IL-EMZ Service Manual i
IMPORTANT NOTICE
This manual explains the procedures to perform installation, operation, service, or maintenance of the
machine.
Those who handle the machine must be aware of the hazards involved. These dangers may not be obvious,
so it is imperative to follow the instructions detailed in this manual when installing, operating, inspecting, or
servicing the machine. Therefore, we recommend that you thoroughly read and understand this manual
before installing, operating, inspecting, or servicing the machine, and keep this manual in a safe place
where you can refer to it whenever necessary.
ISHIDA is not liable for any damage, loss or injury that results from incorrect operation, insufficient caution,
unauthorized modifications to the machine, or failure to follow the instructions contained in this manual.
In the recent weighing industry, the latent hazards involved with handling the machine have increased due
to new materials, new processing methods, and higher processing speeds, and it is impossible to predict all
of the possible dangers.
Likewise, there are far too many operations which cannot or should not be performed to fully describe all of
them in the manual. Please assume that any handling or operation not specifically described in this manual
should never be performed.
Safety countermeasures should be carefully considered and implemented before performing any
installation, operation, inspection, or maintenance procedure not specifically described in this manual or
indicated on the machine itself.
CHANGE IN SPECIFICATIONS
Machine specifications and accessories may be changed at any time due to improvements or other
reasons. Consult with your ISHIDArepresentative at any time to confirm the actual specifications of the
purchased machine.
ERRORS AND OMISSIONS
The information in this manual has been carefully checked and is believed to be accurate. However, please
understand that the descriptions in this manual may not agree with the actual machine due to machine
improvements. The information is subject to change without prior notice in the future. ISHIDA assumes no
responsibility for clerical, typographical or proofreading errors, or omissions.
LIMITATIONS OF LIABILITY
ISHIDA assumes no responsibility for special, indirect, or consequential damages, loss of profits or
commercial loss in any way connected with the machine, whether such claim is based on contract, warranty,
negligence, or strict liability.
ISHIDA shall assume responsibility for problems with the machine or the system based on an individual
maintenance contract. However, ISHIDA shall not be responsible for secondary problems.
ISHIDAassumes no responsibility for the user's programming of this machine, or any consequence thereof.
In no event shall ISHIDA be responsible for warranty, repair, or other claims regarding the machine unless
ISHIDA’s analysis confirms that the machines were properly handled, stored, installed, and maintained and
not subject to contamination, abuse, misuse, or inappropriate modification or repair.
