Jabra 14201-36 Guide d'installation et d'utilisation

How to connect my Jabra PRO 92x with Alcatel IP Touch 4028,

4038, 4068

Jabra Alcatel MSH Adapter for Go/Pro

Prerequisite:

Jabra PRO 92x + Jabra 14201-36 cable

In combination with one of the following phones:

IP Touch 4028

IP Touch 4038

IP Touch 4068

Connection:

2-sided end:

Insert the RJ45 plug (red band) into the red socket marked with "AUX" and

the RJ10 plug (blue band) into the blue base socket of the Jabra PRO 92x

marked with a “phone” symbol.

2-fold Y-coupling end:

Insert the 3.5 mm audio jack into the headset interface and the RJ12 plug

into the bell socket of the phone. The extra connector socket on the Y-

coupling remains free for connection to an IP phone!

Now you can setup the headset for your phone with the automatic or

manual configuration.

07/04/2021 01:15

https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa-

4d6f-90ab-fddf39d431fb

Page 1 of 4

Automatic configuration:

To start the automatic configuration, please let someone call you on this

phone; wait at least 10 seconds before you pick up the phone. Now the

appropriate EHS mode should be set up.

If the automatic configuration did not work, please select the MSH mode

manually. (See manual).

Base setup:

Set the phone setup switch to position "A".

Microphone volume setting:

07/04/2021 01:15

https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa-

4d6f-90ab-fddf39d431fb

Page 2 of 4

Put on the headset and call a colleague, for example.

Now you can select the desired microphone volume using the +/- button.

Phone setup with system software version 9.xx and higher:

No settings are required on the phone to use a headset. Following the

correct adaptation of the audio jack, a headset symbol should appear in

the “Phone display”. If the headset symbol does not appear, please check

the following settings:

Menu> Settings> Phone> Audio Jack> Headset/Activate/Select.

Phone setup with system software version below version 9.xx:

Important: The “Force Headset” function must not be activated on the

phone, as otherwise it will not be possible to accept external calls.

Menu> Settings> Phone> Audio Jack>Force headset OFF

Menu> Settings> Phone> Socket > Activate headset

Dial tone signal transfer/ phone setup:

Important: The dial tone signal in the headset is only transmitted if one of

the following ringtones is used, e.g. Standard/ Classic / Cold River /

Dooing-Dooing. > Menu> Settings> Dial Tone > Internal / External

07/04/2021 01:15

https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa-

4d6f-90ab-fddf39d431fb

Page 3 of 4

Should the dial tone signal transfer not work although you have setup the

correct ringtone, please check the following settings:

Menu > Settings > Phone > Internal/External, more options

No sound, Progressive, Beeps> all points must be set to "OFF".

Calls being made via the headset can be connected / forwarded as follows:

Dial the phone number > "Forward" will now appear in the phone display >

now press on to the appropriate function key next to the phone display >

thereafter you must end the call with the button marked "Handset".

07/04/2021 01:15

https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa-

4d6f-90ab-fddf39d431fb

Page 4 of 4

Table des matières

Autres manuels Jabra Adaptateur

Jabra

Jabra GN L8464 Manuel utilisateur

Jabra

Jabra A320s Manuel utilisateur

Jabra

Jabra A210 Manuel utilisateur

Jabra

Jabra HHC ADAPTER - DATASHEET CISCO Manuel utilisateur

Jabra

Jabra A210 Manuel utilisateur

Jabra

Jabra GN 8110 USB-XP Manuel utilisateur

Jabra

Jabra A120s Manuel utilisateur

Jabra

Jabra LINK 220 Manuel utilisateur

Jabra

Jabra A120s Manuel utilisateur

Jabra

Jabra A320s Manuel technique

Jabra

Jabra LINK 280 - Manuel utilisateur

Jabra

Jabra A120s Manuel utilisateur

Jabra

Jabra LINK 14201-17 - Manuel utilisateur

Jabra

Jabra Link 14201-40 Manuel utilisateur

Jabra

Jabra Link 360 Manuel utilisateur

Jabra

Jabra Link 950 USB-A Manuel utilisateur

Jabra

Jabra LINK 14201-36 Guide d'installation et d'utilisation

Jabra

Jabra GN 8110 USB-XP Manuel utilisateur

Jabra

Jabra LINK 260 Manuel utilisateur

Jabra

Jabra GN Ellipse 2.4 Manuel utilisateur

Jabra

Jabra Link 360 Manuel utilisateur

Jabra

Jabra A320s Manuel utilisateur

Jabra

Jabra Avaya EHS Manuel utilisateur

Jabra

Jabra A125s Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur