2
•When cursor indicate SETUP, press [SET] key will go
into SETUP program mode
•Rotate [SET] key to select Input Device?
and press [SET] key go into Input Device function.
•Rotate [SET] key to select Input 3?
and press [SET] key go into setup input device 3 function.
•Rotate [SET] key to select Device Type?
and press [SET] key go into Input Device Type function.
•Rotate [SET] key to select Remote Key type,
Note: If system generate an have error tone , please go into
Input Device/Enable, set OFF
•Press [SET] key to save it, or press [RESET] key to cancel,
it will exit and go to “Learn In_Device”.
•Press [SET] key go into Learning… status.
Trigger the wireless device within 10 seconds ensuring it is kept
at least 0.5m away from the Controller. To trigger:
•Press and release the disarm button once.
•Learn OK, Controller will generate an have OK tone,
it will exit and go into Enable function
•LCD will display current enable status..
•Rotate [SET] key to select ON,and press [SET] key to accept,
it will enable Input Device 3 work
•System generate an have OK tone, it will exit and go
into next Input Device
•Press [RESET] key multiple, controller will return to Day Mode
Note:Set Enable Work/ OFF, If the wireless device have been accepted into the system, It will clear the input device.
HEALTH WARNING:
The Wireless Remote Control Keyfob is fitted with a Coin Cell (CR2032) battery. When removing this cell, do not place in your mouth as
this could impair your health. Also please ensure young children are kept out of reach from this battery to prevent them from swallowing it
and choking.
Disposal and Recycling
Batteries and waste electrical products should not be disposed of with household waste. Please recycle where these facilities exist. Check
with your local authority or retailer for recycling advice.
INPUT DEVICE
Input 3?
Input Device
Device Type?
SETUP MENU
Input Device?
Device Type
Remote Key?
Input Device
Learn In_Device?
Learn In_Device
Learning…
Input Device
Enable?
SETUP MENU
Setup System?
INPUT DEVICE
Input 4?
Enable Work
OFF?
Enable Work
ON?
08:00 01- Jan
DAY
