INVENTOR M3GHP290-12 Manuel utilisateur

Ce manuel convient aux modèles suivants

1

Table des matières

Langues :

Autres manuels INVENTOR Télécommande

INVENTOR

INVENTOR P9MVI32-12WiFi Manuel utilisateur

INVENTOR

INVENTOR RG57A2/BGEF Manuel utilisateur

INVENTOR

INVENTOR EPC-09 Manuel utilisateur

INVENTOR

INVENTOR M2GHP290-12 Manuel utilisateur

INVENTOR

INVENTOR V4MRFI-24 Manuel utilisateur

INVENTOR

INVENTOR LV4MCI-12UR Manuel utilisateur

INVENTOR

INVENTOR CR2VI-18WFIB Manuel utilisateur

INVENTOR

INVENTOR V2MCI-24 Manuel utilisateur

INVENTOR

INVENTOR MGHP-12 Manuel utilisateur

INVENTOR

INVENTOR OMI-09 Manuel utilisateur

INVENTOR

INVENTOR RG10B1/BGEF Manuel utilisateur

INVENTOR

INVENTOR RG57A3/BGEF Manuel utilisateur

INVENTOR

INVENTOR V4MFO-66B Manuel utilisateur

INVENTOR

INVENTOR V6MCRI32-18WiFiR/U6MRS32-18 Manuel utilisateur

INVENTOR

INVENTOR RG57A3/BGEF Manuel utilisateur

INVENTOR

INVENTOR RG10N2(D2S) Manuel utilisateur

INVENTOR

INVENTOR AR5VI-09WFI Manuel utilisateur

INVENTOR

INVENTOR V7DI-12WiFiR/U7RS-12 Manuel utilisateur

INVENTOR

INVENTOR PFI2VI-09WFI Manuel utilisateur

INVENTOR

INVENTOR V7CI-24WiFiR/U7RS-24 Manuel utilisateur

INVENTOR

INVENTOR O3MVI32-12WiFiR Manuel utilisateur

INVENTOR

INVENTOR V5MFI32-60 Manuel utilisateur

INVENTOR

INVENTOR A2MVI-09/A2MVO-09 Manuel utilisateur

INVENTOR

INVENTOR PFI2VI-09WFI/PFI2VO-09 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation

MODELS:

M3GHP290-12

M3GHP290-12BS

AIR CONDITIONING SYSTEMS

ENGLISH | ΕΛΛΗΝΙΚΑ | ROMANA

REMOTE CONTROLLER

• USER’S MANUAL

• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ

• MANUAL UTILIZATORULUI

4

1

5

6

7

9

10

10

10

11

11

12

15

Handling the remote controller ......................................................

Remote controller Specifications...................................................

Function buttons .................. .........................................................

Indicators on LCD ..........................................................................

How to use the buttons .................................................................

Auto operation.................................................................................

Cooling/Heating/Fan operation......................................................

Dehumidifying operation ...............................................................

Swing operation..............................................................................

Timer operation...............................................................................

ECONOMY operation ....................................................................

CONTENTS

Use the remote controller within a distance of 8

meters from the appliance, pointing it towards the

receiver. Reception is confirmed by a beep.

Location of the remote controller.

8m

CAUTIONS

The air conditioner will not operate if curtains, doors or other materials

block the signals from the remote controller to the indoor unit.

Prevent any liquid from falling into the remote controller. Do not expose

the remote controller to direct sunlight or heat.

If the infrared signal receiver on the indoor unit is exposed to direct

sunlight, the air conditioner may not function properly. Use curtains to

prevent the sunlight from falling on the receiver.

If other electrical appliances react to the remote controller, either move

these appliances or consult your local dealer.

The remote controller is powed by two dry

batteries(R03/LR03X2) housed in the rear

part and protected by a cover.

(1) Remove the cover by pressing and sliding off.

(2) Remove the old batteries and insert the new

batteries,placing the(+) and (-) ends correctly.

(3) Reattach the cover by sliding it back into

position.

NOTE: When the batteries are removed, the

remote controller erases all programming.

After inserting new batteries, the remote

controller must be reprogrammed.

Replacing batteries

.

Handling the remote controller

2

TEMP

AUTO

COOL

DRY

HEAT

FAN

HIGH

MED

LOW

MODE

FAN SPEED

SWING

TIMER ON

ECONOMY

ON/OFF

TIMER OFF

RESET LOCK

SET TEMPERATURE( C)

FOLLOW

ME LED

DISPLAY

ION

TURBO

5

1

5

6

7

9

10

10

10

11

11

12

15

Handling the remote controller ......................................................

Remote controller Specifications...................................................

Function buttons .................. .........................................................

Indicators on LCD ..........................................................................

How to use the buttons .................................................................

Auto operation.................................................................................

Cooling/Heating/Fan operation......................................................

Dehumidifying operation ...............................................................

Swing operation..............................................................................

Timer operation...............................................................................

ECONOMY operation ....................................................................

CONTENTS

Use the remote controller within a distance of 8

meters from the appliance, pointing it towards the

receiver. Reception is confirmed by a beep.

Location of the remote controller.

8m

CAUTIONS

The air conditioner will not operate if curtains, doors or other materials

block the signals from the remote controller to the indoor unit.

Prevent any liquid from falling into the remote controller. Do not expose

the remote controller to direct sunlight or heat.

If the infrared signal receiver on the indoor unit is exposed to direct

sunlight, the air conditioner may not function properly. Use curtains to

prevent the sunlight from falling on the receiver.

If other electrical appliances react to the remote controller, either move

these appliances or consult your local dealer.

The remote controller is powed by two dry

batteries(R03/LR03X2) housed in the rear

part and protected by a cover.

(1) Remove the cover by pressing and sliding off.

(2) Remove the old batteries and insert the new

batteries,placing the(+) and (-) ends correctly.

(3) Reattach the cover by sliding it back into

position.

NOTE: When the batteries are removed, the

remote controller erases all programming.

After inserting new batteries, the remote

controller must be reprogrammed.

Replacing batteries

.

Handling the remote controller

2

TEMP

AUTO

COOL

DRY

HEAT

FAN

HIGH

MED

LOW

MODE

FAN SPEED

SWING

TIMER ON

ECONOMY

ON/OFF

TIMER OFF

RESET LOCK

SET TEMPERATURE( C)

FOLLOW

ME LED

DISPLAY

ION

TURBO

6

Remote Controller Specifications

1. Operating Mode: AUTO, COOL, DRY, HEAT(Cooling only

model without), and FAN.

2. Timer Setting Function in 24 hours.

O O

3. Indoor Setting Temperature Range : 17 C~30 C(62 F~88 F).

4. Full function of LCD (Liquid Crystal Display)

5. Back light emitting.

Performance Feature

Function buttons

CAUTIONS

Do not mix old and new batteries or batteries of a different type.

Do not leave the batteries in the remote controller if it is not going

to be used for 2 or 3 months.

Dispose of the old batteries in the special containers to be found

in the sales outlets.

3 4

Model

Rated Voltage

-5 C 60 C( )

8m

3.0V(Dry batteries R03/LR03

RG51F/EF

2)

Environment

Signal Receiving

Range

O O

23 F~140 F

~

2

TEMP UP Button

Push this button to increase the indoor temper-

o o

ature setting in 1 C(2 F) increments to 30 C(88 F).

1

TEMP DOWN Button

Push this button to decrease the indoor temper-

o o

ature setting in 1 C(2 F) increments to 17 C(62 F).

7

SWING Button

Used to stop or start louver movement and

set the desired up/down airflow direction.

3

ON/OFF Button

Operation starts when this button is pressed

and stops when the button is pressed again.

Used to select the fan speed in four steps:

Auto Low Med High

FAN SPEED Button

4

Each time the button is pressed, the operation

modeis selected inthe sequenceof the following:

5

MODE Button

AUTO

COOL

DRY

HEAT FAN

NOTE Please do not select HEAT mode if

the machine you purchased is cooling only

type. Heat mode is not supported by the

cooling only appliance.

in 30 minutes increments, up to 10 hours, then at

1 hour increments up to 24 hours. To cancel the

Auto-on time setting, just press the button until

the time setting is 0.0.

6

TIMER ON Button

Press this button to activate the Auto-on time

setting. Each press will increase the time setting

ECONOMY/SLEEP Button

NOTE: While the unit is running under ECONOMY/

SLEEP mode, it would be cancelled if press MODE,

FAN SPEED or ON/OFF button.

Select this function during the sleeping time. It

can maintain the most comfortable temperature

and save energy. This function is available on

COOL, HEAT orAUTO mode only .

8

Model: RG51F/EF

SHORT CUT

I SENSE

1

3

5

7

9

11

2

4

6

8

10

12

7

Remote Controller Specifications

1. Operating Mode: AUTO, COOL, DRY, HEAT(Cooling only

model without), and FAN.

2. Timer Setting Function in 24 hours.

O O

3. Indoor Setting Temperature Range : 17 C~30 C(62 F~88 F).

4. Full function of LCD (Liquid Crystal Display)

5. Back light emitting.

Performance Feature

Function buttons

CAUTIONS

Do not mix old and new batteries or batteries of a different type.

Do not leave the batteries in the remote controller if it is not going

to be used for 2 or 3 months.

Dispose of the old batteries in the special containers to be found

in the sales outlets.

3 4

Model

Rated Voltage

-5 C 60 C( )

8m

3.0V(Dry batteries R03/LR03

RG51F/EF

2)

Environment

Signal Receiving

Range

O O

23 F~140 F

~

2

TEMP UP Button

Push this button to increase the indoor temper-

o o

ature setting in 1 C(2 F) increments to 30 C(88 F).

1

TEMP DOWN Button

Push this button to decrease the indoor temper-

o o

ature setting in 1 C(2 F) increments to 17 C(62 F).

7

SWING Button

Used to stop or start louver movement and

set the desired up/down airflow direction.

3

ON/OFF Button

Operation starts when this button is pressed

and stops when the button is pressed again.

Used to select the fan speed in four steps:

Auto Low Med High

FAN SPEED Button

4

Each time the button is pressed, the operation

modeis selected inthe sequenceof the following:

5

MODE Button

AUTO

COOL

DRY

HEAT FAN

NOTE Please do not select HEAT mode if

the machine you purchased is cooling only

type. Heat mode is not supported by the

cooling only appliance.

in 30 minutes increments, up to 10 hours, then at

1 hour increments up to 24 hours. To cancel the

Auto-on time setting, just press the button until

the time setting is 0.0.

6

TIMER ON Button

Press this button to activate the Auto-on time

setting. Each press will increase the time setting

ECONOMY/SLEEP Button

NOTE: While the unit is running under ECONOMY/

SLEEP mode, it would be cancelled if press MODE,

FAN SPEED or ON/OFF button.

Select this function during the sleeping time. It

can maintain the most comfortable temperature

and save energy. This function is available on

COOL, HEAT orAUTO mode only .

8

Model: RG51F/EF

SHORT CUT

I SENSE

1

3

5

7

9

11

2

4

6

8

10

12

8

Function buttons(continued)

5 6

Remote Screen Indicators

Push this button to set and activate your favorite

pre-settings.

9

SHORT CUT Button:

11

I SENSE Button

Temperature sensing and room temperature

display button.

TIMER OFF Button

10

Press this button to activate the Auto-off time

setting. Each press will increase the time setting

in 30 minutes increments, up to 10 hours, then at

1 hour increments up to 24 hours. To cancel the

Auto-off time setting, just press the button until

the time setting is 0.0.

12

Press this button to clear the display on the

indoor unit, press it again to light the

display.

LED Display Button

Press together the two buttons

simultaneously (SHORT CUT & TIMER

OFF buttons) for 5 seconds to lock the

keyboard. Press together the two buttons

again for 2 seconds to unlock the keyboard.

Press together simultaneously

Model: RG51F/EF

SHORT CUT

I SENSE

1

3

5

7

9

11

2

4

6

8

10

12

Information are displayed when the remote controller is power up.

Note:

All indicators shown in the figure are for the

purpose of clear presentation. But during the

actaul operation, only the relative function signs

are shown on the display window.

Displayed when data transmitted.

Displayed when remote controller is ON.

Low speed

NO display

Medium speed(some units)

High speed

Auto fan speed

Displayed when TIMER ON time is set

Displayed when TIMER OFF time is set

Indicated all the current settings are

locked

Shows set temperature or room

temperature, or time under TIMER setting

HIGH

MED

LOW

AUTO

COOL

DRY

HEAT

AUTO

HEAT

COOL

FAN

DRY

Mode display

Fan speed indication

FAN

HIGH

MED

LOW

Displayed when I SENSE feature is

activated(some units)

Displayed when SLEEP feature is activated

(some units)

9

Function buttons(continued)

5 6

Remote Screen Indicators

Push this button to set and activate your favorite

pre-settings.

9

SHORT CUT Button:

11

I SENSE Button

Temperature sensing and room temperature

display button.

TIMER OFF Button

10

Press this button to activate the Auto-off time

setting. Each press will increase the time setting

in 30 minutes increments, up to 10 hours, then at

1 hour increments up to 24 hours. To cancel the

Auto-off time setting, just press the button until

the time setting is 0.0.

12

Press this button to clear the display on the

indoor unit, press it again to light the

display.

LED Display Button

Press together the two buttons

simultaneously (SHORT CUT & TIMER

OFF buttons) for 5 seconds to lock the

keyboard. Press together the two buttons

again for 2 seconds to unlock the keyboard.

Press together simultaneously

Model: RG51F/EF

SHORT CUT

I SENSE

1

3

5

7

9

11

2

4

6

8

10

12

Information are displayed when the remote controller is power up.

Note:

All indicators shown in the figure are for the

purpose of clear presentation. But during the

actaul operation, only the relative function signs

are shown on the display window.

Displayed when data transmitted.

Displayed when remote controller is ON.

Low speed

NO display

Medium speed(some units)

High speed

Auto fan speed

Displayed when TIMER ON time is set

Displayed when TIMER OFF time is set

Indicated all the current settings are

locked

Shows set temperature or room

temperature, or time under TIMER setting

HIGH

MED

LOW

AUTO

COOL

DRY

HEAT

AUTO

HEAT

COOL

FAN

DRY

Mode display

Fan speed indication

FAN

HIGH

MED

LOW

Displayed when I SENSE feature is

activated(some units)

Displayed when SLEEP feature is activated

(some units)

10

7 8

Cooling /Heating/Fan operation

Ensure the unit is plugged in and power is

available.

1. Press the MODE button to select COOL, HEAT,

(cooling & heating models only) or FAN mode.

2. Press the TEMP button to set the desired

temperature. The temperature can be set

within a range of

3. Press the FAN SPEEDbutton to select the

fan speed in four steps- Auto, Low, Med,or High.

4. Press the ON/OFF button to start the air

conditioner.

17 C(62 F)~ 30 C in 1 C(2 F)

increments.

In the FAN mode, the setting temperature is not

displayed in the remote controller and you are not

able to control the room temperature either. In this

case, only step 1, 3 and 4 may be performed.

NOTE

Dehumidifying operation

Ensure the unit is plugged in and power is

available. The OPERATION indicator on the

display panel of the indoor unit illuminates.

1. Press the MODE button to select DRY mode.

2. Press the TEMP button to set the desired

temperature. The temperature can be set

within a range of

increments.

3. Press the ON/OFF button to start the air

conditioner.

17 C(62 F)~ 30 C in 1 C(2 F)

In the Dehumidifying mode, you can not switch

the fan speed. It has already been automatically

controlled.

NOTE

How to use the buttons

Auto operation

Ensure the unit is plugged in and power is

available. The OPERATION indicator on the

display panel of the indoor unit illuminates.

1. Press the MODE button to select Auto.

2. Press the TEMP button to set the desired

temperature. The temperature can be set

within a range of 17 C(62 F)~ 30 C in 1 C(2 F)

increments.

3. Press the ON/OFFbutton to start the air

conditioner.

1. In the Auto mode, the air conditioner can logically

choose the mode of Cooling, Fan, Heating and

Dehumidifying by sensing the difference between the

actual ambient room temperature and the set temper-

ature on the remote controller.

2. In the Auto mode, you can not switch the fan speed.

It has already been automatically controlled.

3. If the Auto mode is not comfortable for you , the

desired mode can be selected manually.

NOTE

Swing operation

Use the SWING button to adjust the Up/Down

airflow direction.

1. When press the button once and quickly, the

air flow direction setting feature of the louver is

activated. The moving angle of the louver is

o

6 for each press. Keep pressing the button to

move the louver to the desired position.

2. If keep pressing the SWING button without

releasing for 2 more seconds, the auto swing

feature of the louver is activated. The horizontal

louver would swing up/down automatically.

Press it again to stop.

NOTE: When the louver swing or move to a

position which would affect the cooling

and heating effect of the air conditioner,

it would automatically change the swing/

moving direction.

3

1

2

SHORT CUT

I SENSE

3

1

2

SHORT CUT

I SENSE

1

SHORT CUT

I SENSE

4

1

2

3

SHORT CUT

I SENSE

4

1

2

3

SHORT CUT

I SENSE