Itm Digi-Sense TraceableLIVE 18000-31 Manuel utilisateur

CONTROLS

WiFi: Enables WiFi capabilities.

SET: Use to set: date/time, alarm settings

(if WiFi has not been congured).

UP: Adjusts setting up in SET menu.

DOWN: Adjusts setting down in SET menu

CHANNEL SELECT: Selects which channel to

display or select all channel view mode to view all

channels.

PLAY/PAUSE: In single channel view mode,

select second line display: current time, current

minimum, current maximum, alarm setting lower

limit, alarm setting higher limit.

C/F: Selects temperature unit

CLEAR: Press to clear current min/max values.

Note: “WiFi enabled” is indicated by the ashing WiFi

symbol. It also indicates that WiFi network needs to

be congured. If WiFi network has been congured,

and WiFi symbol ashes, it indicates an alarm of

unsuccessful data transmission to cloud server.

Press button to clear alarm, or alarm will clear

automatically upon next successful transmission.

DEVICE SPECIFICATIONS:

• Temperature Range: 0 to 50°C (32 to 122°F)

• Humidity Range: 0 to 95%

• Temperature/Humidity Sampling Rate: 9 seconds

• 6525: CO2 Range: 0 to 10,000 ppm (1%)

• 6526: CO2 Range: 0 to 20%

• CO2 Sample rate: 5 min default, user-adjustable

• Default WiFi Transmission Frequency: 15 minutes

• Maximum number of Stored Records: 672 (7 days if set

to 15 minutes interval)

• Max. Stored Alarms: 100

• Battery: 4 AAA Alkaline battery

DISPLAY MODES

SINGLE CHANNEL MODE

• LCD displays information on channel 1, 2, or 3. Scroll

through: current time -> current minimum / current

maximum -> alarm setting minimum / alarm setting

maximum -> current time.

• Scrolling interval: 3 seconds.

• Press CHANNEL SELECT button to select the desired

channel, or all channels.

• Channel 1 displays humidity; Channel 2 displays

temperature; channel 3 displays pressure.

• To pause scrolling, press PLAY/PAUSE. To resume

scrolling, press PLAY/PAUSE again. To fast forward,

press PLAY/PAUSE to move to next item.

• Once desired information is displayed, press Play/

Pause button again to pause scrolling, otherwise

second line resumes scrolling.

ALL CHANNEL MODE

• To view all Channel 1, 2, and 3. Press CHANNEL

SELECT button to select all channels.

• CH123 symbol will appear on display.

SELECTING CHANNEL

• While the device is not in SETUP Mode, press

Channel/Select button to select channel.

• If Channel 1 (HUMIDITY) is selected, CH1 symbol will

appear on display.

• If Channel 2 (TEMPERATURE) is selected, CH2

symbol will appear on display.

• If Channel 3 (CO2) is selected, CH3 symbol will appear

on display.

• If in all channel view mode, the rst line displays

Channel 1, second line Channel 2, and third line

Channel 3. CH123 symbol will appear on display.

SENSORS

6525: A dongle with temperature, humidity, and carbon

dioxide sensor is provided with unit. Used to measure

and monitor ambient temperature, ambient humidity, and

ambient CO2levels.

IMPORTANT: PLUG DONGLE INTO DEVICE BEFORE

INSERTING BATTERIES AS THIS WILL CAUSE

INCORRECT READINGS.

If dongle sensor was plugged into device after batteries

were installed, remove dongle sensor until LCD reads “-

-.- -” on CH1 and CH2 (about 10 seconds) and then plug

dongle back into device.

6526: An external sensor with extended cable is

provided with unit. Used to measure and monitor

temperature, humidity, and carbon dioxide in a chamber

or other enclosed environment.

CLEAR CURRENT MINIMUM/MAXIMUM MEMORY

1. Press CHANNELSELECT to select probe channel to

be cleared.

2. CH1 will clear Channel 1; CH2 will clear Channel 2;

CH3 will clear Channel 3 and in all channel mode

CH123 will clear Channels 1, 2, 3.

3. Press CLEAR button to clear current minimum and

maximum readings.

4. Each clear of the Minimum/Maximum memory will

also trigger a transmission of current reading(s) to

TraceableLIVE service, if connected. This will display

in EVENT HISTORY with label “DEVICE CHECK”.

DEVICE SETUP

SCENARIO 1: WiFi is disabled.All settings are

congurable.

1. Press and hold SET button for 3s to enter setup

menu.

2. The rst ashing number is the year date setting.

Press the UP or DOWN arrow to set to the current

year. Press the PLAY/PAUSE button to save and

proceed to the next setting.

3. Continue to set the remaining parameters (Month-

>Day->Hour->Minute->Time Format (12H/24H)

->Channel 1 Minimum Alarm->Channel 1 Maximum

Alarm->Channel 2 Minimum Alarm->Channel

2 Maximum Alarm->Channel 3 Minimum Alarm

->Channel 3 Maximum Alarm->CO2Sampling Rate

->Alarm Repost Enable/Disable -> Alarm Repost

Interval Setting (if Alarm Repost is enabled). Press

PLAY/PAUSE to proceed to the next parameter.

Pressing PLAY/PAUSE after the last parameter is set

will exit setup mode.

SCENARIO 2: WiFi is enabled. Alarm settings are not

congurable on the device and can only be set through

the TraceableLIVE cloud service interface.

1. Press and hold the SET button for 3 seconds to enter

setup menu.

2. The rst ashing number is the year date setting.

Press the UP or DOWN arrow to set to the current

year. Press the PLAY/PAUSE button to save and

proceed to the next setting.

3. Continue to set the remaining parameters (Month-

>Day->Hour->Minute->Time Format (12H/24H).->

CO2 sampling rate -> Alarm Repost Enable/Disable

-> Alarm Repost Internal Setting (If Alarm Repost

is enabled). Press PLAY/PAUSE to proceed to the

next parameter. Pressing PLAY/PAUSE after the last

parameter is set will exit setup mode.

NOTE: Setting the time while WiFi is enabled is only

intended for initial device setup. Once connected

to the TraceableLIVE service, the device time will

be synchronized daily for selected time zone in

TraceableLIVE.

ALARM

1. If an alarm triggers, the LCD will automatically display

the alarming channel, and the temperature reading, HI

ALM or LO ALM symbols ash. If temperature is below

low alarm setting, MIN symbol ashes; if temperature

is above high alarm setting, MAX symbol ashes.

Audible alarm will continue beeping for 30 seconds

and will beep once every 15 seconds until alarm is

acknowledged by pressing the CLEAR button.

2. If alarms trigger on both channels, LCD will display

Channel 1.

3. Use CHANNEL SELECT to select which channel to

display. If the displayed channel is not alarming, the

LCD will not ash, but the buzzer will remain active.

4. If an alarm is triggered, the second line of the LCD will

no longer scroll, and if the device is in single channel

display mode, the alarming set point will display on the

second line.

5. To clear an alarm, press the CLEAR button. The LCD

will stop ashing, buzzer will stop beeping, and LCD

second line will resume scrolling.

6. Once an alarm is triggered, the device will post the

alert to the TraceableLIVE service immediately. If

connectivity is currently lost, the device will store the

alarm until it reconnects. Devices can store up to 100

alarm events in internal memory.

DISPLAYING °F OR °C

• To display the temperature readings in Fahrenheit (°F)

or Celsius (°C)

on device, press the C/F button.

• Note: Changing from °C to °F in the TraceableLIVE®

Cloud, will not change readings on device (see

TraceableLIVE® Cloud instructions).

• Note: Changing from °C to °F on device, will not

change the readings in the TraceableLIVE® cloud.

CONFIGURE WiFi NETWORK: AP PROVISIONING

• Press WiFi button to enable WiFi function. If it is rst

time enabled, WiFi symbol will ash.

• Press and hold WiFi button for 3 secs until device

displays “AP”. To abort, press and hold WiFi button.

• Press WiFi button again, the device will display “AP

UAIT” (AP WAIT).

• After 5 to 10 seconds, “AP rEAdy” (AP ready) will

appear on display.To abort, press and hold CLEAR

button until the device restarts.

NOTE: WiFi conguration will be cleared if aborted at

this stage.

• Use a mobile phone or wireless capable laptop,

connect to Network ID “CC6525-XXXX” or “CC6526-

XXXX”, where xxxx is last 4-digit of the device’s serial

number (S/N).

• Open a web browser, type 192.168.1.1, the setup

webpage will appear:

• From Add Proles section, from the drop-down

list, select the intended Network ID, and then input

security type, password. Please double check these

information are correct. Security type is default to

WPA2.

• Or if the intended Network ID is not shown in the list,

scroll to the last item of the list “Other, please specify:”

and select. A new input box is shown:

• Type Network ID in the box, and then select security

type and type password;

• Click Add button.

• If network is congured successfully, the device

reboots, and is ready to use.

• If network conguration fails, device displays “Err”, and

then press CLEAR button, the device reboots. Make

sure Network ID, password, and security type are

selected right, and try to congure the network again.

www. .com information@itm.com1.800.561.8187

CONTROLS

WiFi: Enables WiFi capabilities.

SET: Use to set: date/time, alarm settings

(if WiFi has not been congured).

UP: Adjusts setting up in SET menu.

DOWN: Adjusts setting down in SET menu

CHANNEL SELECT: Selects which channel to

display or select all channel view mode to view all

channels.

PLAY/PAUSE: In single channel view mode,

select second line display: current time, current

minimum, current maximum, alarm setting lower

limit, alarm setting higher limit.

C/F: Selects temperature unit

CLEAR: Press to clear current min/max values.

Note: “WiFi enabled” is indicated by the ashing WiFi

symbol. It also indicates that WiFi network needs to

be congured. If WiFi network has been congured,

and WiFi symbol ashes, it indicates an alarm of

unsuccessful data transmission to cloud server.

Press button to clear alarm, or alarm will clear

automatically upon next successful transmission.

DEVICE SPECIFICATIONS:

• Temperature Range: 0 to 50°C (32 to 122°F)

• Humidity Range: 0 to 95%

• Temperature/Humidity Sampling Rate: 9 seconds

• 6525: CO2 Range: 0 to 10,000 ppm (1%)

• 6526: CO2 Range: 0 to 20%

• CO2 Sample rate: 5 min default, user-adjustable

• Default WiFi Transmission Frequency: 15 minutes

• Maximum number of Stored Records: 672 (7 days if set

to 15 minutes interval)

• Max. Stored Alarms: 100

• Battery: 4 AAA Alkaline battery

DISPLAY MODES

SINGLE CHANNEL MODE

• LCD displays information on channel 1, 2, or 3. Scroll

through: current time -> current minimum / current

maximum -> alarm setting minimum / alarm setting

maximum -> current time.

• Scrolling interval: 3 seconds.

• Press CHANNEL SELECT button to select the desired

channel, or all channels.

• Channel 1 displays humidity; Channel 2 displays

temperature; channel 3 displays pressure.

• To pause scrolling, press PLAY/PAUSE. To resume

scrolling, press PLAY/PAUSE again. To fast forward,

press PLAY/PAUSE to move to next item.

• Once desired information is displayed, press Play/

Pause button again to pause scrolling, otherwise

second line resumes scrolling.

ALL CHANNEL MODE

• To view all Channel 1, 2, and 3. Press CHANNEL

SELECT button to select all channels.

• CH123 symbol will appear on display.

SELECTING CHANNEL

• While the device is not in SETUP Mode, press

Channel/Select button to select channel.

• If Channel 1 (HUMIDITY) is selected, CH1 symbol will

appear on display.

• If Channel 2 (TEMPERATURE) is selected, CH2

symbol will appear on display.

• If Channel 3 (CO2) is selected, CH3 symbol will appear

on display.

• If in all channel view mode, the rst line displays

Channel 1, second line Channel 2, and third line

Channel 3. CH123 symbol will appear on display.

SENSORS

6525: A dongle with temperature, humidity, and carbon

dioxide sensor is provided with unit. Used to measure

and monitor ambient temperature, ambient humidity, and

ambient CO2levels.

IMPORTANT: PLUG DONGLE INTO DEVICE BEFORE

INSERTING BATTERIES AS THIS WILL CAUSE

INCORRECT READINGS.

If dongle sensor was plugged into device after batteries

were installed, remove dongle sensor until LCD reads “-

-.- -” on CH1 and CH2 (about 10 seconds) and then plug

dongle back into device.

6526: An external sensor with extended cable is

provided with unit. Used to measure and monitor

temperature, humidity, and carbon dioxide in a chamber

or other enclosed environment.

CLEAR CURRENT MINIMUM/MAXIMUM MEMORY

1. Press CHANNELSELECT to select probe channel to

be cleared.

2. CH1 will clear Channel 1; CH2 will clear Channel 2;

CH3 will clear Channel 3 and in all channel mode

CH123 will clear Channels 1, 2, 3.

3. Press CLEAR button to clear current minimum and

maximum readings.

4. Each clear of the Minimum/Maximum memory will

also trigger a transmission of current reading(s) to

TraceableLIVE service, if connected. This will display

in EVENT HISTORY with label “DEVICE CHECK”.

DEVICE SETUP

SCENARIO 1: WiFi is disabled.All settings are

congurable.

1. Press and hold SET button for 3s to enter setup

menu.

2. The rst ashing number is the year date setting.

Press the UP or DOWN arrow to set to the current

year. Press the PLAY/PAUSE button to save and

proceed to the next setting.

3. Continue to set the remaining parameters (Month-

>Day->Hour->Minute->Time Format (12H/24H)

->Channel 1 Minimum Alarm->Channel 1 Maximum

Alarm->Channel 2 Minimum Alarm->Channel

2 Maximum Alarm->Channel 3 Minimum Alarm

->Channel 3 Maximum Alarm->CO2Sampling Rate

->Alarm Repost Enable/Disable -> Alarm Repost

Interval Setting (if Alarm Repost is enabled). Press

PLAY/PAUSE to proceed to the next parameter.

Pressing PLAY/PAUSE after the last parameter is set

will exit setup mode.

SCENARIO 2: WiFi is enabled. Alarm settings are not

congurable on the device and can only be set through

the TraceableLIVE cloud service interface.

1. Press and hold the SET button for 3 seconds to enter

setup menu.

2. The rst ashing number is the year date setting.

Press the UP or DOWN arrow to set to the current

year. Press the PLAY/PAUSE button to save and

proceed to the next setting.

3. Continue to set the remaining parameters (Month-

>Day->Hour->Minute->Time Format (12H/24H).->

CO2 sampling rate -> Alarm Repost Enable/Disable

-> Alarm Repost Internal Setting (If Alarm Repost

is enabled). Press PLAY/PAUSE to proceed to the

next parameter. Pressing PLAY/PAUSE after the last

parameter is set will exit setup mode.

NOTE: Setting the time while WiFi is enabled is only

intended for initial device setup. Once connected

to the TraceableLIVE service, the device time will

be synchronized daily for selected time zone in

TraceableLIVE.

ALARM

1. If an alarm triggers, the LCD will automatically display

the alarming channel, and the temperature reading, HI

ALM or LO ALM symbols ash. If temperature is below

low alarm setting, MIN symbol ashes; if temperature

is above high alarm setting, MAX symbol ashes.

Audible alarm will continue beeping for 30 seconds

and will beep once every 15 seconds until alarm is

acknowledged by pressing the CLEAR button.

2. If alarms trigger on both channels, LCD will display

Channel 1.

3. Use CHANNEL SELECT to select which channel to

display. If the displayed channel is not alarming, the

LCD will not ash, but the buzzer will remain active.

4. If an alarm is triggered, the second line of the LCD will

no longer scroll, and if the device is in single channel

display mode, the alarming set point will display on the

second line.

5. To clear an alarm, press the CLEAR button. The LCD

will stop ashing, buzzer will stop beeping, and LCD

second line will resume scrolling.

6. Once an alarm is triggered, the device will post the

alert to the TraceableLIVE service immediately. If

connectivity is currently lost, the device will store the

alarm until it reconnects. Devices can store up to 100

alarm events in internal memory.

DISPLAYING °F OR °C

• To display the temperature readings in Fahrenheit (°F)

or Celsius (°C)

on device, press the C/F button.

• Note: Changing from °C to °F in the TraceableLIVE®

Cloud, will not change readings on device (see

TraceableLIVE® Cloud instructions).

• Note: Changing from °C to °F on device, will not

change the readings in the TraceableLIVE® cloud.

CONFIGURE WiFi NETWORK: AP PROVISIONING

• Press WiFi button to enable WiFi function. If it is rst

time enabled, WiFi symbol will ash.

• Press and hold WiFi button for 3 secs until device

displays “AP”. To abort, press and hold WiFi button.

• Press WiFi button again, the device will display “AP

UAIT” (AP WAIT).

• After 5 to 10 seconds, “AP rEAdy” (AP ready) will

appear on display.To abort, press and hold CLEAR

button until the device restarts.

NOTE: WiFi conguration will be cleared if aborted at

this stage.

• Use a mobile phone or wireless capable laptop,

connect to Network ID “CC6525-XXXX” or “CC6526-

XXXX”, where xxxx is last 4-digit of the device’s serial

number (S/N).

• Open a web browser, type 192.168.1.1, the setup

webpage will appear:

• From Add Proles section, from the drop-down

list, select the intended Network ID, and then input

security type, password. Please double check these

information are correct. Security type is default to

WPA2.

• Or if the intended Network ID is not shown in the list,

scroll to the last item of the list “Other, please specify:”

and select. A new input box is shown:

• Type Network ID in the box, and then select security

type and type password;

• Click Add button.

• If network is congured successfully, the device

reboots, and is ready to use.

• If network conguration fails, device displays “Err”, and

then press CLEAR button, the device reboots. Make

sure Network ID, password, and security type are

selected right, and try to congure the network again.

www. .com information@itm.com1.800.561.8187

TraceableLIVE

WiFi

DATALOGGING

CO2METER

WITH REMOTE

NOTIFICATION

INSTRUCTIONS

NOTE: The device date/time is automatically

synchronized to the mobile phone or laptop once the

setup webpage is shown.

NOTE: Make sure Network ID and password are correct;

otherwise the device will wait to connect to the router

until timeout, and then “Err” is shown on LCD.

CONFIGURE WiFi NETWORK: WPS PROVISIONING

• Press WiFi button to enable WiFi function. If it is rst

time enabled, WiFi symbol ashes.

• Press and hold WiFi button for 3s till the device

displays “AP”;

• Press UP or DOWN button to scroll to WPS. “UPS” is

displayed on LCD.

• Press and release WiFi button, the device displays

“AP UAIT”.

• Wait until LCD displays “UPS rEAdy” (WPS ready).

• Press WPS button on the router that the device

is intended to connect to. Please refer to router’s

manual for WPS function.

• If network is congured successfully, the device

reboots, and ready to use.

NOTE: The router has to support WPS, and WPS

function has to be enabled. The device supports only

PUSH BUTTON Method. Pin Code Method is NOT

supported.

NOTE: Using WPS provisioning will not update the

device’s date/time.

HOW TO CONFIGURE WiFi NETWORK:

SMARTCONFIG PROVISIONING

• Press WiFi button to enable WiFi function. If it is rst

time enabled, WiFi symbol ashes;

• Press and hold WiFi button for 3s till the device

displays “AP”;

• Press UP or DOWN button to scroll to SmartCong.

“SnArT” is displayed on LCD;

• Press and release WiFi button, the device displays

“AP UAIT”;

• Wait till LCD displays “SnArT rEAdy” (SMART ready);

• On TI’s WiFi Starter App, enter Network ID and

password, and press Start button.

• If network is congured successfully, the device

reboots, and ready to use.

NOTE: this method requires user to install TI WiFi

Starter app for iOS orAndroid on mobile devices.

NOTE: Using SmartCong provisioning will not update

the device’s date/time.

DATAMEMORY

1. Device is capable of storing 7 days of data if 15

minute logging interval is set.

2. If data transmission fails, data will be stored in data

memory. Stored data will be transmitted automatically

WARRANTY, SERVICE, OR RECALIBRATION

For warranty, service, or recalibration, contact:

Control Company is ISO 9001:2008 Quality-Certi-

ied by DNV and ISO/IEC 17025:2005 accredited

as a Calibration Laboratory by A2LA.

Control Company Cat. No. 6525 / 6526

Traceable®and TraceableLIVE® are registered trademarks

of Control Company.

on next successful transmission.

3. If WiFi network has been congured, and WiFi

connection is lost, data will be stored in data memory

at user-dened logging interval.

4. If WiFi network has not been congured, data will not

be stored in data memory.

5. Stored data in data memory cannot be cleared by

user. It can only be cleared by a successful data

transmission.

ALARM REPOST

• If an alarm triggers and stays in triggered condition,

after a user-dened period, the device will

repost alarm to cloud server even if a user has

acknowledged the alarm.

• Alarm Repost feature is disabled by default, to enable

see DEVICE SETUP.

• Alarm Repost period is set to 60 min by default, a

user can change the interval between 5 minutes to 8

hours (5 minute increments).

DISPLAY MESSAGES

If no buttons are pressed and - - -.- - appears on the

display, this indicates that the temperature being mea-

sured is outside of the temperature range of the unit, or

that the probe is disconnected or damaged.

BENCH STAND

The unit is supplied with a bench stand located on the

back. To use the bench stand, locate the small opening

at the bottom back of the unit. Place your ngernail into

the opening and ip the stand out. To close the stand,

simply snap it shut.

LOW BATTERY POWER INDICATOR

Unit is supplied with 4 AAA alkaline batteries. If the bat-

tery power drops to 20% or lower a low battery symbol

will appear on device display, and an alert will be

sent via TraceableLIVE.

ALL OPERATIONAL DIFFICULTIES

If this thermometer does not function properly for any

reason, please replace the battery with a new high-quality

battery (see “Battery Replacement” section). Low battery

power can occasionally cause any number of “apparent”

operational difculties. Replacing the battery with a new

fresh battery will solve most difculties. If the voltage of

the battery becomes low °C and °F symbols will ash.

BATTERY REPLACEMENT

Erratic readings, a faint display, or no display are all

indications that the battery must be replaced. Slide the

battery cover toward the end of the unit. Remove the

exhausted battery and replace with AAA alkaline battery.

Replace the battery cover.

REGULATORY INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Hereby, Control Company, declares that this digital

thermometer is in compliance with the essential

requirements and other relevant provisions of Directive

1999/5/EC.

This device complies with Industry Canada licence-

exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause

interference, and (2) this device must accept any

interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie

Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions

suivantes : (1) l’appareil ne doit pas produire de

brouillage, et (2) l’utilisateur de l’appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

NOTE: THE GRANTEE IS NOT RESPONSIBLE

FORANY CHANGES OR MODIFICATIONS

NOT EXPRESSLYAPPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE. SUCH

MODIFICATIONS COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

www. .com information@itm.com1.800.561.8187

TraceableLIVE

WiFi

DATALOGGING

CO2METER

WITH REMOTE

NOTIFICATION

INSTRUCTIONS

NOTE: The device date/time is automatically

synchronized to the mobile phone or laptop once the

setup webpage is shown.

NOTE: Make sure Network ID and password are correct;

otherwise the device will wait to connect to the router

until timeout, and then “Err” is shown on LCD.

CONFIGURE WiFi NETWORK: WPS PROVISIONING

• Press WiFi button to enable WiFi function. If it is rst

time enabled, WiFi symbol ashes.

• Press and hold WiFi button for 3s till the device

displays “AP”;

• Press UP or DOWN button to scroll to WPS. “UPS” is

displayed on LCD.

• Press and release WiFi button, the device displays

“AP UAIT”.

• Wait until LCD displays “UPS rEAdy” (WPS ready).

• Press WPS button on the router that the device

is intended to connect to. Please refer to router’s

manual for WPS function.

• If network is congured successfully, the device

reboots, and ready to use.

NOTE: The router has to support WPS, and WPS

function has to be enabled. The device supports only

PUSH BUTTON Method. Pin Code Method is NOT

supported.

NOTE: Using WPS provisioning will not update the

device’s date/time.

HOW TO CONFIGURE WiFi NETWORK:

SMARTCONFIG PROVISIONING

• Press WiFi button to enable WiFi function. If it is rst

time enabled, WiFi symbol ashes;

• Press and hold WiFi button for 3s till the device

displays “AP”;

• Press UP or DOWN button to scroll to SmartCong.

“SnArT” is displayed on LCD;

• Press and release WiFi button, the device displays

“AP UAIT”;

• Wait till LCD displays “SnArT rEAdy” (SMART ready);

• On TI’s WiFi Starter App, enter Network ID and

password, and press Start button.

• If network is congured successfully, the device

reboots, and ready to use.

NOTE: this method requires user to install TI WiFi

Starter app for iOS orAndroid on mobile devices.

NOTE: Using SmartCong provisioning will not update

the device’s date/time.

DATAMEMORY

1. Device is capable of storing 7 days of data if 15

minute logging interval is set.

2. If data transmission fails, data will be stored in data

memory. Stored data will be transmitted automatically

WARRANTY, SERVICE, OR RECALIBRATION

For warranty, service, or recalibration, contact:

Control Company is ISO 9001:2008 Quality-Certi-

ied by DNV and ISO/IEC 17025:2005 accredited

as a Calibration Laboratory by A2LA.

Control Company Cat. No. 6525 / 6526

Traceable®and TraceableLIVE® are registered trademarks

of Control Company.

on next successful transmission.

3. If WiFi network has been congured, and WiFi

connection is lost, data will be stored in data memory

at user-dened logging interval.

4. If WiFi network has not been congured, data will not

be stored in data memory.

5. Stored data in data memory cannot be cleared by

user. It can only be cleared by a successful data

transmission.

ALARM REPOST

• If an alarm triggers and stays in triggered condition,

after a user-dened period, the device will

repost alarm to cloud server even if a user has

acknowledged the alarm.

• Alarm Repost feature is disabled by default, to enable

see DEVICE SETUP.

• Alarm Repost period is set to 60 min by default, a

user can change the interval between 5 minutes to 8

hours (5 minute increments).

DISPLAY MESSAGES

If no buttons are pressed and - - -.- - appears on the

display, this indicates that the temperature being mea-

sured is outside of the temperature range of the unit, or

that the probe is disconnected or damaged.

BENCH STAND

The unit is supplied with a bench stand located on the

back. To use the bench stand, locate the small opening

at the bottom back of the unit. Place your ngernail into

the opening and ip the stand out. To close the stand,

simply snap it shut.

LOW BATTERY POWER INDICATOR

Unit is supplied with 4 AAA alkaline batteries. If the bat-

tery power drops to 20% or lower a low battery symbol

will appear on device display, and an alert will be

sent via TraceableLIVE.

ALL OPERATIONAL DIFFICULTIES

If this thermometer does not function properly for any

reason, please replace the battery with a new high-quality

battery (see “Battery Replacement” section). Low battery

power can occasionally cause any number of “apparent”

operational difculties. Replacing the battery with a new

fresh battery will solve most difculties. If the voltage of

the battery becomes low °C and °F symbols will ash.

BATTERY REPLACEMENT

Erratic readings, a faint display, or no display are all

indications that the battery must be replaced. Slide the

battery cover toward the end of the unit. Remove the

exhausted battery and replace with AAA alkaline battery.

Replace the battery cover.

REGULATORY INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Hereby, Control Company, declares that this digital

thermometer is in compliance with the essential

requirements and other relevant provisions of Directive

1999/5/EC.

This device complies with Industry Canada licence-

exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause

interference, and (2) this device must accept any

interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie

Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions

suivantes : (1) l’appareil ne doit pas produire de

brouillage, et (2) l’utilisateur de l’appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

NOTE: THE GRANTEE IS NOT RESPONSIBLE

FORANY CHANGES OR MODIFICATIONS

NOT EXPRESSLYAPPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE. SUCH

MODIFICATIONS COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

www. .com information@itm.com1.800.561.8187

Ce manuel convient aux modèles suivants

Autres manuels Itm Enregistreur de données

Itm

Itm Hanna Instruments HI144 T-Logger Manuel utilisateur

Manuels Enregistreur de données populaires d'autres marques

TESTO

TESTO 176 Manuel utilisateur

HT Italia

HT Italia XL421 Manuel utilisateur

HBM

HBM SOMAT XR CX22B-R Manuel utilisateur

Agtrix

Agtrix 380i Manuel utilisateur

Hobo

Hobo H8 Pro Manuel utilisateur

Beijing ART Tech

Beijing ART Tech PCI2320 Manuel utilisateur

Athena

Athena GET SL1 Manuel utilisateur

Motec Systems

Motec Systems C185 Manuel utilisateur

Beijing ART Tech

Beijing ART Tech USB2832 Manuel utilisateur

Rotronic

Rotronic HygroLog HL20 Manuel utilisateur

MRC

MRC DW-6092 Manuel utilisateur

Racelogic

Racelogic VBOX LapTimer Manuel utilisateur

Edu-Logger

Edu-Logger 900-240 Manuel utilisateur

Elma

Elma DT173 Manuel utilisateur

MadgeTech

MadgeTech PRTemp140 Fiche technique

Comet

Comet U0121M Manuel utilisateur

pico Technology

pico Technology PT-104 Manuel utilisateur

Soil Instruments

Soil Instruments GTecLink Manuel utilisateur