Intracom jetSpeed 520 Manuel utilisateur
Ver.1.0
10/03
User Manual
jetSpeed 520
Getting Started
page 1 / 84
Contents
1GETTING STARTED.................................................... 3
1.1 OVERVIEW ....................................................................... 3
1.2 PACKAGING ..................................................................... 4
1.3 APPEARANCE................................................................... 5
1.3.1 FRONT PANEL ........................................................................................5
1.3.2 REAR PANEL ..........................................................................................6
1.4 HARDWARE INSTALLATION............................................... 7
1.5 MANAGEMENT.................................................................. 8
1.6 DEFAULT VALUES ............................................................ 9
1.7 SOFTWARE UPGRADE .................................................... 10
1.8 CONSOLE SETUP ........................................................... 11
2WEB INTERFACE MANAGEMENT ...............................12
2.1 OVERVIEW ..................................................................... 12
2.2 PREPARATION................................................................ 12
2.3 LOGIN ............................................................................ 13
2.3.1 HOME ...................................................................................................14
2.3.2 LAN.......................................................................................................16
2.3.3 WAN......................................................................................................21
2.3.4 BRIDGING.............................................................................................31
2.3.5 ROUTING ..............................................................................................33
2.3.6 SERVICES ............................................................................................35
2.3.7 ADMIN...................................................................................................47
3QUICK PROTOCOL SETUP ........................................54
3.1 RFC 1483 BRIDGE........................................................... 55
3.2 PPPOE ROUTE CONFIGURATION..................................... 58
3.3 RFC 1483 + NAT ............................................................. 59
3.4 PPPOA ROUTE CONFIGURATION..................................... 62
3.5 IPOA ROUTE CONFIGURATION........................................ 65
3.6 DHCP CONFIGURATION .................................................. 68
3.7 NAT CONFIGURATION..................................................... 70
4USB DRIVER INSTALLATION .....................................72
4.1 INSTALLATION ............................................................... 72
4.2 ADSL STATUS ................................................................ 75
4.3 UNINSTALLATION ........................................................... 77
APPENDIX – SPECIFICATIONS ...............................................79
DECLARATION OF CONFORMITY............................................83
User Manual
jetSpeed 520
Getting Started
Ver.1.0
10/03
page 2 / 84
(page intentionally left blank)
Ver.1.0
10/03
User Manual
jetSpeed 520
Getting Started
page 3 / 84
1 GETTING STARTED
1.1 OVERVIEW
jetSpeed 520 is a multi-mode ADSL Router, compliant with:
• ANSI T1.413 Issue 2
• ITU G.992.1 (G.dmt)
• G.992.2 (G.lite)
jetSpeed 520 provides high-speed Internet access via one WAN port over
ATM over ADSL and also connects to the corporate network via one
10/100BaseT Ethernet port and one USB port. jetSpeed 520 allows service
providers to deploy ADSL rapidly over existing wire infrastructure (POTS or
ISDN line).
Features
High Speed Asymmetrical Data Transmission on a Single Twisted Copper
Pair
Full rate operation up to 8Mbps downstream and up to 1Mbps upstream.
G.lite operation up to 1.5Mbps downstream rate and 512Kbps upstream rate
One 10/100BaseT Ethernet Port and one USB Port for PC connection
DHCP server supported for easy LAN IP address management
Supports PPPoE (RFC2516), PPP (RFC2364) and IP (RFC 2225/RFC1577)
over ATM over ADSL
RFC2684 (RFC1483) Bridged/Routed for both LLC/VC MUX
Allows LAN users to access Internet through Network Address Translation
(NAT, IP sharing) simultaneously
Local OAM&P through command line interface via RJ-45 Ethernet port or RS-
232 Craft port (optional)
Configuration and management via local Telnet and web browser through the
Ethernet interface and remotely through ADSL interface
Supports applications such as TFTP, DHCP, Telnet, HTTP and FTP
Firmware upgradeable through TFTP
Interoperability complies with TR-48, U-R2
User Manual
jetSpeed 520
Getting Started
Ver.1.0
10/03
page 4 / 84
1.2 PACKAGING
This package consists of the following items:
jetSpeed 520 ADSL Device Unit
RJ-45 Cable (Ethernet Cable)
RJ-11 Cable (Telephone Cable)
USB Cable
AC Adapter
CD-ROM includes User’s Manual and USB Driver
Line Filter Splitter
Line filters for jetSpeed 520 or a central splitter for
jetSpeed 520i and an additional RJ-11 Cable
Ver.1.0
10/03
User Manual
jetSpeed 520
Getting Started
page 5 / 84
1.3 APPEARANCE
1.3.1 FRONT PANEL
4
3
21 5
Fig. 1-1
LABEL LED
STATUS COLOR DESCRIPTION
1 LAN ON Green Ethernet port is connected
2 USB ON Green USB port is connected
3 PWR ON Green Power supply is connected
4 WAN
Blinking Green Synchronization with DSLAM
ON Green ADSL link is ready
5 ALM
Blinking Red Booting up
ON Red Error
Table 1-1
User Manual
jetSpeed 520
Getting Started
Ver.1.0
10/03
page 6 / 84
1.3.2 REAR PANEL
Fig. 1-2
LABEL DESCRIPTION
1 PWR Power jack; connect to a power adapter
2 CONSOLE
Serial port; connect to an ASCII data terminal
3 ETHERNET
RJ-45 port; connect to a PC or LAN
4 USB USB port; connect to a PC
5 RESET Resets jetSpeed 520 to its factory default settings
6 WAN RJ-11port; connect to the ADSL outlet
Table 1-2
Ver.1.0
10/03
User Manual
jetSpeed 520
Getting Started
page 7 / 84
1.4 HARDWARE INSTALLATION
Power
Supply
Management
Terminal PC ADSL
outlet
Fig. 1-3
Step Action
1. Connect one end of the ADSL cable to the WAN port of jetSpeed 520 and
the other end to the ADSL wall outlet.
2. In case jetSpeed 520 is installed, connect the telephone devices in any
socket placing a microfilter. In case jetSpeed 520i is installed, connect the
telephone devices to the "TEL" output of the central splitter.
3. Use a RJ-45 cable to connect one end to the Ethernet port of the jetSpeed
520 and the other end to the LAN or a PC with an Ethernet adapter
installed. You may also connect a USB cable from the USB port to a PC.
4. Use a 9-pin RS-232 cable to connect the Console port to a serial port of a
terminal such as PC with data terminal emulation software (Hyper
Terminal) installed, in order for local management.
5. Plug in the AC adapter to the AC power socket and the other end into the
PWR inlet of the jetSpeed 520.
NOTE: Be sure to use a RJ-45 crossover cable while connecting to a hub.
User Manual
jetSpeed 520
Getting Started
Ver.1.0
10/03
page 8 / 84
1.5 MANAGEMENT
jetSpeed 520 supports simple, flexible and easy-to-operate methods for
management purposes. jetSpeed 520 can be managed via the following
paths:
• Console port: Use a RS-232 cable for connecting jetSpeed 520 to a
terminal or a PC running a terminal emulation program, such as Hyper
Terminal. (For further details, see paragraph 1.8 Console Setup)
• Local Ethernet Port (Telnet): Connect the Ethernet port to your local
network or to directly to a PC. From the command window type "telnet
192.168.1.1".
• Local Ethernet Port (Web Browser): Connect the Ethernet port to
your local network or directly to a PC. Start the web browser and enter
default local Ethernet IP address "192.168.1.1" on the address bar.
• Remote Management: While jetSpeed 520 is running, you can
remotely type “telnet <wan address>” from a workstation, which is
connected to a ADSL network or in general on the Internet.
NOTE: As operating an ADSL device requires technical know-how and
experience. It is recommended that only qualified technical staffs manage the
jetSpeed 520. Therefore, a password authentication is required when you
enter the web interface. To obtain the password, see paragraph 1.6 Default
Values.
Table des matières
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité