Page 3 of 4
Operation
Preparation
Before use, rinse with a mixture of warm water and one teaspoon of baking soda.
Check that the shower head is closed and fill with clean water through the fill cap at the top of the bag.
Place the shower on a Solid Level surface exposed to direct sunlight.
In approximately 2 to 3 hours, you should be ready to take a relaxing hot shower.
Alternatively fill the shower with pre heated water, ensuring that the temperature does not exceed +52
degrees Celsius.
Shower Instructions
1. Ensure the fill cap is firmly in place.
2. Place the shower on a level and solid
surface free from debris.
3. Lay the shower on its side and connect the
Hoses for the Foot Pump and Shower Head and
then return to the upright position (Fig. 1 and
Fig. 2).
4. Open the 1st Stage of the valve on the foot
pump – this will allow the pump to draw air in
when depressed (Fig. 3).
5. Push down on the pump until you feel
pressure building in the shower – DO NOT
OVER PRESSURISE THE SHOWER
6. Test the water to ensure the temperature is
not too hot.
7. Use the trigger at the end of the hose to
adjust the water flow.
Solar Shower Tips
Solar Showers get very hot, make sure you check
the temperature of the water before you have a
shower.
Solar Showers can provide all your hot water
needs when camping. Dishes, showers and
washing, etc.
Not designed for potable water.
Fig 1.
Fig 3.
Fig 2.
