Jenlis Weed Razer Pro Manuel utilisateur
Item 580113
Product Manual
WeedRa er
xpress
Product Contents................ 2
Assembly Instructions . . . . . . . . . . . . 3
Operating Instructions ............ 3
Blade Sharpening Instructions .....4-5
Safety Instructions............... 6
Replacement Parts .............. 7
Product Warranty................ 8
Table of Contents:
www.weedrazers.com
Important Information:
2
Please read these instructions thoroughly before use. Failure to follow instructions
may result in equipment damage or failure, losses, injury or death.
WARNING:
To reduce the risk of injury:
•The WeedRazer is designed for cutting submerged, partially emergent,
or emergent aquatic vegetation from underwater. Any other use is strictly
prohibited. Before using the WeedRazer, please read this manual carefully to
understand the proper use of the unit.
•The WeedRazer blade(s) are razor sharp. The blade covers should be on while
assembling the tool and when tool is not in use. Failing to comply can result in
severe lacerations, dismemberment, and even death.
SAFETY FIRST:
Instructions containing a warning within this manual are marked with a symbol.
Keep out of reach of children.
Do not use with children in immediate area.
IMPORTANT: Jenlis, Inc®is not responsible for equipment damage or failure,
losses, injury or death resulting from failure to follow safety
precautions, misuse or abuse of equipment.
PRODUCT CONTENTS:
H
A
B
C
PART QTY
A Weed Razer Pro 1
B Handle with Grip 1
C Handle Short Section 1
D Handle Connectors 2
PART QTY
E 25’ Rope 1
F 1.5" Bolt & T-Nut 1 ea.
G 1.5" Bolt, Nut, Washer 1 ea.
H Blade Sharpener 1
G
F
E
D
www.weedrazers.com 3
Notes:
Assembly & Instructions
The Weed Razer Pro comes fully assembled.
Simply snap the handles together with the
handle connectors.
Step 1
Press the spring-loaded buttons on one end of the
handle connector, slide it into the open end of the
handle, and turn it until the buttons snap into the
holes in the handle.
Step 2
Open the cutting blades wider to one of the four
blade positions based on the density of the aquatic
vegetation. A narrow blade position will work best
for dense vegetation. With the blade covers still
on, press the spring-loaded buttons on both sides
of the center strut and slide toward the handle. You
may need to carefully pull outward on a blade arm
to assist. Make sure the spring-loaded buttons
snap into the locked position before use.
Step 1
Throw the Weed Razer out and over area to be
cleared. If you are on a dock, tie the rope to a post
so you don’t throw too far.
Step 2
Let the Weed Razer sink.
Step 3
Pull back in using short, hard, jerking motions.
Repeat as many times as needed to clear your
weeds.
Operating Instructions
www.weedrazers.com
4
Notes:
Blade Sharpening Instructions
1
2
3
4
WARNING
Step 1
Always wear protective gloves when handling the
Weed Razer.
Step 2
Stand the assembled Weed Razer up and grip the
handle in one hand, or rest the handle of the Weed
Razer against a wall or building.
Step 3
Kneel or sit in front of the Weed Razer in a stable
position (Figure 1). Do not sharpen while standing
or leaning over the cutting edge.
Step 4
Grip the handle of the Sharpener (H) so that the
guard is between your hand and the blade surface.
Step 5 To remove burs from the blade surface,
use the inserts on either side of the tool (1).
Step 6
To sharpen BOTH SIDES of the blade at once, use
the carbide insert (3) with two pointed tips that
form a V. Run the sharpener down the cutting edge
in four to six strokes using less pressure as the
edge gets sharper.
Fig. 1
www.weedrazers.com 5
Notes:
Blade Sharpening Instructions
Step 7
To sharpen ONE SIDE of the blade only, use the
insert (2) with one pointed carbide tip and one
rounded metal guide. Press the inside edge of the
carbide insert against the edge of the blade you
want to sharpen. Run the carbide over the entire
edge four to six times with consistent pressure.
Repeat this process for the other side of the blade.
NOTE: We recommend using the process in
STEP 6 for greater consistency in sharpening.
Step 8
In the end of the sharpener’s handle (4), you will
find a screw-in felt pad and oil for lubricating
the blades. We encourage you to use the Weed
Razer Sharpening Tool for all of your sharpening
needs. When you are sharpening other tools that
may rust or corrode, add a few drops of oil to the
lubricating pad and apply to each blade after every
sharpening.
www.weedrazers.com
6
Notes:
Safety Instructions
1. Always wear cut resistant gloves when
handling the Weed Razer, especially during
and after removal of the blade covers.
2. The Weed Razer is to be operated by hand
only. Do not pull the Weed Razer behind a
boat or any other machine driven equipment.
Doing so will void the warranty and damage
your Weed Razer.
3. Do not use with children in immediate area.
4. Do not use the Weed Razer when humans
and/or animals are present within 100 feet
from the launch point.
5. Do not place or use near electrical wires or
cords.
6. Never touch the sharp edges of the blades
with bare hands at any time.
7. Leave blade covers on the cutting edges
when not in use.
8. Check all bolts, connections, and rope
before use.
9. Avoid areas with underwater structures.
10. When not in use, store in a safe location out
of the reach of children.
NOTE: Failing to comply can result in severe
lacerations, dismemberment, and even death.
Do not pull behind a boat
Do not pull behind a vehicle
or any mechanical device
WARNING
Do not use when humans or animals are within
100 feet from the launch point
www.weedrazers.com 7
Notes:
Replacement Parts
Replacement parts can be found online at www.weedrazers.com
V1
8View other great products on-line at www.weedrazers.com
ONE YEAR MANUFACTURER’S WARRANTY:
1-Year Manufacturer’s Warranty – Jenlis, Inc. warrants this product to be free from
defects in workmanship and materials, under normal, non-commercial use and conditions,
for a period of (1) one year from the original invoice date. Warranty Limitations – Damage
resulting from use in commercial environment, misuse, abuse, negligence, and/or accidents.
The manufacturer agrees, at its option during the warranty period, to repair any defect in
material or workmanship, or to furnish a repaired or refurbished product without charge. All
warranty claims must be sent to Jenlis, at the customer’s expense. Return shipping will be
pre-paid. All returns must be pre-approved. Please visit www.weedrazer.com/warranty for
an RMA number prior to returning product. Returns without RMA’s will be refused.
Item 580113
Manuel du Produit
WeedRa er
xpress
Table des matières:
Contenu du produit .............. 2
Instructions de montage .......... 3
Mode d’emploi.................. 3
Blade Sharpening Instructions .....4-5
Consignes de sécurité ............ 6
Pièces de rechange .............. 7
Garantie du produit .............. 8
www.weedrazers.com
Une information important
2
CONTENU DU PRODUIT:
H
A
B
C
G
F
E
D
Veuillez lire attentivement ces instructions avant utilisation. Le non-respect des
instructions peut entraîner des dommages ou des pannes de l’équipement, des
pertes, des blessures ou la mort.
ATTENTION:
Pour réduire le risque de blessure:
•Le Weed Razer est conçu pour couper la végétation aquatique submergée,
partiellement émergente ou émergente sous l’eau. Toute autre utilisation est
strictement interdite. Avant d’utiliser le Weed Razer, veuillez lire attentivement ce
manuel pour comprendre comment utiliser correctement l’appareil.
•Les lames de Weed Razer sont tranchantes comme des rasoirs. Les couvercles
de lame doivent être allumés lors de l’assemblage de l’outil et lorsque l’outil
n’est pas utilisé. Le non-respect de cette consigne peut entraîner de graves
lacérations, un démembrement et même la mort.
LA SÉCURITÉ D’ABORD:
Les instructions contenant un avertissement dans ce manuel sont signalées par un symbole.
Tenir hors de portée des enfants.
Ne pas utiliser avec des enfants à proximité immédiate.
IMPORTANT: Jenlis, Inc®n’est pas responsable des dommages ou pannes
d’équipement, des pertes, des blessures ou de la mort résultant du
non-respect des précautions de sécurité, de la mauvaise utilisation
ou de l’abus de l’équipement.
ARTICLE QTY
A Weed Razer Pro 1
B Poignée 1
CSection courte de la poignée 1
D Connecteurs de poignée 2
ARTICLE QTY
E 25’ Corde 1
F 1.5" Boulon et écrou en T 1 ea.
G1.5" Boulon, écrou, rondelle 1 ea.
H Aûteuse de lame 1
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Jenlis Coupeur
