Jabra Pro 9460 Mono Manuel utilisateur

How do I connect my headset with my Alcatel IP Touch 4029

or 4039?

Jabra Pro 9460 Mono

Requirements:

Jabra Link 14201-36

To connect your headset, please follow these steps:

1. At the 2-sided end, plug the RJ45 connector (red band) in the red socket

marked AUX on the Jabra device base.

2. Plug the RJ9 connector (blue band) into the blue socket marked with

the phone symbol on the Jabra device base.

3. For the 2-fold Y coupling end, plug the 3.5 mm phone connector into

the headset interface.

4. Plug the RJ12 connector into the socket marked by a bell on the phone.

5. Plug the phone cable for the phone directly into the additional

connection socket of the Y-cable.

6. Then follow the instructions on the Jabra device touch screen:

a. Select Phone settings.

b. Select Connect desk phone.

c. Select Manual.

06/04/2021 08:28

https://www.jabra.co.nz/supportpages/jabra-pro-9460/9460-25-707-103/faq/eb3212f1-

798d-437a-a9f5-c285d6e03c4d

Page 1 of 4

d. Select adapter type MSH.

6. For the base settings on the phone:

a. Set the phone setup switch to position A.

06/04/2021 08:28

https://www.jabra.co.nz/supportpages/jabra-pro-9460/9460-25-707-103/faq/eb3212f1-

798d-437a-a9f5-c285d6e03c4d

Page 2 of 4

B. We recommend the microphone volume is set to 7 out of 13.

Guided setup:

As a part of the installation, you can dial into your local Jabra setup server,

which will configure the audio path. Follow the instructions shown on the

display. If your Jabra setup server is unavailable, contact your local Jabra

Support team.

Phone settings with device software version 9.xx and later:

Phone settings are no longer required. Once the phone connector has been

inserted correctly, a headset symbol should appear in the “phone” display.

If the headset symbol does not appear, check the following settings:

Menu>Settings>Phone>Phone connector>Activate/select headset

06/04/2021 08:28

https://www.jabra.co.nz/supportpages/jabra-pro-9460/9460-25-707-103/faq/eb3212f1-

798d-437a-a9f5-c285d6e03c4d

Page 3 of 4

Phone settings with device software version earlier than 9.xx:

Note that the “Force Headset” function must not be activated on the

device as this will prevent you from accepting external calls.

Menu>Settings>Phone>Phone connector>Force headset OFF

Menu>Settings>Phone>Socket>Activate headset

Ringtone signal/phone settings:

Select the ringtone from

Menu>Settings>Ringtone>Internal/External. Note that the ringtone signal

on the headset is transferred only if one of the following ringtones is

selected:

Standard / Classic / Cold River / Dooing-Dooing

If you have set the correct ringtone and you still do not have a ringtone

signal, check the following settings:

Menu>Settings>Phone>Internal/External>Additional options. Set the

following options to “OFF”: No tone, Progressive, Beeps.

Calls using the headset can be connected/transferred as follows:

1. Dial the phone number.

2. “Transfer” will now appear on the phone display.

3. Press the associated function button next to the phone display.

4. End the conversation using the button marked “Headset”.

06/04/2021 08:28

https://www.jabra.co.nz/supportpages/jabra-pro-9460/9460-25-707-103/faq/eb3212f1-

798d-437a-a9f5-c285d6e03c4d

Page 4 of 4

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Jabra casque

Jabra

Jabra SUPREME Manuel utilisateur

Jabra

Jabra EASYGO Manuel utilisateur

Jabra

Jabra GN8210 - DATASHEET 2 Manuel utilisateur

Jabra

Jabra BIZ 620 USB Duo Manuel utilisateur

Jabra

Jabra BT350 - Headset - Over-the-ear Manuel utilisateur

Jabra

Jabra BT325s Manuel utilisateur

Jabra

Jabra PRO 9465 DUO Guide de sécurité

Jabra

Jabra BOOST Manuel utilisateur

Jabra

Jabra BT 3010 Manuel utilisateur

Jabra

Jabra GN 8000 MPA Manuel utilisateur

Jabra

Jabra WAVE Manuel utilisateur

Jabra

Jabra STEALTH OTE18 Fiche technique

Jabra

Jabra Storm Fiche technique

Jabra

Jabra Pro 9460 Mono Manuel utilisateur

Jabra

Jabra GN2100 Manuel utilisateur

Jabra

Jabra Evolve2 65 Manuel utilisateur

Jabra

Jabra BT200 - Headset - Over-the-ear Manuel utilisateur

Jabra

Jabra Elite 7 Pro Manuel utilisateur

Jabra

Jabra PRO 920 Manuel utilisateur

Jabra

Jabra PRO 9465 DUO Manuel utilisateur

Jabra

Jabra CLEAR Manuel utilisateur

Jabra

Jabra Elite 65t Manuel utilisateur

Jabra

Jabra GN9125 Flex Manuel utilisateur

Jabra

Jabra BT 620s Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur

Southwing

Southwing SA505 Manuel utilisateur

Plantronics

Plantronics VOYAGER 520 Manuel utilisateur

Blueant

Blueant X5i Manuel utilisateur