Jacto ARBUS 500 Manuel utilisateur

TECHNICAL NOTICE

For more information, consult Technical Assistance

Toll free: 1-800-522-8610

E-mail: [email protected]

Home page: www.jacto.com

Tower Kit is available for Jacto Arbus 500 and Arbus 200 airblast sprayers.

Follow instructions below for assembly:

ARBUS 500 / ARBUS 200

TOWER KIT

CTI - ??/??/2012

IMP-????

1-Locate left and right deflectors on

the rear of the machine (A).

2-Loosen mounting bolts (B) and

remove both right and left deflectors.

ATTENTION!

With sprayer hitched to the tractor, park on a rm and level

ground free of obstacles. Apply the tractor parking brake.

Wash the machine before assembling Tower Kit.

TECHNICAL NOTICE

3-Pull the clip and remove the quick

fitting clamp (C). Then, disconnect

the hose from left and right branches.

4-Loosen nozzle branch mounting

bolts (D) and remove both right and

left branches. D

branch

hose

5-Use a screwdriver (E) to loosen

the hose clamp and disconnect the

branch hose.

nozzle

branch

branch hose

TECHNICAL NOTICE

7-Loosen and remove mounting bolts

for spacer bushings (H).

guard screens

8-Remove spacer bushings (I) and

guard screens from both left and

right sides.

NOTE:

The spacer bushings (I)

will be replaced by new

ones included with the

Tower Kit. Keep the remo-

ved spacer bushings (I)

and the deflector upper

fastening (G) in an appro-

priate place for future use

without the Tower Kit.

6-To remove the fan guard screen,

loosen the mounting bolt for the

spacer bushing (F) and remove the

deflector upper fastener (G). Next,

tighten the mounting bolt (F) for the

spacer bushing.

TECHNICAL NOTICE

9-Equipment without spacer bushin-

gs and guard screen ready for Tower

Kit installation.

1-Connect the branch hose to the

Tower Kit (J) and tighten the clamp

with a screwdriver (L).

Tower Kit

2-Tower Kit with branch hose con-

nected.

> Tower Kit assembly

TECHNICAL NOTICE

3-The items shown are included with

the Tower Kit and are used in the

assembly.

4-Remove nozzle holders from left

and right branches.

5-Install the nozzle holders with seal

(1) on the Tower Kit nozzle branch (2

and 3). By, placing the nozzle holder

seal (1) in the hole of the Tower Kit

nozzle branch and install the nozzle-

-holder (3). 1

Kit Tower

nozzle holder

TECHNICAL NOTICE

6-Use the spacer bushings included

in the kit and install on the Tower Kit

as shown in the picture.

7-Install the Tower Kit to the fan hou-

sing. Align the spacer bushings with

the holes on the fan housing.

TECHNICAL NOTICE

8-With Tower Kit installed, insert

mounting bolts into spacer bushings

(M) and tighten.

9-With both sides of Tower Kit instal-

led, locate the two mounting holes

(N and O). Insert mounting bolts and

tighten.

TECHNICAL NOTICE

10-Connect the branch hose to the

quick fitting (right and left sides) and

attach the quick fitting clamp (P).

11-Machine with Tower Kit installed.

Arbus 200

Arbus 500

Ce manuel convient aux modèles suivants

Autres manuels Jacto Pistolet à peinture

Jacto

Jacto PJ Manuel utilisateur

Jacto

Jacto HD-400U Manuel utilisateur

Jacto

Jacto XP312 Manuel utilisateur

Jacto

Jacto ARBUS 270 Manuel utilisateur

Jacto

Jacto J600 Manuel utilisateur

Jacto

Jacto X-15 Manuel utilisateur

Jacto

Jacto SP 312 Manuel utilisateur

Jacto

Jacto GB-18 Manuel utilisateur

Jacto

Jacto PJ-16U Manuel utilisateur

Jacto

Jacto PJH Manuel utilisateur

Jacto

Jacto pjm-20 Manuel utilisateur

Jacto

Jacto PJB Manuel utilisateur

Jacto

Jacto XP12 Manuel utilisateur

Jacto

Jacto PJ-16 Manuel utilisateur

Jacto

Jacto hh-5 Manuel utilisateur

Jacto

Jacto DJB-20 Manuel utilisateur

Jacto

Jacto ARBUS 1000 Manuel utilisateur

Jacto

Jacto CD 400 Manuel utilisateur

Jacto

Jacto HD-400 Manuel utilisateur

Jacto

Jacto PJB-20/16 Manuel utilisateur

Jacto

Jacto PJBc Series Manuel utilisateur

Jacto

Jacto PJH Manuel utilisateur

Jacto

Jacto HD Series Manuel utilisateur

Jacto

Jacto pjm-25 Manuel utilisateur

Manuels Pistolet à peinture populaires d'autres marques

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Manuel utilisateur

Graco

Graco 246737 Manuel d'utilisation et d'entretien

Binks

Binks SV100 Manuel utilisateur

Fimco

Fimco LG-4-3-1 Manuel utilisateur

AG SPRAY

AG SPRAY FS-ATV-25BL Manuel utilisateur

Nordson

Nordson MicroMax 2 Manuel utilisateur

Bonide

Bonide 051 Manuel d'utilisation

zogics

zogics Z-DAS Manuel utilisateur

KISANKRAFT

KISANKRAFT KK-KBS-165 Manuel utilisateur

Matrix

Matrix SG 650 Manuel utilisateur

Anest Iwata

Anest Iwata SGA-3 Guide de démarrage rapide

paasche

paasche VV Fiche technique

Carlisle

Carlisle DeVilbiss JGA-510 Manuel utilisateur

Gardena

Gardena 11120 Manuel utilisateur

Conrad

Conrad Hobby Airbrush K3 Manuel utilisateur

wiwa

wiwa 14025 R/F Manuel utilisateur

Graco

Graco EM 390 Manuel d'utilisation

DeVilbiss

DeVilbiss LUNA2i Manuel utilisateur