Janam XP20 Manuel utilisateur
XP Series
Quick Start Guide
™
Janam Technologies
The contents of this guide are confidential.
Copyright 2006 Janam Technologies LLC. All rights reserved.
XP Series Quick Start Guide
Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide. Janam
Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through the use of
this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by deletion of data as
a result of malfunction, dead battery or repairs. Be sure to make backup copies of all important data on other media
to protect against data loss.
Important: Please read the End User Software License Agreement with this product before using the accompanying
software program(s). Using any part of the software indicates that you accept the terms of the End User Software
License Agreement.
XP Series, XP20, XP30, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and
brand names may be trademarks or registered trademarks of their respective owners.
XP Series Quick Start Guide
To help you get started with your XP Series mobile computer, this guide features:
-Hardware Overview
-Installing and Charging the Battery
-Getting Started
For additional product details visit www.janam.com
For Palm OS® software updates and information visit www.palmsource.com
Content and Additional Resources
Janam Technologies
Hardware Overview
1. Power
2. Indicator LED
3. LCD
4. Connector
5. Scan Trigger
6. Right Trigger
7. Left Trigger
8. Navigation
9. Home
10. Enter
11. Brightness/Contrast
12. Programmable
13. Function
14. Backspace
15. Alpha/Numeric Shift
16. Space
17. Shift
2
3
4
5
67
8
9
8
9
10
6
4
7
10
11
12
11
2
3
PDA Keypad Numeric Keypad
13
12 14
16
17
15
12
XP Series Quick Start Guide
Hardware Overview
1. Battery Door
2. Battery Screw
3. Reset
4. Microphone (XP30 Series)
5a. Speaker (XP30 Series)
5b. Buzzer (XP20 Series)
6. IrDA Window
7. Stylus
8. Stylus Slot
9. Lanyard Connector
7
4
2
3
5a/5b6
8
9
1
Battery Compartment
Janam Technologies
Installing and Charging the Battery
A. INSTALLING THE BATTERY
1. To access the battery compartment, turn the battery-screw counterclockwise to open the latch and
remove battery cover.
2. Position the battery-lift strap, place the Lithium-ion battery and snap into place.
3. Replace the battery cover* by positioning the top prongs first and sliding cover into place.
Tighten battery-screw by turning clockwise.
B. CHARGING THE BATTERY
Important Note: The main battery charges the backup battery in the XP Series unit. Once the main battery is fully charged, do not re-
move it from the unit for 24 hours. During this period the device cannot maintain any user data if the battery is removed.
To charge the battery using the USB Synching/Charging Cable:
a. Connect the power supply to the USB Synching/Charging cable.
b. Connect snap-on end of USB Synching/Charging cable to bottom of device making sure the word “TOP” on the
connector faces front.
c. Insert appropriate AC plug and plug in the power supply.
To charge the battery using the Single-Slot or Four-Slot Cradle:
a. Connect the power supply to the cradle.
b. Connect the line cord to the power supply.
c. Insert appropriate AC plug and plug in the power supply.
d. Place the XP device in cradle. The LED will illuminate to confirm connection (orange indicates charging, green
indicates fully charged and red indicates fault).
e. The battery is fully charged in approximately 2 hours.
f. Charge a spare battery by placing the battery in the spare battery well with label up and connectors lined up.
XP Series Quick Start Guide
Getting Started
A. CALIBRATING THE SCREEN
The first time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen
instructions using the stylus to tap the exact center of each target
Note - If your XP Series device came pre-loaded with a custom software application, the Welcome Utility may not appear.
B. BRIGHTNESS/CONTRAST/BACKLIGHT ADJUSTMENT
Control PDA Keypad Numeric Keypad
Brightness
(XP30 Series)
Press the brightness/contrast control on the
keypad. Use stylus to adjust brightness by
sliding the on-screen control left/right.
Press and hold the yellow function key and
press one of the four navigation keys. Use
stylus to adjust brightness by sliding the on-
screen control left/right.
Contrast
(XP20 Series)
Press the brightness/contrast control on the
keypad. Use stylus to adjust brightness by
sliding the on-screen control left/right.
Press and hold the yellow function key.
Use the up/down navigation keys to adjust
contrast.
Backlight On/Off Press and hold the power button to toggle
backlight on/off.
Press and hold the power button to toggle
backlight on/off.
Autres manuels pour XP20
4
Table des matières
Autres manuels Janam portable
Janam
Janam XT2WB Manuel utilisateur
Janam
Janam XT2 Manuel utilisateur
Janam
Janam XT3 Series Manuel utilisateur
Janam
Janam XT100 Manuel utilisateur
Janam
Janam XM66 Manuel utilisateur
Janam
Janam XG100WM Series Manuel utilisateur
Janam
Janam XM series Manuel utilisateur
Janam
Janam XM75WA Manuel utilisateur
Janam
Janam XG100 Manuel utilisateur
Janam
Janam XG200 Series Manuel utilisateur
Janam
Janam XG3 Series Manuel utilisateur
Janam
Janam XM60 Manuel utilisateur
Janam
Janam AI4100 Manuel utilisateur
Janam
Janam XM60+ Manuel utilisateur
Janam
Janam XM5 Manuel utilisateur
Janam
Janam XG100CE Series Manuel utilisateur
Janam
Janam XG3 Series Manuel utilisateur
Janam
Janam XT2+ Manuel utilisateur
Janam
Janam XG3 Series Manuel utilisateur
Janam
Janam XP series Manuel utilisateur
