +’ buttons to tune channels manually.

4. Press and hold ‘TUNING -‘ or ‘TUNING + ’ buttons to enter half auto search

channel state. Here, it searches the available frequencies and stops at the

next lower (TUNING-) or higher (TUNING+) frequency.

4. Important: Do not exceed current 500mA.

Table des matières

Autres manuels JVC Système de haut-parleurs

Manuels Système de haut-parleurs populaires d'autres marques

LG NB4532B Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur

TCL

TCL 6100 Series Manuel utilisateur

JBL

JBL gto6506c Manuel utilisateur

Legacy

Legacy FOCUS SE Manuel utilisateur