Jabra JX 10 Manuel utilisateur
English – Français – Español
Jabra JX 10 with Bluetooth Hub
2
Headset Setup and Charging
Adjusting headset for your comfort 4
Charging your headset 5
Turning your headset on 5
Bluetooth Hub Setup and Use (for Desk Phone)
Connecting Bluetooth Hub with desk phone and power supply 6
Making a test call on your desk phone to adjust settings 7
Making and ending a call via desk phone 9
Answering an incoming call to desk phone 11
Mobile Phone Setup and Use
Pairing headset to mobile phone 12
Making and ending a call from mobile phone 13
Using Voice Dial 14
Answering an incoming call to mobile phone 14
Quick Reference
Operating the Answer/End button 15
What the lights mean 16
Content
English
3
In the box
Before you begin setup, be sure all parts have
been above 32°F/0°C for at least 30 minutes.
A. Jabra JX 10 headset
1. Light indicator (LED)
2. Volume controls
3. Charging socket
4. Answer/End button (also On/Off)
5. Pairing button
6. Microphone
7. Speaker
8. Earhook
B. Jabra Bluetooth Hub
9. Dial Tone Finder
10. Light indicator (LED)
11. Pairing button
12. Microphone volume control
13. AUX socket
14. Handset socket
15. Desk phone socket
16. Reset button
17. Desk stand socket (not for use with Jabra JX 10
headset)
18. Power supply socket
4
C
5
6
8
7
215
12
11
10
9
B
14 13
18
16
17
3
1
AD
E
F
English
A B D
C
E
F
C. Desk stand
D. Bluetooth Hub power supply
E. Headset power supply
F. Desk phone-Bluetooth Hub connection cord
4
Headset Setup and Charging
English
Adjusting headset for your comfort
Headset is preset for use on right ear. Switch if necessary.
1
Bend to fit.
2
Adjust speaker volume (how others sound to you) on headset.
3
5
Press headset Answer/End button for 1 sec. Blue flash.
6
Red = charging. Green = fully charged (approximately 2 hrs.).
5
4
Charging your headset
English
Charge via desk stand or Charge directly (handy for travel).
Turning your headset on
Important: Make sure your headset is
inactive while charging.
6
For desk phones with headset port
Connecting Bluetooth Hub with desk phone and power supply
If your desk phone has a headset port, see instructions in inset.
For desk phones without headset port: if your desk phone has an electronic hookswitch lifter, or
you are using a GN 1000 (remote handset lifter), please refer to the User Manual on the supplied CD-ROM
for instructions.
Connect handset to Bluetooth Hub.
2
1 2
Disconnect handset from desk phone.
1
Connect power supply to Bluetooth Hub.
4
Connect desk phone with Bluetooth Hub using
supplied connection cord (F).
3
Bluetooth Hub Setup and Use (for Desk Phone)
Connect desk phone with Bluetooth Hub using
supplied connection cord (F). Connect power supply to Bluetooth Hub.
English
6
7
Making a test call on your desk phone to adjust settings
If your desk phone has an electronic hookswitch lifter, or you are using a GN 1000 (remote handset lifter),
please refer to the User Manual on the supplied CD-ROM for instructions.
Place headset on ear.
1
Press the appropriate desk phone button to
establish a clear dial tone.
2
Lift desk phone handset.
2
3
For desk phones with headset port
Listen for dial tone in headset.
Tap headset Answer/End button.
4
English
8
7
If necessary, find a clear dial tone via settings A-G on Bluetooth Hub Dial Tone Finder is preset to setting A
(most commonly used).
5
6
Adjust microphone volume (how your voice sounds
to others) via Bluetooth Hub.
Dial a friend to test settings.
Press the appropriate button on desk phone AND
tap headset Answer/End button.
8
To end call, replace desk phone handset AND
tap headset Answer/End button.
8
For desk phones with headset port
English
9
Making and ending a call via desk phone
If your desk phone has an electronic hookswitch lifter, or you are using a GN 1000 (remote handset lifter),
please refer to the User Manual on the CD-ROM for instructions.
English
Place headset on ear.
1
Press the appropriate desk phone button to
establish a clear dial tone.
3
Lift desk phone handset.
3
4
For desk phones with headset port
Dial number. Dial number.
4
Tap headset Answer/End button.
2
9
10
For desk phones with headset port
6
Begin talking.
5
To end call, replace desk phone handset AND tap headset Answer/End button.
6
For desk phones with headset port, press the appropriate button on desk phone AND
tap headset Answer/End button.
English
10
Autres manuels pour JX 10
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Jabra casque
Jabra
Jabra LINK 14201-33 Guide de démarrage rapide
Jabra
Jabra GO 6430 Manuel utilisateur
Jabra
Jabra Pro 920 Mono Manuel utilisateur
Jabra
Jabra CLASSIC Fiche technique
Jabra
Jabra STREET BT3030 Guide de référence
Jabra
Jabra PRO 935 Manuel utilisateur
Jabra
Jabra PRO 920 Manuel utilisateur
Jabra
Jabra ELITE 4 ACTIVE Manuel utilisateur
Jabra
Jabra Pro 9450 Mono Manuel utilisateur
Jabra
Jabra Pro 920 Mono Manuel utilisateur
Jabra
Jabra Pro 93 Manuel utilisateur
Jabra
Jabra BT 125 Manuel utilisateur
Jabra
Jabra GN 9120 DG Manuel utilisateur
Jabra
Jabra BT135 - Headset - Over-the-ear Manuel utilisateur
Jabra
Jabra Elite 25e Manuel utilisateur
Jabra
Jabra EVOLVE2 85 Fiche technique
Jabra
Jabra GN 2000 - ANNEXE 736 Manuel utilisateur
Jabra
Jabra 405-FLEX-SF Profile SureFit Manuel utilisateur
Jabra
Jabra C650 Manuel utilisateur
Jabra
Jabra Link 14201-10 Manuel utilisateur
