ipDatatel BAT-CDMA-WIFI Manuel utilisateur
Rev. 1.1
Technical Support Information
For Technical Support, Toll-Free: 866-896-1818
M-F 8:00am - 6:30pm CST
Email: [email protected]
Web: www.ipdatatel.com
ipDatatel, LLC
13110 Southwest Freeway
Sugar Land, TX 77478
Please visit our website for instructional videos.
About ipDatatel
At ipDatatel, LLC, we are dedicated to serving our dealers with quality
products and support services.
ipDatatel engineers and manufactures innovative security and
automation devices for the alarm industry. As a leader in the design
and development of Cellular and IP connected products, we offer:
•
Proprietary alarm signaling network with no single point of failure;
• No additional central station equipment needed;
• Verizon Cellular Network ready;
• Encrypted IP alarm transmissions; and
• Dealer support and training.
Revision Notes
Rev Notes Date
Initial Release 1/13/2015
1.1 Updated Wi-Fi Joining Process 3/8/2015
Dual-Path Alarm Communicator - Installation Guide...............................................Page 2
Quick Reference
See Supported Panels section page 26-27
DSC:
See page 14 for details
Programming for TELCO use on DSC:
Section Universal Wi-Fi BAT as Sole Communicator
301 Enter Phone Number
310 Enter Account Number
350 Enter ‘03’ for Contact
HONEYWELL / VISTA:
See page 18 for details
Programming for TELCO use on Vista:
Section Universal Wi-Fi BAT as Sole Communicator
41 Enter Phone Number
43 Enter Account Number
193 Enter 1, 0. Enable to turn on Address 20
GE NETWORX:
See page 21 for details
Programming for TELCO use on GE NetworX:
Section Device 0 Universal Wi-Fi BAT as Sole Communicator
Location 0 Enter the Phone Number
Location 1 Enter Account Number
Location 2 Enter ‘13’ for Contact ID
Dual-Path Alarm Communicator - Installation Guide...............................................Page 3
Table of Contents
Revision Notes.......................................................................... 2
Introduction............................................................................... 5
Product Key Features .............................................................. 5
Installation Guide ..................................................................... 7
General Considerations........................................................... 7
Wi-Fi Service Provisioning...................................................... 7
AP Configuration Tool QuickStart Guide.................................. 7
Connecting to a Wireless Network (AP Configuration)............ 7
Connecting to a Wireless Network (WPS)............................... 8
Reset the Wireless Network (AP Configuration Tool).............. 8
CDMA Service Provisioning .................................................... 9
Board Button Configuration.................................................... 10
Pre-Installation.......................................................................... 10
Troubleshooting Diagnostic Information.................................. 13
Validating the Installation......................................................... 13
Wiring & Programming for Popular Panels............................ 13
DSC Panel Wiring and Programming...................................... 14
Vista Panel Wiring and Programming...................................... 18
GE Panel Wiring and Programming ........................................ 21
Generic Alarm Panel Wiring and Programming....................... 23
Generic Key Switch Wiring and Programming ........................ 24
Supported Panels.................................................................... 26
Limited Warranty Information ................................................. 28
FCC and Industry Canada Regulatory Compliance .............. 29
Specifications........................................................................... 31
Dual-Path Alarm Communicator - Installation Guide...............................................Page 4
Introduction
ipDatatel’s Universal Cellular and Wi-Fi Broadband Alarm Transceiver
(BAT-CDMA-WIFI) is a multi-path wireless Cellular and Internet alarm
communicator. The BAT-CDMA-WIFI uses Verizon CDMA which has
the greatest nationwide coverage.
The BAT-CDMA-WIFI is compatible with most alarm control panels that
transmit Contact ID (CID) format from its digital dialer. The BAT-CDMA-
WIFI also connects to the Keypad Bus of compatible (Honeywell,
DSC and GE) alarm control panels to provide additional interactive
services.
The end user has virtual keypad access via Smartphone and the web,
as well as alarm monitoring notifications via push/text, email, and
computerized voice call.
ipDatatel’s proprietary uDownloader software enables remote manage-
ment of Honeywell and DSC alarm panels that are connected to the
BAT-CDMA-WIFI.
Product Key Features
• Cellular (Verizon CDMA) and Wi-Fi Communicator
The BAT-CDMA-WIFI replaces outdated conventional phone lines to
provide high-speed IP alarm monitoring transmissions over the Internet
(via Customer’s Wireless Router/Swtich through Wi-Fi) and provides a
cellular backup form of communication if the event the Internet is down
or line is cut.
• Remote Universal Downloader
ipDatatel’s Universal Downloader software, uDownloader, enables
remote management of alarm panels that are connected to ipDatatel’s
BAT products via the Internet uDownloader software. uDowloader
currently supports Honeywell Compass and DSC DLS 5. ipDatatel’s
uDownloader software is available for download at www.alarmdealer.
com in the Dealer Resources section.
Dual-Path Alarm Communicator - Installation Guide...............................................Page 5
• Virtual Keypad Access
Your customers can operate their security system using ipDatatel’s
SecureSmartTM app via their Smartphone. SecureSmartTM is compatible
with iPhone and Android platforms. The free App is available at the
iTunesApp Store or the Google Play Store (search for “SecureSmart”).
The virtual keypad is also available as a web application on www.
alarmdealer.com that runs from any Internet connected browser that
supports flash.
• Alarm Notifications via Text/Push and Email
The BAT-CDMA-WIFI provides notifications for alarm, supervisory,
trouble, open/close, and test signals. Notifications by text/push and
email are configurable to identify the alarm system address, alarm
signal and zone, and description.
• Computerized Voice Alarm Notifications
ipDatatel also provides an exclusive feature of notifications via
computerized voice call for customers who may not want text or email
messages.
Dual-Path Alarm Communicator - Installation Guide...............................................Page 6
Installation Guide
General Considerations
• Before installation, your BAT-CDMA-WIFI must also be setup
using the ‘dealer branded’ portal www.alarmdealer.com.
• The BAT-CDMA-WIFI should be installed securely in the supplied
plastic enclosure, and be mounted adjacent to your alarm control
panel.
• Choose a location with good reception by monitoring the
BAT-CDMA-WIFI signal strength LEDs with temporary wiring
for a power-up.
• The BAT-CDMA-WIFI must be completely powered down before
making other wiring terminations to panel.
• Programming is simple using the alarm control panel. Written
instructions are included in the “Wiring & Programming” section of
this manual starting on page 13.
Wi-Fi Service Provisioning for AP & WPS
AP (Access Point) Configuration Tool QuickStart Guide
A QuickStart Guide has been designed to make the BAT-CDMA-WIFI
easily join the customer’s Wi-Fi Network. This guide can be found at:
www.ipdatatel.com/support.php .
Connecting to a Wireless Network (AP Configuration)
The BAT-CDMA-WIFI has an AP Configuration Tool which is designed
to assist joining the wireless network to the BAT-CDMA-WIFI.
The following steps should be followed:
1. Connect the BAT-CDMA-WIFI at the alarm panel.
2. Open your Smartphone or laptop and search for Wireless
Connections.
3. In the list of Wi-Fi connections you should see one labeled:
IPD-CFG-AP-XX-XX-XX. The last six digits will match the
MAC address of your Wi-Fi device. If not, try moving your BAT-
CDMA-WIFI to a different location for better reception.
4. Connect to the Wi-Fi Network: IPD CFG-AP-XX-XX-XX.
5. After you are connected to your Smartphone or laptop, open
a web browser and type in the following IP Address:
192.168.100.1
Dual-Path Alarm Communicator - Installation Guide...............................................Page 7
6. When you connect to the above IP Address it will launch the
AP Configuration Tool.
7. Click on “Scan for Wireless Networks”. The list will
populate with all available wireless networks in your area.
8. Find the customers Wireless Network and select it. If security
credentials are required, you will be prompted to enter them.
9. You should now be connected to the customers Wi-Fi
Network.
Connecting to a Wireless Network (WPS)
Press the SW1 button (located on the top left side of the board) once,
it should trigger the device to enter into WPS mode. LED 6 will blink
as long as the device is in WPS mode. Follow the router’s directions
to turn WPS on. Typically, enabling WPS involves simply pressing a
button labeled ‘WPS’ on the customer’s router or switch. Once the
Wi-Fi device and the router recognize each other, LED 6 will go solid
indicating it has connected. You can now press the SW1 button twice to
indicate the signal strength of the device.
Reset the Wireless Network (AP Configuration Tool)
Locate the button labeled SW1 on the top left of the board. When this
button is pressed 3 times, it causes the device to perform a software
reset and will allow you to perform the ‘AP Configuration Tool’ again.
Dual-Path Alarm Communicator - Installation Guide...............................................Page 8
Cellular CDMA Service Provisioning
Overview
The BAT-CDMA-WIFI device is “Pre-Provisioned” with Verizon Cellular
to be active once installed. If you deactivate the device, you will need
to re-provision the device.
When re-provisioning, it is necessary to register the device with Verizon
Cellular where an ‘Over The Air Service Provisioning’ (OTASP) is
performed. During an OTASP the CDMAmodule obtains an IP address
with the nearest cell tower and provides IP connectivity to the BAT-
CDMA-WIFI.
Resolution
The following steps will re-provision the BAT-CDMA-WIFI with the
Verizon network.
Service Provisioning Steps:
1. To begin, ensure, that the device is powered by 12 VDC either
from a battery or the alarm control.
2. Press and release the SW1 switch 3 times (i.e. triple click the
switch)
3. Once released, the device will auto power cycle. When it
reinitializes you should see LEDs 3 – 6 scrolling
4. Onceacquiredintothenetwork,youwillseethesignalstrength
indicated on the board via LEDs 3 – 6.
5. Wait approximately 5 minutes before sending signals.
Dual-Path Alarm Communicator - Installation Guide...............................................Page 9
Board Button Configuration
SW1 Button [located on the top left of the board]
There are several uses of the SW1 button on the device. Follow
the instructions below when ‘Tapping’ SW1 for the following various
features:
1 Tap - Device will go into WPS mode and should search for nearest
WPS activated Wi-Fi router in the area.
2 Taps – Device will indicate Wi-Fi signal strength [Device must be
paired to a Wi-Fi]
3 Taps – CDMA Module Service Provisioning (OTAP)
4 Taps – Device will force a firmware upgrade [Device must be paired
to a Wi-Fi router]
5 Taps - Device will factory reset and lose connection to any Wi-Fi it
was previously attached to.
Should any pairing issues occur, press the SW1 button 5 times to
factory reset and start the pairing process over.
Pre-Installation
Hardware Registration
Before installation of your BAT-CDMA-WIFI, it must be registered at
www.alarmdealer.com.
Here are the steps needed to register your hardware:
• Log in to www.alarmdealer.com with the dealer login information
that was emailed upon your initial company registration.
• Navigate to ‘Dealer Menu’->’Hardware Registration.’
• Enter the MAC address for the device you wish to register.
Adding the BAT-CDMA-WIFI to a Customer Account
After registering the hardware, the BAT-CDMA-WIFI must be added to
a Customer Account by following these steps:
• Log in to www.alarmdealer.com with the dealer login information
Dual-Path Alarm Communicator - Installation Guide...............................................Page 10
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ipDatatel Émetteur-récepteur
