Jbc JT-SD Manuel utilisateur

Stand for JT

Ref. JT-SD

www.jbctools.com

Packing List

The following items should be included:

Stand for JT ................................................ 1 unit

Ref. JT-SD

Manual ......................................................... 1 unit

Ref. 0016868

Stand for JT

Ref. JT-SD

Features

Adjust the tool holder angle to suit your work

position.

Removing the Nozzles

Used to remove the JT Nozzles.

Adjustable Stand

Power Socket

Fuse

USB connector

Robot RS232 connector

P-005 Pedal connection

Equipotential

connector

Auxiliar connector

Stand

Ref. JT-SD

2

www.jbctools.com

Maintenance

Before carrying out maintenance or storage, always unplug the stand from the station and the tool.

- Use a damp cloth to clean the stand. Alcohol can only be used to clean the metal parts.

- Periodically check that the metal parts of the tool and stand

are clean so that the station can detect the tool status.

- Periodically check all cables and tubes.

- Replace any defective or damaged parts.

- Only use original JBC spare parts.

- Repairs should only be performed by a

JBC authorized technical service.

Clean

periodically

Operating Modes

1. From the Tool Settings Menu, select the mode to activate the tool depending on the task.

2. The tool stops blowing when pressing the start/stop button.

If the stand is connected to the station and for safety it will also stop when returned to the stand.

Tool button Pedal*

Press the start/stop button to blow hot air. Press the Pedal to blow hot air and release

to stop.

*The P-005 Pedal is not supplied with this

station.

Press Press

www.jbctools.com

3

This product should not be thrown in the garbage.

In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life

must be collected and returned to an authorized recycling facility.

Manual in other languages available on our website

Warranty

JBC’s 2 year warranty covers this equipment

against all manufacturing defects, including the

replacement of defective parts and labour.

Warranty does not cover product wear or misuse.

In order for the warranty to be valid, equipment

must be returned, postage paid, to the dealer

where it was purchased.

- Weight: 1.24 kg (2.73 lb)

- Dimensions: 80 x 110 x 150 mm (3.15 x 4.33 x 5.91 in)

Complies with CE standards

ESD protected housing “skin effect”

Specifications

0016868 - 0417

www.jbctools.com

Table des matières

Manuels pistolet à souder populaires d'autres marques

Bakon

Bakon 3200 Manuel utilisateur

Proxxon

Proxxon Gaslotset MGS Manuel utilisateur

HAKO

HAKO FX-8804 Manuel utilisateur

SATA

SATA 02002A Manuel utilisateur

Velleman

Velleman HRJA151 Manuel utilisateur

Weller

Weller WSM 1 Manuel utilisateur

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instructions de montage

ersa

ersa i-CON 1V Manuel utilisateur

Hakko Electronics

Hakko Electronics FX-100 Manuel utilisateur

Weller

Weller WAD 101 Manuel utilisateur

Weller

Weller WXD 2 Manuel utilisateur

AlienTek

AlienTek T100 Manuel utilisateur

Atten

Atten ATETOOL AT-689A Manuel utilisateur

Surtek

Surtek 112554 Dimensions et guide d'installation

Parkside

Parkside PLBS 30 A1 Manuel utilisateur

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manuel utilisateur

Weller

Weller WX1 Manuel utilisateur

multicomp pro

multicomp pro MP740893 Manuel utilisateur