J-Tech Digital ProAV Series Manuel utilisateur
Operating Instructions
Explore The High Definition World
Website:www.jtechdigital.com
Hot Line:1-888-610-2818[US]
JTECH-HDT150
J-Tech Digital® ProAV® Series
150M HDBaseT 1080P Extender
JTD-223
1
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this manual for future
reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical
spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is
highly recommended in order to protect and extend the life of your equipment.
I. Introduction
The HDMI Extender can extend HDMI signal over 500 feet/150 meters to an HDMI
compatible display via single Cat5e/6 cable. It also supports bi-directional Infrared control
signal and RS-232 transmission together with HDMI signal, it can allow you to easily
control your DVD player at TV side or control your TV at the DVD player side when
using this extender.
2
II. Features
1.HDMI 1.4, HDCP 1.4 and DVI compliant
2.Video resolutions up to 1080p@60Hz (YUV4:4:4)
3.HDMI High Bit Rate(HBR) audio pass through
4.150 meters transmission distance over CAT6 cable
5.POC (Power over Cable), either TX or RX is powered by one 24V@1A power supply
See the description 1
6.Bi-directional infrared control signal transmission
See the description 2
7.Bi-directional RS-232 signal transmission
See the description 3
III. Package
HDMI Extender Transmitter --------------------------------------- 1PCS
HDMI Extender Receiver -------------------------------------------1PCS
Wideband IR emitter cable ------------------------------------------1PCS
Wideband IR Receiver cable ----------------------------------------1PCS
24V/1A Power Adaptor ----------------------------------------------1PCS
User Manual ---------------------------------------------------------- 1PCS
3
IV. Specifications
Technical
HDMI Compliance
HDMI 1.4
HDCP Compliance
HDCP 1.4
Video Bandwidth
225MHz
Video Resolutions
up to1080P @60Hz YUV4:4:4、RGB4:4:4
Color Space
RGB, YUV4:4:4, YUV 4:2:2
Color Depth
8-bit
HDMI Audio
Formats
(Pass-through)
LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+,
Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
4
ESD Protection
Human body model — ±8kV (air-gap discharge) & ±4kV
(contact discharge)
Connections
Inputs
Transmitter :1x HDMI Type A [19-pin female]
1x IR INPUT [3.5mm Stereo Mini-jack]
1x RS232 [Phoenix jack]
Receiver: 1x HD BaseT In [RJ45]
1x IR INPUT [3.5mm Stereo Mini-jack]
1x RS232 [Phoenix jack]
Outputs
Transmitter : 1x HD BaseT Out [RJ45]
1x IR OUTPUT [3.5mm Stereo Mini-jack]
Receiver: 1x HDMI Type A [19-pin female]
1x IR OUTPUT [3.5mm Stereo Mini-jack]
5
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
115mm [W] x 64.7mm [D] x 17mm [H]
Weight
406g
Power Supply
Input: AC100 - 240V 50/60Hz
Output: DC 5V/1A (US/EU standards, CE/FCC/UL certified)
Power Consumption
5.76W (Max)
Operation
Temperature
32 - 104°F / 0 - 40°C
Storage temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)
6
V. Operation Controls and Functions
Front panel
1.Power: System power indicator.
2.DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply.
3.HDBaseT Out: Standard HDBaseT output port. Connect HDBaseT receiver with a UTP
7
cable following the standard of direct interconnection method.
4.HDMI In: Connect to HDMI source device such as Blu-ray or PS4 player.
5.IR In: Channel 2 IR Receiver. Connect to an IR receiver cable.
6.IR Out: Channel 1 IR Transmitter. Connect to an IR emitter cable.
7.RS-232: Phoenix jack provide serial port control from transmitter to receiver.
8.Connection Signal Indicator Lamp
Illuminate: The Transmitter and Receiver are in good connections status.
Flashing: The Transmitter and Receiver are in poor connections status.
Dark: The Transmitter and Receiver are not connected.
9.Data Signal Indicator Lamp
Illuminate: HDMI signal with HDCP.
Flashing: HDMI signal without HDCP.
Dark: No HDMI signal.
8
Receiver
1.Power: System power indicator.
2.DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply.
3.HDBaseT In: Standard HDBaseT input port. Connect HDBaseT
Transmitter with a UTP cable following the standard of direct
interconnection method.
9
4.HDMI Out: Connect to the HDTV or monitor HDMI input port.
5.IR In: Channel 1 IR Receiver. Connect to an IR receiver cable.
6.IR Out: Channel 2 IR Transmitter. Connect to an IR emitter cable.
7.RS-232: Phoenix jack provide Serial port control signal from
transmitter to receiver.
8.Connection Signal Indicator Lamp
Illuminate: The Transmitter and Receiver are in good connections status.
Flashing: The Transmitter and Receiver are in poor connections status.
Dark: The Transmitter and Receiver are not connected.
Flashing: HDMI signal without HDCP.
Dark: No HDMI signal.
Ce manuel convient aux modèles suivants
1
Autres manuels J-Tech Digital Extenseur
J-Tech Digital
J-Tech Digital JTD-2980 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTECH-BE100 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-416 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-190 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-2860 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTECH-4K88-EX2 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-3023 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-1651 Manuel utilisateur
J-Tech Digital
J-Tech Digital ARC-HDEX40ARC Manuel utilisateur
J-Tech Digital
J-Tech Digital JTECH-ex2 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTDHDEX-1 Manuel utilisateur
J-Tech Digital
J-Tech Digital UHDT150 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-2987 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-229 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-185 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-3033 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-2865 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-183 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTECH-WEX-22 Manuel utilisateur
J-Tech Digital
J-Tech Digital JTD-611V3 Manuel utilisateur
