Johnson Controls IQ4 NS Manuel utilisateur

The IQ4 NS is an All-In-One control panel, providing full security and smart home functionality

INSTALLATION MANUAL

IQ4 NS

Software Version 4.3.0

INTRODUCTION

ABOUT THIS GUIDE

QOLSYS CONFIDENTIAL AND PROPRIETARY

PAGE OF2158

QUESTIONS?

[email protected]

This document outlines the basic hardware specifications and software directions to

install and customize the IQ4 NS. Note that the information presented is not

comprehensive, but is specifically dedicated to those menus, features, and systems

accessible solely to those with the proper installation code. Features accessible to

users and installers alike are outlined in the IQ4 NS User Guide. In this document,

reference to “EN Grade 2” refers to EN50131 Grade 2 Certified product. The

information contained herein is proprietary, and is solely owned by Qolsys Inc. Any

reproduction, modification or distribution without permission is strictly prohibited.

IQ4 NS

Power

Supply

INCLUDED IN BOX

SUPPORT

TABLE OF CONTENTS

PANEL OVERVIEW

5- Exterior Front

6- Exterior Back

7- Interior

INSTALLING THE PANEL

9- Wall Mount

10- Table Stand Option

11- Wiring Diagram

12- Powering the Panel

USER INTERFACE

14- LED Indicators

15- Speaker Annunciations

PROGRAMMING

17- IQ Installer Interface

18- Connecting to IQ Installer

19- Setup Wizard

20- Configuration

22- User Management

23- Installation

SECURITY SENSORS

25- Security Sensors

26- Auto Learn Sensor

27- Add Sensor

28- Sensor Type

29- Sensor Name

30- Sensor Groups

47- Chime Type

48- Voice Prompts

49- Partition Name

50- Source

51- Edit Sensor

52- Delete Sensor

WI-FI DEVICES

54- Wi-Fi Devices

55- Access Point Options

56- IQ Remote Devices

57- 3rd Party Connections

Z-WAVE™ DEVICES

59- Z-Wave Devices

60- Add Device

61- Clear Device

62- Remove all Failed

63- Remove All Z-Wave

64- Z-Wave Options

INSTALLER/DEALER SETTINGS

66- Installer/Dealer Settings

75- System Logs

76- Siren and Alarms

79- Security and Arming

83- Sound

87- Partitions

SYSTEM TESTS

88- System Tests

89- Wi-Fi Test

90- Sensor Test

91- Cellular Test

92- Z-Wave Test

93- Rediscover Network

94- Neighbor Info

95- Counters

97- Advanced Z-Wave Diag

98- PowerG Test

100- Dual Path Test

101- Daughter Cards Test

102- Panel Test

CUSTOMIZATION

104- Contact Info

105- Dealer Logo

106- Connecting to Wi-Fi

MAINTENANCE

108- Upgrade Software

109- Upgrade Software Using Wi-Fi

110- Upgrade Software via Panel AP

111- Background Download Updates

112- Battery Replacement

TROUBLESHOOTING

115- About

118- Power Down

119- Panel Reboot

120- Hard Reboot

121- Panel Test Troubleshooting

LEGAL

124- Important Information

SPECIFICATIONS

141- Specifications North America

143- Supported 319 MHz S-Line

Sensors

144- Supported 345 MHz Sensors

145- Supported 433 MHz (DSC) Sensors

146- Supported 433 MHz (AT&T) Sensors

147- Supported PowerG Sensors

148- Supported Zigbee Sensors

149- Specifications Europe & UK

151- Supported PowerG Sensors EU & UK

152- Supported 433 Sensors Iceland

153- Specifications Latin America

155- Supported PowerG Sensors LatAM

156- Specifications Brazil/Costa Rica

PANEL

OVERVIEW

For US and CANADA: Warning: This Product should be installed in accordance with the National Fire Alarm Code, ANSI/NFPA 72, (National Fire Protection Association, Batterymarch Park,Quincy, MA 02269)

and with National Electric Code, ANSI/NFPA 70. Printed information describing proper installation, operation, testing, maintenance, evacuation planning, and repair service is to be provided with this Product. In

Canada the product shall be installed in accordance with the Standard for the Installation of Residential Fire Warning Systems, CAN/ULC-S540.

Warning: For Canadian installations this Product and all sensors associated with it (collectively, the “System”) should be tested once a week. The test shall be performed also with primary DC power de-

energized. For recommended smoke detectors maintenance instructions refer to user manual associated with compatible Qolsys model QS5110-840 and PowerG model PG9936 smoke detectors.

For All Countries: Warning: This Product should be installed in accordance with the National and Local Fire Codes and National and Local Electrical Codes. Printed information describing proper installation,

operation, testing, maintenance, evacuation planning, repair service, recycling and disposal is to be provided with this Product. Warning: For all installations this Product and all sensors associated with it

(collectively, the “System”) should be tested once a week. The test shall be performed also with primary DC power de-energized. For all Sensors, Detectors, and other accessories, follow the recommended

maintenance instructions for each device.

PANEL OVERVIEW

EXTERIOR FRONT

QOLSYS CONFIDENTIAL AND PROPRIETARY

PAGE OF5158

Power LED

Speaker & Siren

Status LED

PANEL OVERVIEW

EXTERIOR BACK

For EN Grade 2

applications, these

mounting holes

shall be used

Single, double or

triple gang box

compatible

QOLSYS CONFIDENTIAL AND PROPRIETARY

PAGE OF6158

Locking Screw w/

Retention Spring

For UL2610 and EN Grade

2 applications this screw

shall be used for tamper

protection against

mounting removal

RF antenna

routing hole

PANEL OVERVIEW

INTERIOR

Lithium-Ion

Battery*

The battery should NEVER be disconnected without following proper power-down procedures

Failure to comply may result in data corruption, panel failure, and a void of the manufacturer's warranty

*CAUTION

QOLSYS CONFIDENTIAL AND PROPRIETARY

PAGE OF7158

Legacy Security

RF Radio*

(319.5 MHz, 345 MHz or 433 MHz)

(For CE use SRF433 only. Not

approved for EN Grade 2 applications)

Barrel Jack

Power

PowerG Radio*

(Required for EN Grade 2 installations)

*NOTE: IQ4 NS will typically only have 1

RF daughter card pre-installed from the

factory. Depending on model/country

variant it will be either PowerG, 319.5

MHz, 345 MHz OR 433 MHz

INSTALLING

THE PANEL

INSTALLING THE PANEL

1. With a small phillips

screwdriver, undo the

locking screw from the back

of the panel and remove the

SmartMount backplate.

WALL MOUNT

Note: For UL/ULC Commercial Burg installations (UL2610/ULC-S304 Security

Level II compliant) and EN Grade 2 installations use only wall mount option

This product when installed as per these instructions does not present the risk of fire, electric shock, or injury to persons.

1. With a small phillips

screwdriver, screw in the

locking screw from the

bottom of the panel to

secure it to the wall.

*Screws shall be a minimum of 1” in length (25.4mm), size #6 (M3.5)

1. Mount the backplate to the

wall using flat head screws* and

appropriate wall anchors if

needed, ensuring it is level.

2. If using the model with the

legacy security radio, in the

provided hole on the right hand

side of the backplate drill a 1/4”

hole in the wall and feed the

white RF antenna into the wall.

3. A screw is required in break-

away wall tamper for UL 2610

and EN Grade 2 installations.

Connect the power supply to

the barrel jack on the back of

the panel.

1. Latch the top of the IQ4 NS

onto the SmartMount

backplate.

2. Swing the panel down

towards the backplate and

press firmly against the wall.

INSTALLING THE PANEL

1. With the included power

supply and cable, plug the

barrel connector into the

barrel jack as shown above.

Be sure the barrel connector

is properly seated.

1. Locate the SmartMount

table stand and insert the

hooks into the back of the

panel, then swing down

and press into place.

Be sure that the power

wire is routed out the

middle of the table stand

using the provided slot.

QOLSYS CONFIDENTIAL AND PROPRIETARY

PAGE OF10 158

TABLE STAND (OPTIONAL)

1. With a small phillips

screwdriver, screw in the

locking screw from the

bottom of the panel to

secure it to the table stand.

1. With a small phillips

screwdriver, undo the locking

screw from the back of the

panel, remove the SmartMount

backplate and discard.

Do not use for UL2610 or EN Grade 2 or equivalent installations

Autres manuels pour IQ4 NS

Table des matières

Autres manuels Johnson Controls Panneau de contrôle

Johnson Controls

Johnson Controls IFC-200 Manuel utilisateur

Johnson Controls

Johnson Controls FC-2000 Mode d’emploi

Johnson Controls

Johnson Controls Frick QUANTUM LX Manuel utilisateur

Johnson Controls

Johnson Controls FRICK QUANTUM HD Manuel

Johnson Controls

Johnson Controls FRICK QUANTUM LX AcuAir Mode d’emploi

Johnson Controls

Johnson Controls Bentel Security Absoluta 630 4.10 Guide de l'utilisateur

Johnson Controls

Johnson Controls IQ Panel Manuel utilisateur

Johnson Controls

Johnson Controls IFC-200 Guide de référence

Johnson Controls

Johnson Controls Frick QUANTUM Series Mode d’emploi

Johnson Controls

Johnson Controls Tyco PowerSeries Pro HS2TCHPRO Manuel utilisateur

Johnson Controls

Johnson Controls YORK OPTIVIEW CONTROL CENTER Manuel utilisateur

Johnson Controls

Johnson Controls Frick QUANTUM LX Mode d’emploi

Johnson Controls

Johnson Controls IFC-3030 Manuel du propriétaire

Johnson Controls

Johnson Controls Bentel Security tyco ABSOLUTA Plus Guide de l'utilisateur

Johnson Controls

Johnson Controls S1-TTSCC01 Guide de démarrage rapide

Johnson Controls

Johnson Controls Frick QUANTUM HD VILTER Manuel utilisateur

Johnson Controls

Johnson Controls S1-TTSCC01 Mode d’emploi

Johnson Controls

Johnson Controls FRICK QUANTUM HD Mode d’emploi

Johnson Controls

Johnson Controls T20 Manuel utilisateur

Johnson Controls

Johnson Controls CIW01 Manuel utilisateur

Johnson Controls

Johnson Controls FRICK QUANTUM LX AcuAir Manuel d'utilisation et d'entretien

Johnson Controls

Johnson Controls IFC-3030 Manuel utilisateur

Johnson Controls

Johnson Controls CIW01 Manuel utilisateur

Johnson Controls

Johnson Controls FC-2000 Mode d’emploi

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques