Iomega 1562 Manuel utilisateur

Technical Support is available at 1-888-4-IOMEGA (1-888-446-6342) and at

www.iomega.com/support/nav_techemail.html

of Iomega Corporation. Other product, company names and logos are trademarks or registered trademarks of their respective owners.

Part Number: 000001562

DataSafe NAS

Table of Contents

About This Guide- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i

Who Should Use This Guide- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i

Box Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i

Overview- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i

System Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ii

Typographical Conventions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ii

Related Documents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ii

1 Pre-Installation Planning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1

Equipment Required for Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1

Site Planning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1

Familiarizing Yourself with Your DataSafe NAS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

2 Installing the DataSafe NAS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Connect DataSafe NAS to Your Network- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Turning on the Power - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4

Installing DataSafe Wizard Software - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5

Completing DataSafe Wizard Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

3 Configuring Your DataSafe NAS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9

First Login- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9

Network Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

Setting Time & Date - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13

Notes for Advanced Users - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15

System Reboot - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15

Index- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17

About This Guide i

About This Guide

Who Should Use This Guide

This DataSafeTM NAS Installation and Configuration Guide is intended to help setup and configure

DataSafe NAS. It assumes that you are somewhat familiar with networking and system

administration basics. Should you encounter any difficulties during the installation and

configuration process outlined in this guide, please refer to the DataSafe NAS User’s Manual also

found on the DataSafe NAS CD.

Box Contents

nDataSafe NAS file server

nQuick Install Guide

nDataSafe NAS End User License Agreement

nPower Cord

nCAT-5 Ethernet Cables (2)

nMounting ears (pre-installed)

nRubber feet (4)

nDataSafe NAS CD containing:

•DataSafe Wizard for Setup and Discovery

•DataSafe NAS documentation

nIomega QuikSyncTM automatic client backup software CD

Overview

Your DataSafe NAS comes ready to install with all the required software. It works in a 10/100 Mbps

Ethernet network (or Gigabit Ethernet network when so equipped), and is administered using an

Internet Explorer web browser. It includes DataSafe Wizard, Iomega’s software utility that helps you

locate the unit on your network, configure DataSafe NAS network settings, and launch the web user

interface.

About This Guide ii

DataSafe NAS

System Information

Please record the following information from the label on the side panel:

nModel Number: __________________________________________

nSerial Number: ___________________________________________

nAssembly Number: ________________________________________

These numbers will be needed by support personnel if you should contact them.

Typographical Conventions

The following typographical conventions are used in this guide to help you locate and identify

information:

Related Documents

Following is a list of related publications for background and additional information:

nDataSafe NAS User’s Manual

nQuick Install Guide

nDataSafe NAS End User License Agreement (EULA)

nWarranty Statement

nAlso see our Web site at: http://www.iomega.com for latest Release Notes.

Table 1-1. Typographical Conventions

Item Symbol Description

Italic text is used for emphasis and book titles.

Bold text identifies menu names, menu options, items you can click on the

screen, and keyboard keys.

Courier

font identifies file names, folder names, and text that either appears on

the screen or that you are required to type in.

NOTE: Notes provide extra information, tips, and hints regarding the

topic.

CAUTION:

Cautions identify important information about actions that could

result in damage to or loss of data or could cause the system to

behave in unexpected ways.

WARNING:

Warnings identify critical information about actions that could

result in unexpected equipment failure, loss of critical operating

system files or potential bodily injury.

Pre-Installation Planning 1

1 Pre-Installation Planning

Equipment Required for Installation

To connect, install and administer your DataSafe NAS, you will need an available 10/100 Ethernet

network hub or switch. It will be necessary for your workstation to have the following capabilities:

•Windows 95/98/Me/NT (SP5)/2000

•Internet Explorer v4.01 SP1 or newer - support for Netscape is not currently available.

•Client for Microsoft Networks enabled over TCP/IP.

•Network Interface Card (NIC)

•CD-ROM Drive

Site Planning

When planning a site to house your DataSafe NAS, you will want to consider requirements for power

and network availability, as well as a space with well regulated temperature and humidity that is

relatively free of dust and other air-born contaminants. If your installation calls for placement on a

table top, apply the enclosed rubber feet to the bottom of the chassis.

The following tables are designed to help you plan your DataSafe NAS installation.

CAUTION: When placing your DataSafe NAS in rack mount mode, make sure you

maintain proper mechanical load leveling to avoid a hazardous condition.

Table 1-1. Size & Weight

Item Quantity

Weight 27 pounds (12.3 kg)

Size 17 x 20 x 1.75 (43.2 x 50.8 x 4.5 cm)

Pre-Installation Planning 2

Iomega DataSafe NAS

Table 1-2. Electrical Requirements

WARNING Make sure your site has the necessary capacity to handle your DataSafe

NAS unit(s). Overloading electrical supply circuits is extremely hazard-

ous. Care should also be taken to properly ground all rack mounted

equipment.

CAUTION: When mounting your DataSafe NAS in a rack system, make sure that the air

vents do not become blocked. Also, care must be taken to insure that

DataSafe NAS is installed in an environment compatible with the ambient

temperatures stated in the table above. Maximum of 40ºC.

Item Quantity

Voltage Range 95 ~ 135 VAC or 180 ~ 265 VAC

Frequency 47 ~ 63 Hz

Table 1-3. Operating Environment Requirements

Item Quantity

Temperature - Operating

Temperature - Non-Operating

41ºto 104ºF (5ºC to 40ºC)

external operating temperature range

-4ºto 140ºF (-20ºC to +60ºC)

Humidity - Operating

Humidity - Non-Operating

5% to 85% humidity non-condensing

5% to 95% humidity non-condensing

Pre-Installation Planning 3

Iomega DataSafe NAS

Familiarizing Yourself with Your DataSafe NAS

Front Panel

TheDataSafeNASfront panelhas fourLEDs. Threeare groupedtogether onthe rightside, oneon the

left. The LEDs indicate the following:

•Far left LED (soft power switch). Solid LED indicates power on. This LED will blink during

boot-up, and will also blink to indicate error conditions (See DataSafe NAS User’s Manual for

alert codes).

•Network Link 1 for LAN 1. Flashing indicates network activity.

•Network Link 2 for LAN 2. Flashing indicates network activity.

•Hard disk drive LED indicates read/write activity.

Figure 1-1. LEDs

Back Panel

Each Ethernet Port has two LEDs. One indicates link and the other activity.

NOTE: On units with a Gigabit Ethernet option installed, additional LEDs will be present.

Figure 1-2. NIC connections, Back Panel

SOFT POWER SWITCH HARD DISK

LAN 1

DRIVE

LAN 2

CONNECTIONS

POWER

FOR Field Service Personnel ONLY

SCSI

PORT

Gigabit

Option

(BACK PANEL)

CONNECTION FAN CONNECTION

UPS LAN 1

LAN 2

Installing the DataSafe NAS 4

2 Installing the DataSafe NAS

Connect DataSafe NAS to Your Network

To connect the DataSafe NAS to your network, insert one of the included Ethernet cables into either

DataSafe NAS 10/100 Ethernet port (LAN1 or LAN2), located on the rear panel. Insert the other end of

this cable into network hub or switch. If your DataSafe NAS is equipped with a Gigabit Ethernet

option, you may connect it to a 10/100/1000 network hub or switch, using a CAT-6 cable (not

supplied).

Figure 2-1.

NOTE: The two 10/100 Ethernet ports found on DataSafe NAS are pre-configured to provide

load balancing and fail-over capability. Although not necessary for a successful

installation, this feature does enhance system performance, and allows for

redundancy in the event of a cable or component failure.To use this function, connect

the second included Ethernet cable to your DataSafe NAS and the other end to

another open port on your network hub or switch. Load balancing and fail-over will

automatically be enabled with no special configuration required for your switch.

Turning on the Power

1Connect one end of the enclosed power cord to a power source. Plug the other end into the power

receptacle on the back panel shown in Figure 2-1 below.

Figure 2-2. Power Receptacle and Main Power Switch, Back Panel

LAN 1

LAN 2

MAIN POWER SWITCH

(BACK PANEL) POWER RECEPTACLE

5Installing the DataSafe NAS

Iomega DataSafe NAS

2Toggle the main power switch on the back panel to the “ON” position ( I ).

3Press the soft power switch on the front panel (shown below), to turn on the unit.

Figure 2-3. Soft Power Switch, Front Panel

The LED in the power switch will come on. After a few moments it will begin blinking, and continue to

blink for several minutes during the power-up cycle. When the power light stops blinking and disk

activity stops, your DataSafe NAS is ready to configure.

Installing DataSafe Wizard Software

Use a workstation that is logged onto the network where the DataSafe NAS unit is connected. Insert

the DataSafe NAS Installation and Documentation CD into your CD-ROM drive. If the “Welcome to the

DataSafe NAS” screen does not appear, the auto-insert notification for the CD has been turned off. In

this case, use Windows Explorer to launch the setup program from the CD.

Click on DataSafe Wizard for Setup & Discovery to begin your installation.

DataSafe Wizard

When the Install DataSafe NAS Family

screen appears, click the Install DataSafe

Wizard button. The wizard will guide you

through the installation process.

If you have an older version of DataSafe

Wizard on your server, you will be notified

andaskedifyou wanttoun-installthe older

version, before your newer version is

installed.

SOFT POWER SWITCH

(FRONT PANEL)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Iomega Serveur de stockage réseau

Iomega

Iomega 33244 - NAS 200d/750GB With Print Server Manuel utilisateur

Iomega

Iomega 34340 - StorCenter Pro ix4-100 NAS Server Manuel utilisateur

Iomega

Iomega StorCenter ix4-200d Manuel utilisateur

Iomega

Iomega 33784 - Gigabit Ethernet 1HD X 500GB StorCenter Network... Manuel utilisateur

Iomega

Iomega 33469 - StorCenter Pro NAS 450r Server 1TB WSS 2003 R2... Manuel utilisateur

Iomega

Iomega 34571 - Home Media 2 TB Network Attached... Manuel utilisateur

Iomega

Iomega 33271 - StorCenter Network Hard Drive Manuel utilisateur

Iomega

Iomega 34208 - Storcenter Pro 200RL Nas 3TB 4X750GB Sata II Raid 0/0+1/5... Manuel utilisateur

Iomega

Iomega 33459 - StorCenter Pro NAS 250d/500GB Server Manuel utilisateur

Iomega

Iomega 33610 - 1TB StorCenter Pro NAS 150d Server Manuel utilisateur

Iomega

Iomega 33252 - NAS 300R SERIES 500GB Manuel utilisateur

Iomega

Iomega Ix2-200 - StorCenter Network Storage NAS... Manuel utilisateur

Iomega

Iomega StorCenter px6-300d Manuel utilisateur

Iomega

Iomega P400u - 32371 NAS 7200 RPM 160 GB Server Manuel utilisateur

Iomega

Iomega 100D Manuel utilisateur

Iomega

Iomega 33451 - StorCenter Pro NAS 400r/2TB Server Manuel utilisateur

Iomega

Iomega StorCenter ix4-200d Manuel utilisateur

Manuels Serveur de stockage réseau populaires d'autres marques

HP NetStorage 6000 Manuel utilisateur

Seagate

Seagate U10 ST320423A Manuel utilisateur

Synology

Synology RackStation RS816 Manuel

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manuel utilisateur

Avid Technology

Avid Technology VideoRAID ST Guide de sécurité

Western Digital

Western Digital My Cloud Home Duo Manuel utilisateur

PrimeArray

PrimeArray 4xxx Manuel utilisateur

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manuel utilisateur

Planex

Planex MZK-NAS01SG Manuel utilisateur

Intel

Intel SS4000-E - Entry Storage System NAS Server Manuel utilisateur

Synology

Synology RS2212+ Manuel utilisateur

Allnet

Allnet ALL69000 Manuel utilisateur

Adaptec

Adaptec 5325301580 Manuel utilisateur

Motorola

Motorola EXORdisk II Manuel utilisateur

Sony

Sony XDAAI1PK Manuel utilisateur

Cisco

Cisco Linksys NAS200 Instructions d'utilisation d'origine

Sans Digital

Sans Digital MR4UT6G Manuel utilisateur

AIC

AIC FB128-LX Manuel utilisateur