ITRON Intelis Manuel utilisateur
Intelis Gas Meter Installation Guide
Technical
Communications
knowledge to shape your future
Identification
Intelis Gas Meter Installation Guide
8 March 2019
TDC-1782-002
Copyright
© 2018-2019 Itron, Inc. All rights reserved.
Confidentiality Notice
The information contained herein is proprietary and confidential and is being provided
subject to the condition that (i) it be held in confidence except to the extent required
otherwise by law and (ii) it will be used only for the purposes described herein. Any third
party that is given access to this information shall be similarly bound in writing.
Trademark Notice
Itron is a registered trademark of Itron, Inc.
All other product names and logos in this documentation are used for identification purposes
only and may be trademarks or registered trademarks of their respective companies.
Suggestions
For more information about Itron or Itron products, see www.itron.com.
If you have questions or comments about the software or hardware product, contact Itron
Technical Support Services.
Contact
• Email: [email protected]
• Itron Access: https://support.itron.com
• Telephone Itron Technical Support North America: 1-877-487-6602
For technical support contact information by region, go to www.itron.com and select your
country and language.
Contents
Chapter 1 Important Safety and Compliance Information.............................. 1
USA, FCC Part 15 spectrum compliance............................................................................................................. 1
Canada, ISED spectrum compliance....................................................................................................................2
RF Exposure (FCC/ISED)...................................................................................................................................... 2
Australia, ACMA spectrum compliance................................................................................................................ 2
Electromagnetic compatibility...............................................................................................................................3
Intrinsic safety.......................................................................................................................................................3
Lithium battery...................................................................................................................................................... 3
Transportation classication................................................................................................................................. 3
Electrostatic discharge..........................................................................................................................................3
Electrostatic ignition hazard..................................................................................................................................4
Device cleaning.....................................................................................................................................................4
Do not drop...........................................................................................................................................................4
Product notication...............................................................................................................................................5
Chapter 2 Intelis Gas Meter................................................................................6
Related documents...............................................................................................................................................6
Intelis Gas Meter models...................................................................................................................................... 7
Intelis Gas Meter components..............................................................................................................................7
Internal safety shutoff valve....................................................................................................................... 7
Automatic shutoff conguration..........................................................................................................7
Integrated 500G communications module.................................................................................................8
Intelis Gas Meter specications............................................................................................................................8
Intelis Gas Meter dimensions .............................................................................................................................10
Chapter 3 Installing the Intelis Gas Meter.......................................................11
Prior to start-up...................................................................................................................................................12
Start-up...............................................................................................................................................................12
Removing or installing the pipe plug.................................................................................................................. 13
Removing the pipe plug........................................................................................................................... 13
Installing the pipe plug............................................................................................................................. 14
Chapter 4 Intelis Gas Meter LCD Operation................................................... 15
The Intelis Gas Meter LCD..................................................................................................................................15
Intelis Gas Meter LCD display alarms......................................................................................................17
Additional LCD screen displays............................................................................................................... 19
Intelis Gas Meter LCD display icons........................................................................................................ 19
Performing an LCD test............................................................................................................................20
Chapter 5 Proving the Intelis Gas Meter......................................................... 21
Intelis Gas Meter Test Mode............................................................................................................................... 22
Entering Test Mode.................................................................................................................................. 22
Recording Test Mode consumption......................................................................................................... 22
Exiting Test Mode.....................................................................................................................................23
Prover types........................................................................................................................................................23
Intelis Gas Meter Installation Guide TDC-1782-002 iii
Proprietary and Confidential
Proving the Intelis Gas Meter using the Honeywell SNAP proving system............................................. 23
Tempering the meter by exercising...................................................................................................24
Setting up the prover........................................................................................................................ 25
Proving the Intelis Gas Meter............................................................................................................29
Proving the Intelis Gas Meter using the Measurement Systems proving system....................................32
Temper the meter by exercising the meter....................................................................................... 33
Setting up the Measurement Systems prover.................................................................................. 34
Proving the Intelis Gas Meter............................................................................................................42
Proving the Intelis Gas Meter using the Energy Economics (EEI) proving system...................................44
Temper the meter by exercising the meter....................................................................................... 44
Setting up the EEI prover..................................................................................................................46
Proving the Intelis Gas Meter............................................................................................................50
Chapter 6 Adjusting the Intelis Gas Meter Calibration.................................. 52
To adjust the calibration of an Intelis Gas Meter.................................................................................................52
To seal an Intelis gas meter.................................................................................................................................58
To unseal an Intelis gas meter's UMU................................................................................................................ 60
Chapter 7 Intelis Gas Meter Index Replacement............................................62
Replacing the Intelis Gas Meter index assembly................................................................................................62
Intelis Gas Meter Installation Guide TDC-1782-002 iv
Proprietary and Confidential
Chapter 1 Important Safety and Compliance
Information
This section provides important information for your safety and product compliance.
USA, FCC Part 15 spectrum compliance
This device complies with Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference that may cause undesirable operation.
This device must be installed to provide a separation distance of at least 20 centimeters (7.9
inches) from all persons to be compliant with regulatory RF exposure.
USA, FCC Class B-Part 15
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio or TV technician for help.
Modifications and Repairs
To ensure system performance, this device and antenna shall not be changed or modified
without the express approval of Itron. Per FCC rules, unapproved modifications or operation
beyond or in conflict with these instructions for use could void the user's authority to operate
the equipment.
Intelis Gas Meter Installation Guide TDC-1782-002 1
Proprietary and Confidential
Canada, ISED spectrum compliance
Compliance Statement Canada Déclaration de Conformité
This device complies with Innovation, Science
and Economic Development Canada (ISED)
license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
Under Innovation, Science and Economic
Development Canada (ISED) regulations, this
radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada.
To reduce potential radio interference to other
users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary
for successful communication.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes: (1)
l'appareil ne doit pas produire de brouillage, (2)
l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
Conformément à la réglementation d'Industrie
Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un
gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.)
ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication
satisfaisante.
RF Exposure (FCC/ISED)
This equipment complies with radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body. This transmitter must not
be co-located or operating in conjunction with
any other antenna or transmitter.
Cet équipement est conforme aux limites
d'exposition aux radiations dans un
environnement non contrôlé. Cet équipement do
it être installé et utilisé à distance minimum de 20
cm entre le radiateur et votre corps. Cet émetteur
ne doit pas être co-localisées ou opérant en
conjonction avec tout autre antenne ou
transmetteur.
Australia, ACMA spectrum compliance
When this device is sold and shipped to Australia, it is configured and labeled accordingly to
be compliant with ACMA Standards for the Radio, EMC and RF Exposure. This includes
standard AS/NZS 4268 RF spectrum standard for frequency and power out.
Important Safety and Compliance Information
Intelis Gas Meter Installation Guide TDC-1782-002 2
Proprietary and Confidential
Electromagnetic compatibility
Caution: Use only approved accessories with this equipment. All cables must be
high quality, shielded, and correctly terminated. Unapproved modifications or
operation beyond or in conflict with these use instructions may void the authority's
authorization to operate the equipment.
Intrinsic safety
Warning: Substitution of components may impair intrinsic safety.
Lithium battery
Warning: Follow these procedures to avoid injury to yourself or others.
• The lithium battery may cause a fire or chemical burn if it is not disposed of
properly.
• Do not recharge, disassemble, heat above 212°Fahrenheit (100°C Celsius),
crush, expose to water, or incinerate the lithium battery. Fire, explosion, and
severe burn hazard.
• The battery used in this device may present a risk of fire or chemical burn if
mistreated.
• Keep the lithium battery away from children.
Transportation classification
The Federal Aviation Administration prohibits operating transmitters and receivers on all
commercial aircraft. When powered and not in Factory ship mode, the Itron device is
considered an operating transmitter and receiver and cannot be shipped by air. All product
returns must be shipped by ground transportation.
Electrostatic discharge
Warning: Internal circuit components can be sensitive to electrostatic discharge.
Before installation, discharge electrostatic buildup by touching a metal pipe or other
earth-grounded metal object prior to touching the meter body, register housing, or
Itron device.
Important Safety and Compliance Information
Intelis Gas Meter Installation Guide TDC-1782-002 3
Proprietary and Confidential
Electrostatic ignition hazard
Warning: Verify the area is not hazardous when installing, servicing, cleaning, or
touching the Itron device.
Device cleaning
Warning: Clean only with a damp cloth.
Do not drop
Warning: While Itron meters are designed to withstand a drop, dropping the meter
may damage the device, impact the meter accuracy, and void the warranty.
Important Safety and Compliance Information
Intelis Gas Meter Installation Guide TDC-1782-002 4
Proprietary and Confidential
Product notification
Warning: These instructions are not intended to replace any utility or company-
established meter installation procedures. These instructions are provided for
additional information when the Intelis Gas Meter is installed. The meter installation
must comply with all country, state, and local building and safety regulations as well
as federal regulations including Section 192.353 of Title 49 of the Code of Federal
Regulations. Two pertinent paragraphs of the code are:
• Each meter and service regulator, whether inside or outside of a building must be
in a readily accessible location and be protected from corrosion and other
damage.
• Each meter installed within a building must be located in a ventilated place and
not less than 3 feet from any source of ignition or any source of heat which might
damage the meter.
The Intelis Gas Meter is rated for the following operating and storage temperature
ranges. Use of the meter outside of the listed temperature ranges is not
recommended.
• Operating ranges:
◦ Measurement -30° F (-34° C) to +131° F (55° C)
◦ Valve -13° F (-25° C) to +131° F (55° C)
◦ 500G -40° F (-40° C) to +158° F (70° C)
• Storage range:
◦ -40° F (-40° C) to +158° F (70° C)
Direct customer inquiries as to the selection and application of gas meters to your
local Itron sales representative or Itron Support.
• Itron does not endorse or warrant the completeness or accuracy of any third-party
meter installation procedures or practices, unless otherwise provided in writing by
Itron.
• Follow your company's standard operating procedures regarding the use of
personal protection equipment (PPE).
• Adhere to guidelines issued by your company in addition to those given in this
document when installing or repairing meters.
• This product, as of the date of manufacture, is designed and tested to conform to
all governmental and industry safety standards as they may apply to the
manufacturer.
• The purchaser and user of this product must comply with all fire control, building
codes, and other safety regulations governing the application, installation,
operation, and general use of this meter to avoid leaking gas hazards resulting
from improper installation, start-up, or use of this product.
• To ensure safe and efficient operation of this product, Itron strongly recommends
installation by a qualified professional.
Important Safety and Compliance Information
Intelis Gas Meter Installation Guide TDC-1782-002 5
Proprietary and Confidential
Chapter 2 Intelis Gas Meter
The Intelis Gas Meter is a solid state ultrasonic meter featuring an internal safety shut-off
valve, built-in temperature conversion, and an integrated 500G communications module.
The meter supports the listed functionality.
• High flow alarm with optional automatic valve shutoff.
• High temperature alarm and optional automatic valve shutoff.
• Air detection.
• Reverse flow detection.
The Intelis Gas Meter can be configured for Mobile Mode or OpenWay Riva Network Mode.
This compact meter weighs only 4-1/2 pounds and mounts well within existing meter
footprints for easy meter installation and replacement of existing gas meters.
Note: OpenWay Riva Network Mode functionality will be available in a future Riva release.
Related documents
For more information about the Intelis Gas Meter and compatible system architecture
documentation, see your product's documentation.
Document Itron part number
Intelis Gas Meter Technical Reference Guide TDC-1805-XXX
Intelis Gas Meter Ordering Guide PUB-1309-000
Intelis Gas Meter Specification Sheet 101584-SP-XX
Intrinsic Safety Control Drawing Index Module Replacement
Intelis Gas Meter
TDC-0908-009
OpenWay® Operations Center Collection Manager Device
Interface Guide
TDC-7083-XXX
Itron Security Manager User Guide TDC-1380-009
Field Deployment Manager Tools Configuration Guide TDC-1711-XXX
Intelis Gas Meter Installation Guide TDC-1782-002 6
Proprietary and Confidential
Autres manuels pour Intelis
1
Table des matières
Autres manuels ITRON Instrument de mesure
ITRON
ITRON Intelis Manuel utilisateur
ITRON
ITRON Centron Manuel d'utilisation et d'entretien
ITRON
ITRON Intelis Gas Meter Manuel utilisateur
ITRON
ITRON Bluetooth RF Master Manuel utilisateur
ITRON
ITRON DN15 Manuel utilisateur
ITRON
ITRON EM512 TYPE 700 JV1 Manuel utilisateur
ITRON
ITRON Mobile Collector Lite Manuel utilisateur
ITRON
ITRON Delta Manuel utilisateur
ITRON
ITRON CENTRON C1SR Manuel d'utilisation et d'entretien
ITRON
ITRON CENTRON CP1S Manuel d'utilisation et d'entretien
ITRON
ITRON 100G Manuel utilisateur
ITRON
ITRON OpenWay Riva IRM-STAR Manuel utilisateur
ITRON
ITRON G16 Manuel utilisateur
ITRON
ITRON X61 Manuel utilisateur
ITRON
ITRON Axonic Manuel utilisateur
ITRON
ITRON SHARPFLOW SWB7 Manuel utilisateur
ITRON
ITRON Delta Series Manuel utilisateur
ITRON
ITRON EquaScan pMIURF Manuel du propriétaire
ITRON
ITRON G10 Manuel utilisateur
ITRON
ITRON OpenWay Intelis Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur