Johnson Level & Tool 40-6560 Manuel utilisateur

Automatic-Leveling Rotary Laser Level

with GreenBrite™ Technology

Model Nos. 40-6560 and 40-6570

Instruction Manual

Congratulations on your choice of this Automatic-Leveling Rotary

Laser Level with GreenBrite Technology. We suggest you read this

instruction manual thoroughly before using the instrument. Save this

instruction manual for future use.

This tool emits one rotating laser beam level line that is ideal for lay-

out of indoor or outdoor construction projects. Since the product is

equipped with a laser beam detector, visibility of the beam in various

lighting conditions is not an issue.

This is a Class IIIa laser tool and is manufactured to comply with CFR 21,

parts 1040 .10 and 1040 .11 as well as international safety rule IEC 285.

™

40-6560_6570 English 5/5/05 4:30 PM Page 1

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety Instructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Operating Instructions

7. Using the Product

8. Self-Check and Calibration

9. Technical Specifications

10. Application Demonstrations

11. Care and Handling

12. Product Warranty

13. Product Registration

14. Accessories

1. Kit Contents

Description Model No. 40-6560 Qty.

Automatic-Leveling Rotary Laser Level with GreenBrite™ Technology 1

Ni-MH Rechargeable Battery Pack 1

6V Battery Adapter 1

Remote Control with 9V Battery 1

Detector with 3 “AAA” Batteries and Quick Clamp 1

Magnetic Target 1

Tinted Glasses 1

Instruction Manual with Warranty Card 1

Hardshell Carrying Case 1

Description Model No. 40-6570 Qty.

Automatic-Leveling Rotary Laser Level with GreenBrite™ Technology 1

Ni-MH Rechargeable Battery Pack 1

6V BatteryAdapter 1

Multi-Function Mount with Carrying Case 1

Remote Control with 9V battery 1

Detector with 3 “AAA” Batteries with Quick Clamp 1

Magnetic Target 1

Tinted Glasses 1

Aluminum Tripod 1

8ft. Grade Rod with Carrying Case 1

Instruction Manual with Warranty Card 1

Hardshell Carrying Case 1

40-6560_6570 English 5/5/05 4:30 PM Page 2

2. Features and Functions

• Green beam is 400% brighter than red beam laser levels.

• Large electronic auto-level range, the unit can work normally

within ±5°. When beyond the leveling range, the laser line

will flash, rotation of the beam will stop, and an audible alarm

will activate.

• Slope operation function facilitates user of performing slope

scan at different inclinations.

• Out of balance alarm function ensures product accuracy.

• Dust and rain resistant.

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may result in bodily injury.

CAUTION: If using this product with anytype of tinted goggles,

please note safety warning below.

DANGER!

Class IIIa Laser Product

Max. Power Output: ≤5mW

Wavelength: 522-542nm

THIS TOOL EMITS LASER RADIATION.

DO NOTSTARE INTO BEAM.

AVOID DIRECT EYE EXPOSURE.

40-6560_6570 English 5/5/05 4:30 PM Page 3

WARNING!

The tinted goggles are designed to enhance

the visibility of the laser beam. They DO NOT

offer protection to the eyes from direct exposure

of the laser beam.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from

tool.

• Use of controls or performance of procedures other than those specified herein may

result in hazardous radiation exposure.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injurymay result.

•Always turn the laser tool off when not in use or left unattended for a period of time.

•Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

•Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt

to repair this tool, serious injury may result.

•Use only original AccuLine Pro™parts and accessories purchased from your AccuLine

Pro authorized dealer. Use of non-AccuLine Pro parts and accessories will void warranty.

40-6560_6570 English 5/5/05 4:30 PM Page 4

4. Location/Content of Warning Labels

40-6560_6570 English 5/5/05 4:30 PM Page 5

5. Location of Part/Components

Rotating Laser Output Window

Handle

BatteryCover DC 6V Power Jack

Plumb Laser Beam Output Window

Operation Panel

40-6560_6570 English 5/5/05 4:30 PM Page 6

6. Operating Instructions

IMPORTANT: It is the responsibility of the user to verify the calibration

of the instrument before each use.

Battery Installation

Note: Always check to be sure that the on/off switch is in the off

position before removing and replacing batteries.

Alkaline Battery Installation

1. Unscrew the press board of the alkaline battery case and remove

the battery cover.

2. Put in 4 “C” alkaline batteries (not included) according to the

illustrated polarity direction.

3. Screw the press board to press against batteries.

Ni-MH Rechargeable Battery Pack Installation

1. Unscrew the press board of the alkaline battery case and remove

the battery cover.

2. Put in the Ni-MH rechargeable battery pack according to the

outward direction of plug down-lead. Then insert the down-lead

plug into jack inside the instrument.

3. Screw the press board to press against batteries.

Ni-MH Rechargeable BatteryCharging

Using the battery adapter (included), charge the rechargeable battery

pack through the outlet jack. When the charge indicator lamp turns

from red to green (after five hours or so), the Ni-MH rechargeable

battery pack has been fully charged.

40-6560_6570 English 5/5/05 4:30 PM Page 7

Note:

(1) Even after battery pack appears to be full charged, we suggest

users continue to charge for 2 more hours to ensure the battery-

pack’s maximum charge capacity.

(2) We also suggest charging a new battery during its initial charge

for at least ten hours.

(3) The instrument will still work even if it being charged with

adapter.

(4) Do not charge alkaline batteries to avoid explosion.

(5) Used (discharged) batteries are hazardous waste and should be

disposed of properly.

Instrument Usage

1. Put in Ni-MH rechargeable battery pack, or 4 “C” alkaline batteries

(not included), or connect with the 6V DC power through the

power jack.

2. Place the instrument on a platform or tripod, connecting with tripod

to the 5/8” screw thread at the bottom of the instrument.

Note: If the instrument is inclined beyond the self-leveling range,

the instrument will deliver an audible alarm. You will need to

re-position the instrument until it can be leveled.

3. Press power switch to turn power on, and press operation buttons

on control panel or use remote control to adjust to your desired

working status.

4. After finishing operation or before moving the instrument, turn the

power off.

40-6560_6570 English 5/5/05 4:30 PM Page 8

7. Using the Product

Operating Panel

Power On/Off

1. Press the power button to power on. The

power indicator lamp should light up and then

the instrument will automatically level itself,

with rotation occurring once the unit is level.

2. Press the power button again to power off.

Low BatteryIndication

If the battery indicator lamp is lit, this means low

battery voltage. To ensure normal operation, replace

batteries or charge the rechargeable Ni-MH battery pack.

Alarm If Beyond Range

If the instrument is inclined beyond the self-leveling

range of ±5° , it will deliver an audible alarm, and

the power indicator lamp will blink. You will need

to re-position the instrument until it is within the

leveling range.

Instrument Panel Remote Control Panel

40-6560_6570 English 5/5/05 4:30 PM Page 9

Safety Mode (TILT)

1. After powering on the instrument and entering into

auto-level status, press the tilt button. When the

indicator lamp lights us (see figure), the instrument

enters into TILT mode. If the leveled instrument is

moved or bumped, the head will stop rotation and the TILT indicator

lamp will flash instead of the unit performing the auto-level function.

At this time, you must press the tilt button to quit safety mode and

enter into auto-level status.

2. Press the tilt button to quit safety mode and activate auto-level mode.

Slope Adjusting Function (SLOPE)

The function must be operated by the remote control (see operating

panel shown in fig.1).

1. Select slope adjusting direction

The first press of X/Y button will illuminate the X indicator lamp

(fig. 2) and you should then select the X-direction slope adjustment

(see below). The second press of X/Y button will illuminate the Y

indicator lamp (fig. 3) and you should then select the Y-direction

slope adjustment. The third press of the X/Y button will quit the

slope-adjusting function and enter the unit into auto-level status.

2. Adjust the slope angle

Press either of the two arrow

keys on remote control (fig.1) to

adjust slope angle.

Note: Asingle press of either key

activates fine tuning while a

continuous pressing activates

quick adjustment.

40-6560_6570 English 5/5/05 4:30 PM Page 10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Johnson Level & Tool Niveau laser

Johnson Level & Tool

Johnson Level & Tool 1435-1000D Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6625 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6060 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6164 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6164 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6522 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 9105/40-0910 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6675 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool JLX 5700D Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 1760-2400 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool JLX 5700D Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6515 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-0918 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6065 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-0915 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 40-6526 Manuel utilisateur

Johnson Level & Tool

Johnson Level & Tool 1455-0000 Manuel utilisateur

Manuels Niveau laser populaires d'autres marques

Nedo

Nedo ET-5 Manuel utilisateur

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manuel utilisateur

LaserLiner

LaserLiner X2-Laser Manuel utilisateur

Spectra

Spectra LL300N Manuel utilisateur

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manuel utilisateur

Nedo

Nedo Crossliner 4 Manuel utilisateur

Lasertec

Lasertec FX360G Manuel utilisateur

Flex

Flex ALC 8 Manuel utilisateur

Black & Decker

Black & Decker LZR5 Manuel utilisateur

Johnson

Johnson 40-6692 Manuel utilisateur

Cocraft

Cocraft HL 20-SG Manuel utilisateur

Zircon

Zircon iLine Manuel utilisateur

HWH

HWH 310 SERIES Manuel utilisateur

Leica

Leica iCON robot 60 Manuel utilisateur

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manuel utilisateur

LaserLiner

LaserLiner ActiveFinder XP Manuel utilisateur

DeWalt

DeWalt DW082 Manuel utilisateur

imex

imex EL20 Manuel utilisateur