Jbc CD-BD Manuel utilisateur

www.jbctools.com

Compact Soldering Station

Ref. CD-BD

English 2

Page

Deutsch 29

Español 15

中文 43

www.jbctools.com

2 3

Packing List

The following items should be included:

Power Socket

Main switch

Fuse

Cable collector

Quick Tip Changer

Tip Cleaning System

Process

Control

Adjustable Stand:

Intelligent Heat

Management

Equipotential connection

USB-B connector

Features

Soft Thermal

Insulator Handle

Ref. T245-C

Power Cord ................................................. 1 unit

Ref. 0009417 (100V/120V)

0009401 (230V)

Manual .......................... 1 unit

Ref. 0014621

CD Control Unit ....................................... 1 unit

Ref. CD-1D (120V)

CD-2D (230V)

CD-9D (100V)

Brass Wool ................. 1 unit

Ref. CL6210

Cartridges ................................................. 2 units

Ref. C245903 (x1)

C245741 (x1)

Soft Thermal Insulator Handle ......... 1 unit

Ref. T245-C

Sponge ........................ 1 unit

Ref. S0354

Compact Soldering Station

Ref. CD-BD

ww w.j bct ool s.c om

www.jbctools.com

4 5

Adjustable stand

Cable collector

Adjust the tool stand to suit your work position.

Place the cable on the collector so that the working area is free of cable.

Tip Cleaner

Sponge

Ref. S0354

The least harmful cleaning method. Keep the sponge

damp with distilled water when working to avoid tip

wear.

Brass Wool

Ref. CL6210

Very effective cleaning method. Leaves a small layer

of solder on the tip preventing oxidation between

cleaning and rewetting.

Select the option that best suits your needs and improve the thermal transfer of the tip.

More options for the splashguard (not supplied):

Inox Wool

Ref. CL6205

Provides a superior

cleaning of the tip.

Metal Brush

Ref. CL6220

When used carefully,

it provides a more

thorough cleaning.

Splashguard

Wiper

Tapping:

Tap gently to remove excess solder.

Wiping:

Use the slots to remove remaining

particles.

Soft foam

Non-slip and soft touch

Blue grip to quickly distinguish

from other handles

Blue grip to quickly distinguish

from other handles

Foam

www.jbctools.com

6 7

For precision use

Works with C210 Cartridge range

For general use

Works with C245 Cartridge range

Compatible Handles

For greater demands

Important: Only work with C245 cartridges when used with a CD station.

Precision Purpose Handle

Ref. T210-A

Blue Precision Handle

Ref. T210-PA

General Purpose Handle

Ref. T245-A

Blue General Purpose Handle

Ref. T245-PA

Non-slip Handle

Ref. T245-B

For intensive soldering jobs requiring continued high thermal power. They feature good thermal

insulation and a screw which fixes the cartridge and prevents its rotation.

General Purpose HD Handle General Purpose HD Handle with 3m cable

Ref. T470-A Ref. T470-SA

Tri-lobed Handle

Ref. T470-ZA

For better handling of the tool.

Thermal Insulator HD Handle Thermal Insulator HD Handle with 3m cable

Ref. T470-FA Ref. T470-MA

Note: All models are supplied with a 1.5m cable except those speciﬁed with 3m.

Soft Thermal Insulator Handle

Ref. T245-C

Note: All models are supplied with a 1.5m cable.

ø 1

ø 1,5

ø 3,5

www.jbctools.com

8 9

USB Connector

Download the latest software from our website to improve your soldering station.

JBC Updater

www.jbctools.com/software.html

Update the station software via USB connection:

Cable USB AB

JBC

Manager

JBC

Updater

JBC Manager

www.jbctools.com/manager.html

Manage and monitor as many stations as your PC can handle by using the JBC Manager. You can

export data to another PC.

Create graphs of the

soldering process in real

time with power and

temperature data.

Manager Settings

Change settings for a

group of JBC stations at

the same time.

any JBC

station

USB

Hub

Cable

USB AB

Quick Tip Changer

Round Chisel Round

bent

Bevel Special models

Compatible cartridges

The CD stations work with C245 cartridges and T245/T470 handpieces or C210 cartridges with

T210 handpieces. Find the model that best suits your soldering needs in www.jbctools.com

Save time and change cartridges safely without switching the station off.

1. Removing 2. Inserting 3. Fixing

Place the handpiece in the

extractor and pull to

remove the cartridge.

Place the handpiece on top

of the new cartridge and

press down slightly.

Use the holes for fixing the

cartridge* as follows:

A. For straight C210.

B. For curved C210.

C. For C245.

*Important

It is essential to insert the cartridges as far as the mark for a proper connection.

Mark

Main menu

4 Counters

Program version

Exit

1 Reset settings

Station settings

Tool settings

Hibernation hours 0

No tool hours 0

6 Sleep cycles

Tool 245

Back

Fix one temp -----

Temp levels set OFF

Sleep delay 0 min

5 Beep ON

Change PIN

1 Temp unit

Celsius

Maximum temp 400

Minimum temp 200

Help text OFF

Plugged hours 0

Working hours 0

Sleep hours 0

Counters

Tool settings

Station settings

Selected temp.

350

Power 5%

Fixed temp.

350

Levels ºC

270 350 400

350

-10

Sleep temp 150

Hibernationdelay 10 min

Temp adjust + O

Tool 245

Back

Sleep temp 150

Sleep

Tool in the stand, no heat

Hibernation

Power 5%

350

Selected temp

350

150 20

www.jbctools.com

10 11

Menu Screen

Original PIN: 0105

The work screen provides

useful information of tool

status in real time.

Work Screen

Process ControlOperation

The JBC Exclusive Heating System

This revolutionary technology is able to recover tip temperature extremely quickly.

This allows the user to work at a lower temperature.

As a result, tip life increases by 5.

· Change temperature

(from 90 to 450ºC)

· Select temperature levels

· Fix one temperature

· Change Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

· Change Hibernation delay

(from 0 to 35 min)

Long time in

the stand

1. Work

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

2. Sleep

When the tool is in the stand,

the temperature falls to

150ºC / 302ºF (preset sleep

temperature).

3. Hibernation

After longer periods of

inactivity (pre-set to 30 min.),

the power is cut off and the

tool cools down to room

temperature.

Displays a specific fixed temp.

Shown when you have

selected temp. levels. The

values must be adjusted

according to the work needs.

“Temp. Adjust” parameter.

It provides a more precise

adjustment between the

selected temp and the

actual one.

www.jbctools.com

12 13

Before carrying out maintenance or storage, always allow the equipment to cool.

- Clean the station screen with a glass cleaner

or a damp cloth. Clean

periodically

- Use a damp cloth to clean the casing and

the tool. Alcohol can only be used to clean

the metal parts.

- Periodically check that the metal parts of

the tool and stand are clean so that the

station can detect the tool status.

- Maintain tip surface clean and tinned prior

to storage in order to avoid tip oxidation.

Rusty and dirty surfaces reduce heat

transfer to the solder joint.

- Periodically check all cables and tubes.

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station is

turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

Maintenance Safety

1. Remove the fuse by pulling off the black

cap. If necessary use a tool to lever it off.

2. Press the new fuse into the holder and

replace it in the station.

- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

www.jbctools.com

14 15

Specifications

CD-1BD 120V 50/60Hz. Input fuse: 2A. Output: 23,5V. Control Unit model: CD-1D

CD-2BD 230V 50/60Hz. Input fuse: 1A. Output: 23,5V. Control Unit model: CD-2D

CD-9BD 100V 50/60Hz. Input fuse: 2A. Output: 23,5V. Control Unit model: CD-9D

- Weight: 2.6 Kg (5.7 lb)

- Dimensions: 150 x 175 x 145 mm

- Output Peak Power CD-BD: 130W

- Temperature Range: 90-450°C (190°-840°F) (±5%)

- Idle Temp. Stability (still air): ±1.5 ºC / ±3 ºF

- Tip to ground resistance: <2 ohms

- Tip to ground voltage: <2mV RMS

- Ambient operating temp: 10-40 ºC / 50-104 ºF

- USB connector station-PC

Complies with CE standards

ESD protected housing “skin effect”

Estación soldadora

Compact

Ref. CD-BD

www.jbctools.com

16 17

Compact Soldering Station

Ref. CD-BD

ww w.j bct ool s.c om

Power Cord

Cable de Red ......................................... 1 unidad

Ref. 0009417 (100V/120V)

0009401 (230V)

Composición

Los siguientes artículos deben estar incluidos:

CD Control Unit

Unidad de Control CD ........................ 1 unidad

Ref. CD-1D (120V)

CD-2D (230V)

CD-9D (100V)

Brass Wool

Lana de latón ........ 1 unidad

Ref. CL6210

Cartridges

Cartuchos .......................................... 2 unidades

Ref. C245903 (x1)

C245741 (x1)

Sponge

Esponja ................... 1 unidad

Ref. S0354

Entrada de Red

Interruptor de red

Fusible

Conexión Equipotencial

Conector USB-B

Características

Manual .................... 1 unidad

Ref. 0014621

Soft Thermal

Insulator Handle

Mango suave y con

aislamiento térmico

Ref. T245-C

Soft Thermal Insulator Handle

Mango suave y con aislamiento térmico.. 1 u.

Ref. T245-C

Recogecable

Cambio rápido

de cartucho

Sistema de limpieza

de puntas

Control del

proceso

Soporte Ajustable:

Gestión inteligente

del calor

www.jbctools.com

18 19

Golpeteo:

Sacuda ligeramente los cartuchos

para soltar el exceso de estaño.

Soporte Ajustable

Recogecable

Ajuste el soporte de la herramienta para adaptarlo a su posición de trabajo.

Limpiador de puntas

Sponge

Esponja

Ref. S0354

El método de limpieza menos dañino. Mantenga la

esponja húmeda con agua destilada cuando trabaje

para evitar el desgaste de la punta.

Brass Wool

Lana de latón

Ref. CL6210

Método muy eficaz. Deja una pequeña capa de

estaño en la punta para prevenir la oxidación entre la

limpieza y la rehumectación.

Elija la opción que se ajuste mejor a sus necesidades y mejore la transferencia térmica de la punta.

Más opciones para la cúpula anti-salpicaduras (no incluidas):

Inox Wool

Lana inoxidable

Ref. CL6205

Proporciona una limpieza

superior de la punta.

Metal Brush

Cepillo de metal

Ref. CL6220

Si se usa con cuidado,

proporciona una limpieza

más profunda.

Protector anti-salpicaduras

Limpiador

Coloque el cable en el recogedor para mantener ordenada su área de trabajo.

Limpieza:

Utilice las ranuras para eliminar las

partículas adheridas a la punta.

Autres manuels pour CD-BD

Table des matières

Langues :

Manuels pistolet à souder populaires d'autres marques

Bakon

Bakon 3200 Manuel utilisateur

Proxxon

Proxxon Gaslotset MGS Manuel utilisateur

HAKO

HAKO FX-8804 Manuel utilisateur

SATA

SATA 02002A Manuel utilisateur

Velleman

Velleman HRJA151 Manuel utilisateur

Weller

Weller WSM 1 Manuel utilisateur

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instructions de montage

ersa

ersa i-CON 1V Manuel utilisateur

Hakko Electronics

Hakko Electronics FX-100 Manuel utilisateur

Weller

Weller WAD 101 Manuel utilisateur

Weller

Weller WXD 2 Manuel utilisateur

AlienTek

AlienTek T100 Manuel utilisateur

Atten

Atten ATETOOL AT-689A Manuel utilisateur

Surtek

Surtek 112554 Dimensions et guide d'installation

Parkside

Parkside PLBS 30 A1 Manuel utilisateur

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manuel utilisateur

Weller

Weller WX1 Manuel utilisateur

multicomp pro

multicomp pro MP740893 Manuel utilisateur

jbc CD-BD Manuel utilisateur

Manuels pistolet à souder populaires d'autres marques