iPuray BRT-111 Manuel utilisateur
Product Description of BRT-111 Page 1of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Glass Touch Screen Timer Switch
Model #：BRT-111
Features:
BRT-111 is a glass touch screen timer switch which is controlled by a micro controller unit and has
timing capability for four separate loads. It is designed for easy installation and retrofit, directly fit
into standard wall box where both the “hot” wire and the neutral wire are present.
High quality glass as faceplate, luxury and elegant;
Control over up to 4 loads. Each load can have a delay-off time of 30 seconds or instant
on/off;
Easy to use. A gentle touch will turn on or turn off the load;
Good for all kinds of loads (resistive, inductive, or capacitive);
Can be used as night light. All the buttons are always lit by blue backlights, so they are easy
to find even in the dark;
Costume color and pattern available;
ABS-V0 flame resistance material; and
Classical 86 series design and high quality build.
Front View and Back View:
Fig. 1 and Fig. 2 show the front view and the back view of the BRT-111 glass touch screen timer
switches respectively.
Fig. 1 Front View Fig. 2 Back View
Product Description of BRT-111 Page 2of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
There are four on/off buttons and one Off button on the front, and there are wiring terminal blocks
on the back. The buttons are backlit with blue light.
Specification Parameters:
Input Voltage
180～250V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH，
-15℃～55℃
Wattage
Resistive: 500W/Load
Inductive: 250W/Load
Capacitive: 250W/Load
Load type
All Types
Mounting Hole
Spacing
60mm
Matching
Box
75mm x 75mm x 50mm
Dimension
86mm x 86mm x 36mm
Weight
165g
Wiring Diagram and Installation Guide:
BRT-111 glass touch screen timer switch requires both hot wire and neutral wire for installation:
Hot wire (ACL): Coming from the power line with 220V;
Neutral wire (ACN): Usually coming with the hot wire; and
Load wire: Going to the load.
Fig. 3 BRT-111 Wiring Diagram
Warning: Please make sure power is turned off before starting installation!
Fig. 3 shows the wiring diagram and Fig. 4 shows the step-by-step installation instructions. There
are three easy steps:
Product Description of BRT-111 Page 3of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Step one: Use a screwdriver to pry off the front plate in position A;
Step two: Wiring according to the diagram and the labelled ports of the switch; and
Step three: Install the switch to the wall box using screws and put back the front plate.
Fig. 4 BRT-111 Installation Guide
BRT-111 Operation Guide:
Switch on/off the load: After BRT-111 is powered on, touching each of the 4 on/off buttons
will turn on or turn off the loads respectively, when the delay-off function is not setup.
Touching the Off button will turn off all the loads in the same time.
When a load is turned on, the corresponding button will become brighter in blue.
Set up delay-off function: Use a screwdriver to pry off the front plate to access the dip
switches as shown in Fig.5. Switching the dip switch to on will set up each on/off button for
delay-off operation respectively.
The delay-off time is set at 30 seconds at factory. Please talk to our sales representative if
other customized settings are required.
Product Description of BRT-111 Page 4of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Fig. 5 Dip Switches for Activating Delay-off Time
Activate delay-off function: Once the delay-off function is set up, touching the on/off
button once will turn on the load, and touching the on/off button the second time will trigger
delay-off for the load. The blue LED indicator will blink until the load is automatically
turned off after 30 seconds.
During the delay-off time countdown, touching the On/Off button will turn off the load
immediately.
Applications:
BRT-111 glass touch screen timer switch can be used for automatically turning on and/or turning
off various loads such as fans, lights, appliances, or other kinds of electrical equipment. They are
perfect for saving energy and bringing convenience and safety to our daily life and work.
They have wide applications at various locations such as homes, hotels, schools, laboratories,
hospitals, offices, etc.
How to Order:
Please contact us: Shenzhen Asia Bright Industry Co., Ltd
Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China
Tel: +86-755-89748200 +86-755-89748211
Fax: +86-755-89748778 +86-755-89748226
Email: sales@a-brt.com Website: www.a-brt.com
Table des matières
Autres manuels iPuray Changer
iPuray
iPuray BRT-603 Manuel utilisateur
iPuray
iPuray BRT-701 Manuel utilisateur
iPuray
iPuray BRT-108 Manuel utilisateur
iPuray
iPuray BRT-115 Manuel utilisateur
iPuray
iPuray BRT-782 Manuel utilisateur
iPuray
iPuray BRT-611 Manuel utilisateur
iPuray
iPuray BRT-704 Manuel utilisateur
iPuray
iPuray BRT-F013-T Manuel utilisateur
iPuray
iPuray BRT-607 Manuel utilisateur
iPuray
iPuray BRT-110 Manuel utilisateur
iPuray
iPuray BRT-109 Manuel utilisateur
iPuray
iPuray BRT-604 Manuel utilisateur
iPuray
iPuray BRT-320 Manuel utilisateur
iPuray
iPuray BRT-408 Caractéristiques techniques
iPuray
iPuray BRT-304C Manuel utilisateur
iPuray
iPuray BRT-106 Manuel utilisateur
iPuray
iPuray BRT-784 Manuel utilisateur
iPuray
iPuray BRT-112 Manuel utilisateur
iPuray
iPuray BRT-319 Manuel utilisateur
iPuray
iPuray BRT-707 Manuel utilisateur
