Jetson E-PUNK Manuel utilisateur
1
E-PUNK
ELECTRIC SKATEBOARD
-MANUAL-
2
TABLE OF CONTENTS
A. Introduction 3
B. Included in the Box 4
C. Features and Specs 5
D. Charging the Battery 6
E. Operating the E-Punk 7
F. Safe Riding 7
G. Care and Maintenance 8
H. Safety Warnings 10
I. Warranty 12
J. Product Registration 14
3
Congratulations on your new Jetson E-Punk! The E-Punk is an innovative
and fun electric skateboard, ready to take on everyday use. Before your
rst ride, check whether the wheels are damaged, or parts are loose. If
there are any abnormalities, please contact Jetson Customer Support at
1-(888) 976-9904 or email us at [email protected].
This product manual can help you understand, use, and maintain your
E-Punk. In order to avoid danger caused by collisions, falls, and loss of
control, please use caution and learn how to ride the E-Punk safely.
Jetson and authorized dealers cannot be held liable for injury or
damage caused from riding the E-Punk. Users ride at their own risk.
The rider is responsible for consequences caused by violating warnings
or improper operations.
If you want to return this product for any reason, be sure to rst call or
email us before taking it back to the store so we can assist you.
INTRODUCTION
4
INCLUDED IN THE BOX
1. Direction Switch
2. Indicator Light
3. Remote Power Switch
4. Accelerate/ Brake Switch
1
2
4
3
5
FEATURES AND SPECS
MODEL: E-PUNK
WHEEL SIZE: 3.27”
MAX SPEED: 12 MPH
MAX RANGE: 7 MILES
BATTERY TYPE: LITHIUM ION
BATTERY CAPACITY: 36V
MOTOR TYPE: HUB
CLIMBING ANGLE: 15°
MOTOR: 500W
CHARGER: 110-240V
CHARGE TIME: 2-3 HOURS
PRODUCT WEIGHT: 9.75 LBS
WEIGHT LIMIT: 240 LBS
RECOMMENDED AGE: 13+
1. Deck
2. Power Button
3. Binding Button
4. Battery
5. Charging Port
6. USB Port
7. Motor
1
2
3
5
6
4
7
6
CHARGING THE BATTERY
Your E-Punk comes with a rechargeable lithium ion battery. Always use
the provided charger only. The Charging Port is located on the left side
of the battery directly opposite of the Power Button. Please remember
to cover the Charging Port when you are done charging the E-Punk.
Before your rst ride you must fully charge the E-Punk - charge for 4
hours for the rst 3 times you use it. For every ride after, charge your
E-Punk until it is fully charged, and NOT LONGER. Do not leave any
chargers plugged in overnight, or leave it plugged in past the charge
time.
1. Plug one end of the power cord into a grounded AC outlet and the
other into the E-Punk’s Charging Port. The red charging light on the
charger unit will turn on.
2. The red light will turn green once fully charged. Recharge the E-Punk
after each use.
(Please note: Always plug the charger into the wall rst before the
device. If the wall outlet doesn’t have power and you plug the charger
into the device rst, it will light green, even if the battery is not full. So
always plug into the wall rst to make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE
CHARGER:
CHARGING LIGHT RED: Battery is charging.
CHARGING LIGHT GREEN: Charging is complete.
Don’t use the E-Punk if the battery emits strange odors, overheats,
or begins leaking. If the battery does leak, do not touch any leaking
materials, as the battery contains dangerous substances. Do not open
the battery and do not insert anything into the battery.
Do not charge the battery if it has over-discharged. It should be
discarded for your safety. Do not turn on the E-Punk while it is charging.
7
TURNING ON AND OFF
Press the Power Button to turn the E-Punk on. To turn the E-Punk off,
press the Power Button again.
CONNECTING THE REMOTE CONTROL
To connect the Remote Control, rst ensure that the Remote Power
Switch is turned to Off, and that the E-Punk is turned off. Set the speed
switch, located in the Remote Control above the batteries, to slow. Set
the Direction Switch to Reverse.
Turn the E-Punk on, and press the Binding Button. Then, pull the
Accelerate/Brake Switch down to “Stop” and hold for 3 seconds. Turn
the Remote Power Switch to On and wait a few seconds. When the
Indicator Light ashes and the Power Button lights green, you have
successfully connected the Remote Control to the E-Punk.
CONTROLS
Push the Accelerate/ Brake Switch forward to accelerate, and push it
back to brake.
Reverse Mode - Push the Direction Switch to change driving direction.
Now, when you push the Accelerate/ Brake Switch forward it will
accelerate in reverse. Push the button back to brake.
PLEASE NOTE: Always accelerate and brake in small increments. Learn
to use the brake function before riding your E-Punk in public places.
Become comfortable with the power and speed of the brake before
attempting to ride for long periods of time.
OPERATING THE E-PUNK
SAFE RIDING
Helmet: Most serious injuries that occur while riding are head injuries.
This could be prevented by wearing a helmet.
Elbow and Knee Pads: For added protection, always wear elbow and
knee pads when riding your E-Punk, to prevent any serious injuries.
8
Get to know the E-Punk before riding it. Test your control over it. Make
your turns slowly and cautiously, and give yourself stopping distance. It
is recommended you practice your rst ride on the E-Punk in an open
space with no obstacles to disturb you.
RIDING TECHNIQUE
Foot Position – before riding put your foot as close as possible to the
front section of the E-Punk, and your other foot on the ground. Make
sure that your driving route is clear. To start riding, propel yourself
forward with your foot that is on the ground. Keep one foot behind the
other (it’s more comfortable to place one foot forward and the other
one turned 70-90°). It will help you gain more stability.
PLEASE NOTE: Riding, like most sports, involves risk of injury and
damage. By choosing to ride the E-Punk the responsibility and all
inherent risk is on you. It is crucial that you know, understand and act
according to safety rules.
Turns - The turns on the E-Punk are commanded by the direction you
lean on the Deck.
CARE AND MAINTENANCE
RIDING RANGE
The maximum range of the E-Punk is 7 miles. However, a lot of factors
will affect how far you can go per charge:
• Driving Surface: A smooth, at surface will increase driving
distance.
• Weight: More weight means less distance.
• Ambient Temperature: Please ride and store the E-Punk
under recommended temperature, which will increase its
longevity and driving distance.
• Maintenance: Timely battery charging and maintenance will
increase driving distance.
• Speed and Driving Style: Maintaining a moderate speed will
increase distance. Frequent starting and stopping, acceleration,
and decelertion will reduce it.
SPEED LIMIT
The top speed of the E-Punk is set to 12 mph.
9
WEIGHT LIMIT
The maximum load is 240 lbs. Going above the maximum weight limit
can cause injury or damage the E-Punk.
CLEANING THE E-PUNK
To clean the bottom of the Deck and the Wheels, carefully wipe with a
damp cloth, then dry with a dry cloth. Do not wipe down the top of the
Deck. Do not use water to clean the E-Punk, as the electrical and
electronic systems may get wet, resulting in personal injury or
malfunction of the E-Punk.
BATTERY
• Keep the E-Punk away from re and excessive heat.
• To avoid damage to the battery, never subject the E-Punk to intense
physical shock, severe vibration, or impact.
• Protect the E-Punk from water or moisture.
• Never disassemble the E-Punk or its battery.
• If there are any issues with the battery, please contact Jetson
Customer Support.
STORAGE
• If you plan on storing the E-Punk for a substantial period of time,
please make sure you fully charge the battery before storing. The
battery should be fully charged once a month after this.
• To protect against dust, cover the E-Punk.
• Store the E-Punk indoors, in a dry place and at a suitable
temperature.
• You should bring the E-Punk into a warm environment (above 50
degrees Fahrenheit) for charging.
• Do not leave the E-Punk plugged into the charger for long periods of
time.
10
SAFETY WARNINGS
Here are some useful tips to make sure you always have a safe ride:
• Children, the elderly, and pregnant women should not use the E-Punk.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
• Prior to each ride, inspect each part of the E-Punk to ensure it has
been maintained correctly and is functioning properly.
• Always give way to pedestrians.
• Always comply with local trafc laws and regulations. Remember, the
E-Punk is a motor vehicle, and is treated as such by local law
enforcement. You can and will be arrested for drunk driving. Many cities
have restrictions on where you can drive motor vehicles, as well as
additional restrictions on driving non-automobiles on streets and high-
ways.
• Be alert to things in front and far away from you.
• Make sure your feet are always placed securely on the deck.
•The E-Punk cannot be ridden by more than one person. Only one
person can ride at a time.
• When you ride the E-Punk along with other riders, always keep a safe
distance to avoid a collision.
• When turning, be sure to maintain your balance.
• Do not allow distractions when riding, such as answering the phone or
engaging in any other activities.
• Avoid riding in the rain or on smooth surfaces such as snow or ice.
• Do not ride on roads with obstacles (such as litter, small stones, etc.).
• Avoid riding in narrow spaces or on steep slopes.
• Avoid riding around ammable gas, steam, liquid, or dust that could
cause re.
• Never operate the product barefooted and keep shoelaces tied.
CALIFORNIA WARNING
This product contains chemicals, including lead, which are known to
the state of California to cause cancer, birth defects, and other medical
conditions.
Autres manuels pour E-PUNK
1
Table des matières
Autres manuels Jetson Autre
