JTT T60C Manuel utilisateur
- 1 -
- 2 -
CONTENT
1. SYSTEM COMPOSITION AND ASSEMBLY.............................. - 6 -
1.1. SYSTEM CONFIGURATION LIST .......................................................................- 6-
1.2. ASSEMBLY AND CONNECTION OF AIRCRAFT...............................................- 7-
1.3. OPERATION AND THE USE OF CHARGER ......................................................- 9-
1.4 .DESCRIPTION AND USE OF THE REMOTE CONTROL ............................. - 12 -
2. AIRCRAFT..................................................................................................... - 15 -
2.1. AIRCRAFT MODE.................................................................................................. - 15 -
2.2. STATUS INDICATOR OF AIRCRAFT ............................................................... - 17 -
3. GROUND CONTROL STATION....................................................... - 18 -
3.1.COMPOSITION OF GROUND CONTROL SYSTEM ....................................... - 18 -
3.2. OPERATIONS OF GROUND CONTROL STATION....................................... - 23 -
3.3. SOFTWARE OPERATION.................................................................................... - 27 -
3.3.1. Connection
.............................................................................................- 27 -
3.3.2. Main interface
......................................................................................- 28 -
3.3.3. Quick Access Toolbar
...................................................................- 31 -
3.3.4. Arm/DisArm
...........................................................................................- 35 -
3.3.5. take-off
.......................................................................................................- 36 -
3.3.6. Real-time aircraft guide
................................................................- 36 -
3.3.7. Guided flight
..........................................................................................- 37 -
3.3.8. GUIDED cruise
...................................................................................- 38 -
3.3.9. Automatic Cruise
...............................................................................- 41 -
3.3.10. Interest Point
.....................................................................................- 50 -
3.3.11. LANDING
..............................................................................................- 51 -
3.3.12. RTL
............................................................................................................- 52 -
3.3.13. HOVERING
.........................................................................................- 52 -
3.3.14. ALTHOLD
.............................................................................................- 53 -
3.3.15. Change the height and speed
.............................................- 53 -
3.3.16. Real-time status data
..................................................................- 54 -
- 3 -
3.3.17.fault protection
...................................................................................- 55 -
3.3.18 Geographical rail
..............................................................................- 56 -
4. INSTRUCTIONS FOR FLYING.......................................................... - 57 -
4.1. CHECK UP BEFORE FLYING.............................................................................. - 57 -
4.2. AIRCRAFT CALIBRATION .................................................................................. - 57 -
4.3. ANALYSIS AND ANSWERS TO FAQ.............................................................. - 60 -
4.4. WARRANTY INFORMATION ............................................................................. - 60 -
- 4 -
Danger
Subject to Special Controls, and any wrong operation may result in damage to the
goods, personal injury or even casualty. For any such accident, the user shall bear the
corresponding criminal responsibility. It isn’t recommended that the product is used by
juveniles less than 18 years old. To make better use of this equipment and to ensure
your safety, before you use it, please carefully read the user manual, or to consult with
the after-sales or customer service personnel. You can directly log on the company's
official website (http://www.jttuav.com/) for product-related information.
Warnings
●please keep the electrical parts out of reach of the children;
●to ensure that the aircrafts are away from the crowd and dangerous goods during
●It is recommended that the aircraft flies in a special flight site;
●Do not operate the aircraft when you are tipsy, fatigue, or in poor mental state.
●please operate in strict compliance with the user manual.
●before cruise, make sure that the power supply system and other functional modules
are correctly connected, or else it will result in the overturning of equipment.
●before you perform channel calibration, firmware update and parameter setting for
the remote, please switch off the power supply or remove the airscrew to prevent the
sudden high-speed revolution of motor.
●it is forbidden to fly in severe environment.
●don’t turn on the aircraft system, or modify the equipment structure without
permission. You need to be responsible for any possible consequences thereby.
●Please don't impact, break off or squeeze the electrical stand, and make sure that the
taking off and landing site is flat, or else it may affect the service life of electrical stand.
- 5 -
Disclaimer
1.The products are subject to the Special Controls, and the user will be fully
responsible for the use of this product. The manufacturer does not assume any
responsibility for any consequences caused by direct or indirect use of these products.
2.During the use of this product, the user shall be liable for any violation of public order
or public safety.
3.We do not provide any technical support and security commitments under the
following situations:
（1）The unit or individual who obtains the products through non-normal agent or non-
normal channels.
（2）Products with unauthorized modification, commissioning and replacement of
parts.
（3）The products without warranty card, serial number or flight data. Caused by
personal operation error or natural disasters
- 6 -
1. SYSTEM COMPOSITION AND ASSEMBLY
1.1.System Configuration List
Serial No.
List
1.
T60 airframe *1
T60 arm *6
T60 airframe (including flight control
system, image transmission system, digital
transmission system and electronic system).
T60 arm （including motor, electronic
speed controller and paddle）
2.
T60 stand*2
ground control station *1
3.
remote *1
power battery *3
- 7 -
4.
image transmission antenna *1
data transmission antenna *2
5.
antenna extension cord *2
metal image transmission antenna *2
1.2.Assembly and connection of aircraft
Step 1: open the packaging aluminum case of aircraft and take out the relevant
components of aircraft for further installation.
Step 2: take out two "T-shape stands" from the aircraft parts, and mount them on the
casing of aircraft, and tighten the rotary knob of stand. The specific operation is shown
in Figure 1.2.1 below.
- 8 -
（Figure 1.2.1）
Step 3: connect six arms of aircraft correspondingly according to the number and
tighten them clockwise. The specific operation is shown in Figure 1.2.2.
（Figure 1.2.2）
Step 4: have the supportive data transmission/image transmission antenna of aircraft
installed according to the corresponding locations;
Step 5: instructions for installation of payload equipment
Take out the payloads from the packing case, and quickly install it to the drone, tighten
the quick release device. Connect power line and control line accordingly as shown in
Figure 12.3.
- 9 -
（Figure 1.2.3）
1.3.Operation and the use of charger
The aircraft is charged following the steps below:
Step 1: take out the power battery of ground control station/UAV (unmanned aerial
vehicle).
Step 2: after you have completed the wiring as follows, the power supply unit is
connected to the AC at 220V, and then the aircraft can be powered on by turning on
the rocker switch. Details are shown in Figure 1.3.1.
- 10 -
（Figure 1.3.1）
Step 3: after the charging circuit is correctly connected, first press the STOP/START 1
or STOP/START 2 button and rotate the round button in the middle. Select the battery
option of “0 LiPo” and confirm the setting by pressing the round button in the middle,
as shown in Figure 1.3.2.
（Figure 1.3.2）
Stop or
start
button
Round
button
Ce manuel convient aux modèles suivants
1
Table des matières
