Jet EQUIPMENT & TOOLS RM-22N Manuel utilisateur

OWNER'S MANUAL

RM-22N Rotary Machine

JET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:253-351-6000

A WMH Company Auburn, WA 98071-1349 Fax: 1-800-274-6840

www.jettools.com e-mail jet@jettools.com M-754022 10/01

Important Information

1-YEAR JET offers a one-year limited

LIMITED WARRANTY warranty on this product

REPLACEMENT PARTS

Replacement parts for this tool are available directly from JET Equipment & Tools.

To place an order, call 1-800-274-6848. Please have the following information ready:

1. Visa, MasterCard, or Discover Card number

2. Expiration date

3. Part number listed within this manual

4. Shipping address other than a Post Office box.

REPLACEMENT PART WARRANTY

JET Equipment & Tools makes every effort to assure that parts meet high quality and durability standards

and warrants to the original retail consumer/purchaser of our parts that each such part(s) to be free from

defects in materials and workmanship for a period of thirty (30) days from the date of purchase.

PROOF OF PURCHASE

Please retain your dated sales receipt as proof of purchase to validate the warranty period.

LIMITED TOOL AND EQUIPMENT WARRANTY

JET makes every effort to assure that its products meet high quality and durability standards and warrants to the

original retail consumer/purchaser of our products that each product be free from defects in materials and

workmanship as follows: 1 YEAR LIMITED WARRANTY ON THIS JET PRODUCT. Warranty does not apply to

defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities

or to a lack of maintenance. JET LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE FROM

THE DATE THE PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED HEREIN, ANY IMPLIED

WARRANTIES OR MECHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW

LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT

APPLY TO YOU. JET SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY

OR FOR INCIDENTAL, CONTINGENT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF

OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. To

take advantage of this warranty, the product or part must be returned for examination, postage prepaid, to an

authorized service station designated by our Auburn office. Proof of purchase date and an explanation of the

complaint must accompany the merchandise. If our inspection discloses a defect, JET will either repair or replace the

product or refund the purchase price, if we cannot readily and quickly provide a repair or replacement, if you are

willing to accept such refund. JET will return repaired product or replacement at JET’s expense, but if it is determined

there is no defect, or that the defect resulted from causes not within the scope of JET’s warranty, then the user must

bear the cost of storing and returning the product. This warranty gives you specific legal rights, and you have other

rights, which vary, from state to state.

JET Equipment & Tools •

••

•P.O. Box 1349, Auburn, WA 98071-1349 •

••

•(253) 351-6000



WARNING

For your own safety, read the owner’s manual before operating the rotary machine.

This rotary machine is designed and intended for use by properly trained and experienced

personnel only. If you are not familiar with the proper and safe operation of a rotary machine, do

not use until proper training and knowledge has been obtained.

1. KEEP GUARDS IN PLACE and in working order.

2. KEEP ALL BODY PARTS AWAY FROM MOVING PARTS. Avoid placing any part of your body

near belts, cutters, gears, etc.

3. DO NOT EXCEED 22 GAUGE RATED CAPACITY on this rotary machine.

4. KEEPTHEWORKAREACLEAN. Cluttered areas and work benches invite accidents.

5. KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work area.

6. MAKE THE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter keys.

7. DON’T FORCE THE MACHINE. It will do the job better and safer at the rate for which it was

designed.

8. USE THE RIGHT MACHINE. Don’t force a machine or attachment to do a job for which it was not

designed.

9. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other

jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective

hair covering to contain long hair.

10. ALWAYS USE SAFETY GLASSES. Also use face or dust masks if the cutting operation is dusty.

Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.

11. DON’T OVERREACH. Keep proper footing and balance at all times.

12. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for the best and safest performance.

Follow instructions for lubricating and changing accessories.

13. NEVER STAND ON A MACHINE. Serious injury could occur if the machine tipped.

14. CHECK DAMAGED PARTS. Before further use of the machine, a guard or other part that is

damaged should be carefully checked to determine that it will operate properly and perform its

intended function - check for alignment of moving parts, binding of moving parts, breakage of parts,

mounting, and any other conditions that may affect its operation. A guard or other part that is

damaged should be properly repaired or replaced.

15. SHEET METAL STOCK HAS SHARP EDGES. To prevent cuts, use caution when handling.

16. KEEP HANDS AND FINGERS clear of the area in front and rear of the rotary machine.

17. DO NOT USE THE MACHINE for any purpose other than for which it was designed

18. FAILURE TO COMPLY with all of these warnings may cause serious injury.

19. SOME DUST CREATED BY power sanding, sawing, grinding, drilling and other construction

activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead based paint

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically-treated lumber.

20. YOUR RISK FROM THOSE EXPOSURES varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved

safety equipment, such as those dust masks that are specifically designed to filter out microscopic

particles

21. DO NOT OPERATE TOOL while under the influence of drugs, alcohol or any medication.

Specifications: RM-22N

Stock Number................................................................................................................................ 754022

Capacity ..................................................................................................................................... 22 gauge

Distance Between Shaft Centers.............................................................................................................2”

Depth of Throat to Frame........................................................................................................................7”

Overall Dimensions (LxWxH)....................................................................................................18”x8”x16”

Uncrating and Clean-Up

1. Remove the RM-22N from the crate.

2. Carefully clean all rust protected surfaces

with a mild solvent or kerosene and a soft

rag. Do not use lacquer thinner, paint

thinner, or gasoline. These will damage

painted surfaces.

3. Lubricate all moving parts of the machine

with light grease or heavy oil.

4. Carefully move the machine to a well lighted

area and attach to a solid, level work bench.

5. Machine location must allow access to all

sides.

Setup for Rolls

The (#) in the text refers to the breakdown and

parts list.

1. Use the spanner wrench to remove the roll

nut #45 and install the different roll

combinations.

2. According to the material thickness lower

the upper shaft #11 by turning the handle

assembly #16.

3. Turn the adjusting nut #26 to align the upper

and lower rolls. To facilitate the movement

push in on the upper roll while turning the

adjusting nut. Tighten the set screw #57.

4. According to the size of the work piece

adjust the gauge stop #31 by turning knurled

nuts #33 to the proper position. You can

also adjust the gauge seat #30 by loosening

the set screw #32.

5. The work piece can now be inserted

between the rolls. Turn handle assembly

#16 until the rolls lightly press on the

material. Slowly turn handle #38 while

handle assembly #16 is rotated to give the

desired shape.

Lubrication

1. There are two grease fittings #24 that need

to be greased once a month.

2. The machine must be lubricated every day

of service with a few drops of oil. An oil

pinhole is located at the end of the lower

shaft #34, and upper shaft #11.

3. Every thirty days of operation grease the

gears by removing the gear cover #36.

Breakdown for the RM-22N Rotary Machine

Parts List for the RM-22N Rotary Machine

Index Part

No. No. Description Size Quantity

1..........RM22N-1 ..................... Body Assembly...................................... ...............................................1

2..........RM22N-2 ..................... Base Assembly...................................... ...............................................1

10........RM22N-10.................... Key........................................................6x6x20....................................4

11........RM22N-11.................... Upper Shaft........................................... ...............................................1

12........RM22N-12.................... Adjust Seat............................................ ...............................................1

13........RM22N-13.................... Spring.................................................... ...............................................1

14........RM22N-14.................... Screw.................................................... ...............................................1

16........RM22N-16.................... Handle Assembly................................... ...............................................1

17........RM22N-17.................... Collar..................................................... ...............................................1

18........RM22N-18.................... Spring Pin..............................................5x32........................................1

19........RM22N-19.................... Spring Collar.......................................... ...............................................1

20........RM22N-20.................... Spring.................................................... ...............................................1

21........RM22N-21.................... Collar..................................................... ...............................................1

22........RM22N-22.................... Set Screw..............................................M12x40...................................2

23........RM22N-23.................... Hex Nut.................................................M12.........................................2

24........RM22N-24.................... Oil Cup.................................................. ...............................................2

25........RM22N-25.................... Gear...................................................... ...............................................2

26........RM22N-26.................... Adjusting Nut......................................... ...............................................1

29........RM22N-29.................... Collar..................................................... ...............................................2

30........RM22N-30.................... Gauge Seat ........................................... ...............................................1

31........RM22N-31.................... Gauge Stop........................................... ...............................................2

32........RM22N-32.................... Set Screw.............................................. ...............................................1

33........RM22N-33.................... Knurled Nut ........................................... ...............................................4

34........RM22N-34.................... Lower Shaft........................................... ...............................................1

36........RM22N-36.................... Gear Cover............................................ ...............................................1

37........RM22N-37.................... Button Head Hex Screw......................... ...............................................2

38........RM22N-38.................... Handle................................................... ...............................................1

43........RM22N-43.................... Bushing................................................. ...............................................2

44........RM22N-44.................... Beading Roll (set).................................. ...............................................2

............RM22N-44-1 ................ Turning Roll (set)................................... ...............................................2

............RM22N-44-2 ................ Closing Roll (set) ................................... ...............................................2

............RM22N-44-3 ................ Jogging Roll (set)................................... ...............................................2

............RM22N-44-4 ................ Flanging Roll (set).................................. ...............................................2

............RM22N-44-5 ................ Crimping Roll (set)................................. ...............................................2

45........RM22N-45.................... Roll Nut ................................................. ...............................................2

49........RM22N-49.................... Base...................................................... ...............................................1

50........RM22N-50.................... Screw.................................................... ...............................................1

52........RM22N-52.................... Handle................................................... ...............................................1

53........RM22N-53.................... Socket Head Cap Screw........................M8x40.....................................1

54........RM22N-54.................... Socket Head Cap Screw........................M8x15.....................................1

55........RM22N-55.................... Pin.........................................................8x45........................................1

56........RM22N-56.................... Set Screw..............................................M8x16.....................................1

57........RM22N-57.................... Set Screw..............................................M6x6.......................................1

58........RM22N-58.................... C-Ring...................................................20 ...........................................1

59........RM22N-59.................... Pin.........................................................5x20........................................1

60........RM22N-60.................... Hex Nut.................................................M8 ..........................................1

............RM22N-61.................... Spanner Wrench (not shown)................. ...............................................1

............RM22N-ID.................... ID Label (not shown).............................. ...............................................1

............RM22N-W.................... Warning Label (not shown) .................... ...............................................1

............RM22N-J...................... JET Label (not shown)........................... ...............................................1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Jet EQUIPMENT & TOOLS Outils électriques

Jet EQUIPMENT & TOOLS

Jet EQUIPMENT & TOOLS JJ-6CSX Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel