Jcb JCB-IT30 Manuel utilisateur

JCB-IT30 & JCB-IT50

LED RECHARGEABLE

INDUSTRIAL TASK

LIGHTS

LED WORKLIGHTS

INSTRUCTION MANUAL

2JCB-IT30, JCB-IT50

Instruction Manual

INTRODUCTION

The LED Rechargeable Industrial Task Lights are available in 30W & 50W versions offering

up to 4000lm light output. The range is available with either an 11.1V or 14.8V battery,

delivering runtime of up to eight hours from a 4-6 hour charge time. The product is

supplied with a sturdy mounting bracket and has a 100% or 50% mode for brightness.

JCB-IT30 JCB-IT50

JCB-IT30, JCB-IT50

Instruction Manual

SPECIFICATION

JCB-IT30 JCB-IT50

Power Output 30W 50W

Lumen Output 2200lm 4000lm

Beam Angle 60º

IP Rating IP65

Charge Time 4-5 hours / battery 5-6 hours / battery

Run Time 2-2.5 Hours High

7-8 Hours Low

2-2.5 Hours High

7-8 Hours Low

Input Voltage 100-240V, 50Hz

Material Aluminium

LED 30W COB 50W COB

CRI 70Ra

Power Factor 0.9

Colour Temp 6500K

IK Rating IK09

Life Expectancy 20,000 Hours

Working Temp. -10ºC - 40ºC

Battery 1 x 11.1V 4000mAh 1 x 14.8V 5200mAh

PCB Protection Charging / Discharging Protection

Dimensions W250 x H158 x D95mm W302 x H197 x D100mm

Charger 12.6V, 1A, AC/DC 16.8V, 1A, AC/DC

Weight 1.5Kg 2.5Kg

Features • Carry handle

• Mounting bracket

• Sturdy base

4JCB-IT30, JCB-IT50

Instruction Manual

JCB-IT30

AVERAGE ILLUMINATION

PLANAR INTENSITY DISTRIBUTION CURVE

Bare Lamp Photometric Data Page 1 Of

Goniophotometer Test Report

Measured Para U: 0.0V I: 0.0mA P: 0.00W PF: 0.000

Lamp Name:

Shape Size:

Sur(m^2):

Lamp Type:

Lamp Spec:

Manufactory:

Weight(kg):

Lamp ID:

Protect Angle(Deg):

ataD cirtemotohPataD ecruoS thgiL

Model

Nominal P(w)

Rated Flux(lm)

Illuminant QTY

Peak Value(cd)

Dw Flux Rate(%) Down(C180-C360)

Efficiency(lm/w)

UP(C0-C180)

UP(C180-C360)

0.0

Planar Intensity Distribution Curve

2093.0

5.340.001

0.0

Position 180.0,7.0

Up Flux Rate(%) 0.0

C0 Plane beam angle(50%):66.9(DEG) C90 Plane beam angle(50%):67.2(DEG)

C0 Pla n e b e a m angle(50%)

C90 Pl a n e b e a m angle(50%)



0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

2,100

1,680

1,260

840

420

C Angle Range:0 - 180(Deg)

09 :)geD(lavretni C1 :)geD(lavretni amaG

Temperature(Deg): 27

Tester:

Test System: ZWL Goniophotometer System V3.0

Humidity(%): 50

Date: 2019-7-25

Gama Angle Range:-90 - 90(Deg)

:krameR70.01 :)m(ecnatsiD

JCB-IT30, JCB-IT50

Instruction Manual

JCB-IT50

PLANAR INTENSITY DISTRIBUTION CURVE

AVERAGE ILLUMINATION

Bare Lamp Photometric Data Page 1 Of

Goniophotometer Test Report

Measured Para U: 0.0V I: 0.0mA P: 0.00W PF: 0.000

Lamp Name:

Shape Size:

Sur(m^2):

Lamp Type:

Lamp Spec:

Manufactory:

Weight(kg):

Lamp ID:

Protect Angle(Deg):

ataD cirtemotohPataD ecruoS thgiL

Model

Nominal P(w)

Rated Flux(lm)

Illuminant QTY

Peak Value(cd)

Dw Flux Rate(%)Down(C180-C360)

Efficiency(lm/w)

UP(C0-C180)

UP(C180-C360)

0.0

Planar Intensity Distribution Curve

3457.1

9.140.001

0.0

Position180.0,7.0

Up Flux Rate(%)0.0

C0 Plane beam angle(50%):66.9(DEG) C90 Plane beam angle(50%):70.3(DEG)

C0 Plane beam ang l e ( 5 0 % )

C 9 0 P la n e beam angle(50%)



0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

3,460

2,768

2,076

1,384

692

C Angle Range:0 - 180(Deg)

54 :)geD(lavretni C1 :)geD(lavretni amaG

Temperature(Deg): 27

Tester:

Test System: ZWL Goniophotometer System V3.0

Humidity(%): 50

Date: 2019-7-25

Gama Angle Range:-90 - 90(Deg)

:krameR070.01 :)m(ecnatsiD

6JCB-IT30, JCB-IT50

Instruction Manual

SAFETY NOTICE

GENERAL

Ensure the worklight is correctly charged before initial use

DO NOT cover or block the lens during use

DO NOT shine the product directly into the eyes of people or animals

DO NOT allow children to use the worklight

DO NOT handle or move the worklight while it is being charged

DO NOT use the worklight if you suspect the battery or casing is damaged

DO NOT place the product in or near naked flames

DO NOT open the equipment or touch any of the internal parts

DO NOT open the battery pack

Ensure the worklight is unplugged and allow to cool before attempting cleaning & maintenance

BATTERY

WARNING! To reduce the risk of fire or burns:

DO NOT attempt to open, disassemble, modify or service the battery

DO NOT expose to temperatures below 10ºC or above 40ºC

DO NOT crush, puncture, short external contacts or dispose of in fire or water

DO NOT dispose of with regular waste - dispose of the old batteries in accordance with

local authority battery regulations

DO NOT cover the battery while charging

Ensure the charger is switched off and disconnected from the worklight before attempting

to open the lamp unit

If the electrolyte in the cells comes into contact with the skin, wash thoroughly with soap

and water

If the electrolyte in the cells comes into contact with the eyes, rinse thoroughly with cold

water and seek immediate medical attention

The worklight should be turned off during charging to prolong battery life

Only use the mains charger supplied

Prior to use carry out the necessary risk assessment considering the people who could be

at risk, the level of risk and the precautions required to control the risk.

JCB-IT30, JCB-IT50

Instruction Manual

SAFETY NOTICE

ELECTRICAL

WARNING! It is the user’s responsibility to read, understand and comply with the

following electrical instructions:

Ensure the risk of electrical shock is minimised by the installation of appropriate safety

devices

Inspect the charger plug, cable and connection for wear and damage to ensure the items

are safe before connecting to the mains power supply

DO NOT use if worn or damaged

Check cables are always protected against short circuit and overload

IMPORTANT! Check that the voltage marked on the charger plug is the same as the

power supply to be used

Uncoil the cable between charger and the worklight

DO NOT use any other type of charger with this product

DO NOT place the connector into any area of the worklight except the correct inlet

socket

DO NOT try to take the charger plug apart

DO NOT use the charger plug to charger or power any other electrical items

DO NOT wet the charger or use in wet or damp conditions (indoor use only)

8JCB-IT30, JCB-IT50

Instruction Manual

OPERATION

CHARGING WARNING! Ensure that you read and fully understand the safety

instruction before use

Charge the battery before use

IMPORTANT! Ensure the worklight is turned OFF while charging. Failure to do so will

damage the charger plug/vehicle plug

Connect the charging plug into the charging socket located on the rear of worklight

Connect the 230V charger to a power supply

Disconnect the charger from the worklight when it is fully charged and replace the dust cap

DO NOT shine the product directly into the eyes of people or animals

MAINTENANCE & STORAGE

When not in use store the product in a safe, clean, dry environment out of the reach of

children

Keep the worklight clean from dirt and grease using a damp cloth

DO NOT submerge in water

DO NOT clean the worklight with solvents

Check the product for damage before each use

JCB-IT30, JCB-IT50

Instruction Manual

GUARANTEE

This product is guaranteed against manufacturing defects for a period of 3 years from the

date of purchase.

Repair or replacement of products will be undertaken providing that:

• The product has been subject to fair wear and tear only

• The product has not been subject to accidental or cosmetic damage

• The product has not been misused and has been used only in accordance with the

instruction manual provided

• The product has not been subject to insufficient servicing and maintenance

• The product has not been subject to any abnormal environmental conditions or

inappropriate operating conditions

• Repairs have not been attempted by an unauthorised person and no modifications

have been made to the product

The guarantee excludes the following (where relevant):

• Components normally subject to wear and tear

• Batteries and chargers

Your statutory rights are not affected.

We reserve the right to alter specifications without prior notice.

WE WILL NOT BE LIABLE FOR ANY INJURIES OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THIS PRODUCT

10 JCB-IT30, JCB-IT50

Instruction Manual

NOTES

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels jcb Lampe de travail

jcb

jcb JCB-PT5S Manuel utilisateur

jcb

jcb JCB-WL-POCKET II Guide de planification

jcb

jcb JCB-FL20 Manuel utilisateur

jcb

jcb JCB-WL-POCKET Manuel utilisateur

jcb

jcb JCB-FLH40 Manuel utilisateur

jcb

jcb JCB-WL-TUFFCLAMP Guide de planification

jcb

jcb JCB-PL10 Manuel utilisateur

jcb

jcb JCB-WL-TUFFXONE Manuel utilisateur

jcb

jcb JCB-SL-KONNECT 6500 Guide de planification

jcb

jcb 21-18IL Guide de planification

jcb

jcb JCB-SL-TUFFDUAL Mode d’emploi

jcb

jcb JCB-WL-FLEXTRA Guide de planification

Manuels Lampe de travail populaires d'autres marques

ANSMANN

ANSMANN POWERLIGHT 5.1 Manuel utilisateur

RTRMAX

RTRMAX RTX1868 Manuel utilisateur

FeinTech

FeinTech LAL00220 Manuel utilisateur

Bunker Hill Security

Bunker Hill Security 64735 Manuel utilisateur

Goobay

Goobay 30450 Manuel utilisateur

REV Ritter

REV Ritter SPOT Manuel utilisateur

Ignition

Ignition Stagepix Line 100 IP Manuel utilisateur

SCANGRIP

SCANGRIP DUO CONNECT Manuel utilisateur

Bosch

Bosch GLI 18 V Manuel utilisateur

Bayco

Bayco SL-1514 Manuel utilisateur

EUFAB

EUFAB SMD LED 8+1 Manuel utilisateur

DeWalt

DeWalt DCL510 Manuel utilisateur

PowerSmith

PowerSmith PWLD080T Manuel utilisateur

MaxLite

MaxLite 73683 Manuel utilisateur

Heitronic

Heitronic Trend 27867 Manuel utilisateur

Monzana

Monzana Gore MZCL10 Manuel utilisateur

EINHELL

EINHELL TE-CL 18/2000 LiAC Manuel utilisateur

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur

jcb JCB-IT30 Manuel utilisateur

Manuels Lampe de travail populaires d'autres marques