Jbc HT470K Manuel utilisateur

HT470K

Heavy Duty Tweezers Kit

INSTRUCTION MANUAL

Stand for HT470

Heavy Duty Thermal Tweezers ..............1 unit

Ref. HDT-SE

Stand Cable 1m ......... 2 units

Ref. 0024227

Cable Flange .................1 unit

Ref. 0024028

Manual..............................1 unit

Ref: 0028447

Heavy Duty

Thermal Tweezers .................................... 1 unit

Re f. H T470 -A

The following items are included:

This manual corresponds to the following reference:

KHT470A

Packing List

Termal Tweezers

Re f. H T470 -A

C470 Cartridges

(not included)

Stand

Ref. HDT-SE

Control Unit

(not included)

Features

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

HT-SE

HT 420-A

HT-SE

HT 420-A

HT-SE

HT 420-A

HT-SE

HT 420-A

HT470-A Changing cartridges

2. Removing1. Unlocking

Place the cartridges in the extractor and pull

the tweezers to remove them.

Unlock the ﬁxing screws.

3. Inserting 4. Locking

Use the grooves to insert the cartridges as far

as the mark*.

Lock the ﬁxing screws.

*Important

It is essential to insert the cartridges as far as the mark for a proper connection.

Mark

HT-SE

HT 420-A

DR-SE

DS-SE

DS360-A

HT-SE

HT 420-A

Adjustable Stand

Cable Flange

Ref. 0024028

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Clean periodically

Maintenance

Before carrying out maintenance or storage, always

unplug the stand from the station and the tool.

- Use a damp cloth to clean the stand.

Alcohol can be used only when cleaning

the metal parts.

- Check periodically that the metal parts of

the tool/stand are clean so that the station

can check the tool’s status.

- Periodically check all cables and tube

connections.

- Replace any defective or damaged parts.

Use original JBC spare parts only.

- Repairs should only be performed by a

JBC authorized technical service.

Safety

- Do not use the stand for any other purpose than soldering or rework.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station

is turned off. Handle with care, including when adjusting the stand position.

- Avoid the contact of flux with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

This product should not be thrown in the garbage.

In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must

be collected and returned to an authorized recycling facility.

Warranty

JBC’s 2 year warranty covers this equipment against

all manufacturing defects, including the replacement

of defective parts and labour.

Warranty does not cover product wear or misuse.

In order for the warranty to be valid, equipment must

be returned, postage paid, to the dealer where it was

purchased.

Get 1 extra year JBC warranty by registering here:

https://www.jbctools.com/productregistration/

within 30 days of purchase.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Specifications

HT470K

Heavy Duty Tweezers Kit

Ref. KHT470A

Ref. HDT-SE

- Includes Sleep Mode, Hibernation Mode

Ref.: HT470 -A

- Cable Lenght: 1.3 m

- Total Net Weight: 1.67 kg / 3.68 lb

- Total Package Dimension / Weight: 440 x 210 x 220 / 2.51 kg

(L x H x W) 17.32 x 8.27 x 8.66 / 5.53 lb

Complies with CE standards

ESD safe

0 0 2 8 4 47-12 2 1

Table des matières

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

BGS technic

BGS technic 8578 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser

Goobay

Goobay 97790 Manuel utilisateur

jbc HT470K Manuel utilisateur

Manuels Outils populaires d'autres marques