5. Connect the AC supply, the power indicator light of the receiver will light. Now you can
turn on the power button and the charging button of the digital monolight to charge it.
Press the (1)test button of transmitter to make sure that the digital monolight can
function normally.
6. If the digital monolight has a optical control switch, you should keep this switch off
to avoid interference by other light source.
7. Mount the transmitter to the hot shoe socket of camera, then tighten the nut until the
transmitter fixed well on the camera.
8. Now you can use the JJC Wireless AC Flash Trigger to produce the best lighting
to the object you shoot.
All specifications above are based on JJC’s testing standards.
Product specifications and external appearance are subject to change without notice.
About trademark
●JJC is a trademark of JJC Company
ONE YEAR UNCONDITIONAL GUARANTEE
If for any reason, this JJC product fails within ONE YEAR of the date of purchase, return
this
produc
t
to
your
JJC
dealer
or
c
ontact
servic[email protected] and it will be exchanged for youat no charge( not include shipping cost). JJC products are guaranteed for ONE FULL
YEAR against defects in workmanship and materials. If at any time after one year, your
JJC product fails under normal use, we invite you to return it to JJC for evaluation.
Shenzhen JinJiaCheng Photography Equipment Co., Ltd
Office TEL: +86 755 82359938/ 82369905/ 82146289
Office FAX: +86 755 82146183
Website: www.jjc.cc
Address: Main Building,Changfengyuan,Chunfeng Rd, Luohu District, Shenzhen, Guangdong, China
