Jackson Dishmachine Stand M24STD-6 Manuel utilisateur

Jackson MSC, INC.

P.O. BOX 1060

HWY. 25E

BARBOURVILLE, KY. 40906

FAX (606) 523-9196

PHONE (606) 523-9795

www.jacksonmsc.com

Installation Instructions

FOR JACKSON MODEL:

M24STD-6

Dishmachine Stand

August 7, 2006

P/N 07610-003-26-13 Rev. A

M24STD-6 INSTALLATION INSTRUCTIONS

Installation Instructions 07610-003-26-13

Issued: 08-10-2006 Revised: N/A

Tools Required:

• Standard Allen wrench set

• Tube of food-grade silicon

• Silicon gun

• Rag

Time Requirements:

It is expected that it will take 30 minutes to

install the M24STD-6 dishmachine stand.

Notes:

• Ensure that the dishmachine stand is

level prior to placing the dishmachine

on the stand.

• Never attempt to lift a dishwasher on

your own. Always use other personnel

to help or the appropriate lifting devices

to prevent accident and injury.

Steps:

• Inspect the assembly to ensure that

there has been no freight damage. If

there is any damage, contact the

freight carrier immediately.

• Your package should contain the fol-

lowing:

• Stand platform weldment

• (4) legs

• Instructions

• If any of these items are missing, im-

mediately contact Jackson Technical

Service at 1-888-800-5672.

• Remove the items from the box.

• Ensure that the set screws are located

within the leg sockets. If they are miss-

ing, immediately contact Jackson

Technical Service (See Figure 1).

• Verify that the foot of each leg can be

turned; this is how the stand will be ad-

justed in order to level it. Please note

that when assembled, there should be

a minimum of 6” (152.4mm) of space

between the bottom of the stand and

the finished floor.

• Place the legs fully into the leg sockets

of the platform and tighten down the

set screws to secure them in place.

(See Figure 2).

• Once all of the legs are tightly in place,

flip the dishmachine stand over and set

it down on all four legs. Ensure that the

legs are stable.

• If stable, take a small amount of silicon

and apply it to the set screw to cover

any exposed threads and to fill in the

hole for the Allen wrench. (See Figure

3). Note: do not use excessive

amounts of silicon; only enough to

complete the task.

Figure 1—Leg socket showing set screw

Figure 2—Tightening the legs

M24STD-6 INSTALLATION INSTRUCTIONS

Installation Instructions 07610-003-26-13

Issued: 08-10-2006 Revised: N/A

•To mount the undercounter dishmachine,

remove the feet from the frame bottom by un-

screwing them.

•Set the unit on top of the stand (minus the

feet) on the platform, lining up the holes in the

frame to the corresponding holes in the plat-

form.

•Secure the unit to the platform by rein-

serting and tightening the feet.

•Verify that the unit is level prior to making

any utility connections. If the unit is not level,

it may operate inefficiently.

After Maintenance Actions:

• Wipe down the stand to remove any

excess silicon.

• Once the dishmachine is fully hooked

up and operational (per the manufac-

turer’s instructions), operate the ma-

chine and observe it to ensure that

there is no excessive vibration or any

other source of concern.

Preventative Maintenance:

• Keep the area under the platform free

of dirt, soil and debris.

• Clean the stand regularly with a wet

towel to prevent the build-up of residue

and soil.

Figure 3—Applying silicon

Table des matières

Autres manuels Jackson Lave-vaisselle

Jackson

Jackson DELTA 115 Guide de configuration

Jackson

Jackson AJ-44TE Manuel utilisateur

Jackson

Jackson Glasswashers Delta 5 Manuel utilisateur

Jackson

Jackson 200 3 10 06401-003-12-94 Caractéristiques techniques

Jackson

Jackson Hot Water Sanitizing Undercounter Dishmachines... Manuel utilisateur

Jackson

Jackson Hot Water Sanitizing Undercounter Dishmachines... Manuel utilisateur

Jackson

Jackson TempStar Series Manuel

Jackson

Jackson JPX-300H Manuel utilisateur

Jackson

Jackson Delta HT-E-SEER-S Guide de configuration

Jackson

Jackson RackStar 44 Guide de configuration

Jackson

Jackson DISHSTAR HT-E Guide de l'utilisateur

Jackson

Jackson Hot Water Sanitizing Undercounter Dishmachines... Manuel utilisateur

Jackson

Jackson DynaTemp Manuel utilisateur

Jackson

Jackson TEMPSTAR Manuel utilisateur

Jackson

Jackson CONSERVER XL-E Guide de l'utilisateur

Jackson

Jackson 24P-NSU Manuel utilisateur

Jackson

Jackson CONSERVER XL2 Guide de l'utilisateur

Jackson

Jackson CONSERVER XL-E Guide de configuration

Jackson

Jackson Enodis 300X Manuel utilisateur

Jackson

Jackson JP-24BPNSU Manuel utilisateur

Jackson

Jackson CONSERVER 24LT Manuel utilisateur

Jackson

Jackson Avenger HT Manuel utilisateur

Jackson

Jackson Avenger LT Manuel utilisateur

Jackson

Jackson crew series Guide de configuration

Manuels Lave-vaisselle populaires d'autres marques

Electrolux

Electrolux ESI5211LOX Manuel utilisateur

KitchenAid

KitchenAid KUDB230B Manuel utilisateur

Brandt

Brandt BDJ424DB Manuel utilisateur

Asko

Asko DSD767UXXL.AU Manuel utilisateur

Beko

Beko DFN26210W Manuel utilisateur

NEFF

NEFF S153ITX00E Fiche technique

Midea

Midea SV 4.45 wi Manuel utilisateur

LG LDF7932 Manuel utilisateur

Gorenje

Gorenje GV63214 Manuel utilisateur

Hotpoint

Hotpoint HDA1100ZWH Manuel de service

Blomberg

Blomberg LDFN2240W Manuel utilisateur

AEG

AEG FFB83836PM Manuel utilisateur

Cylinda

Cylinda DM3220RFD Manuel utilisateur

Atag

Atag DW8214MB Manuel utilisateur

GE GLD8000 Series Manuel utilisateur

Siemens

Siemens SN23HI02KE Fiche technique

Omega

Omega ODW717X Manuel utilisateur

BORETTI

BORETTI BVW-683 Manuel utilisateur