Intermec PM4I Manuel utilisateur
Installation
Instructions
RFID Kit
(Gen 2, 869/915
MHz)
for the EasyCoder®
PM4i Printer
ii RFID Kit (Gen 2, 869/915 MHz) Installation Instructions
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
e information contained herein is proprietary and is provided solely
for the purpose of allowing customers to operate and service Intermec-
manufactured equipment and is not to be released, reproduced, or used
for any other purpose without written permission of Intermec.
Information and specifications contained in this document are subject to
change without prior notice and do not represent a commitment on the
part of Intermec Technologies Corporation.
© 2005, 2006 by Intermec Technologies Corporation. All rights
reserved.
e word Intermec, the Intermec logo, Norand, ArciTech, CrossBar,
Data Collection Browser, dcBrowser, Duratherm, EasyADC, EasyCoder,
EasyLAN, Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics,
INCA (under license), InterDriver, Intermec Printer Network Manager,
IRL, JANUS, LabelShop, Mobile Framework, MobileLAN, Nor*Ware,
Pen*Key, Precision Print, PrintSet, RoutePower, SmartSystems, TE 2000,
Trakker Antares and Virtual Wedge are either trademarks or registered
trademarks of Intermec Technologies Corporation.
roughout this manual, trademarked names may be used. Rather than
put a trademark (™ or ®) symbol in every occurrence of a trademarked
name, we state that we are using the names only in an editorial fashion,
and to the benefit of the trademark owner, with no intention of infringe-
ment.
ere are U.S. and foreign patents pending.
Torx is a registered trademark of Camcar Division of Textron Inc.
RFID Kit (Gen 2, 869/915 MHz) Installation Instructions iii
Patent Information
is product is covered by one or more of the following U.S. patents:
4,739,328; 4,786,907; 4,864,158; 4,888,591; 4,999,636; 5,030,807;
5,055,659; 5,280,159; 5,504,485; 5,521,601; 5,550,547; 5,673,037;
5,763,867; 5,777,561; 5,825,045; 5,828,318; 5,828,693; 5,850,181;
5,850,187; 5,942,987; 5,995,019; 6,078,251; 6,121,878; 6,122,329;
6,172,596; 6,195,053; 6,249,227; 6,280,544; 6,286,762; 6,286,763;
6,288,629; 6,360,208; 6,384,712; 6,404,325; 6,429,775; 6,486,769;
6,501,807; 6,525,648; 6,639,509; 6,645,327; 6,677,852; 6,768,414;
6,784,789; 6,816,063.
ere may be other U.S. and foreign patents pending.
FCC Notice (United States of America)
WARNING
is equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and
found to comply with the limits for a Class A computing device pursu-
ant to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a com-
mercial environment. Operation of this equipment in a residential area
is likely to cause interference in which case the user at his own expense
will be required to take whatever measures may be required to correct the
interference. e radio is compliant with FCC Part 15 section 247.
iv RFID Kit (Gen 2, 869/915 MHz) Installation Instructions
Declaration of Conformity (CE)
We,
Intermec Printer AB
Flöjelbergsgatan 1C
Box 123
S-431 22 Mölndal
Sweden
declare under our sole responsibility1that the product
RFID Kit (Gen 2, 869/915 MHz)
to which this declaration relates
is in conformity with the following standards
Safety:
EN 60 950
RTTE/EMC:
EN 300 220-3
EN 301 489-3
EMC:
Based upon EN 61000-6-4:2001 Generic Emissions Standard
Based upon EN 61000-6-2:2001 Generic Immunity Standard
following the provisions of Directives 89/336/EEC, 73/23/EEC and 2004/108/EC
Limitations:
Product is for operation under a general licence or licence exemption in
the following countries only: Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Luxembourg, e Netherlands, Portugal, Spain,
Sweden, United Kingdom, Norway, Switzerland.
Mölndal 2005-11-14
................................................................
Per-Ove Jacobsson
Site Manager
1 /. Intermec assumes no responsibility regarding the CE Directive if the
printer is handled, modified, or installed in other manners than those described
in the manuals.
RFID Kit (Gen 2, 869/915 MHz) Installation Instructions v
Contents
About ese Instructions .............................................................. vi
Printer Firmware Recommendations ............................................. vi
Limitations ................................................................................... vi
Contents of Installation Kit............................................................1
Step-by-Step Instructions ...............................................................2
vi RFID Kit (Gen 2, 869/915 MHz) Installation Instructions
About These Instructions
ese instructions describe the physical installation of an RFID Kit
(Gen 2, 869/915 MHz) in the Intermec EasyCoder PM4i printer. For a
complete list of RFID commands and functionality, please refer to the
reference manual for your operating system (IPL or Fingerprint).
e internal RFID radio module operates on the UHF band at 869 or 915
MHz depending on region.
e RFID Kit (Gen 2, 869 MHz) uses an EPCglobal
Gen 2-certified IM5 Module (86X MHz RFID
frequency band).
e RFID Kit (Gen 2, 915 MHz) uses an EPCglobal
Gen 2-certified IM5 Module (915 MHz RFID
frequency band).
Printer Firmware Recommendations
To ensure complete functionality, your printer should be fitted with
either Intermec Fingerprint v8.70 (or later) or IPL v2.70 (or later).
Limitations
is device is intended for use in the EasyCoder PM4i
printer only.
e device is country/region specific and must be ordered
for the correct country/region. Use of this device in other
regions than shown on the device home page/test label may
violate applicable law.
RFID Kit (Gen 2, 869/915 MHz) Installation Instructions 1
Contents of Installation Kit
I/O Board Paper Guide with RFID Antenna
and cable
IM5 Reader Module
IM5 Data Cable IM5 Power Cable Bracket assy
RSMA/SMA to
MMCX Adapter
Cable
Two Hexagon
Lock Nuts
Five MRT 4x6
Screws
Two MRT
4x16 Screws
Spacer Screw
(20mm)
Spacer Screw
(10mm)
ree RSMA/
SMA Termina-
tion Plugs
Cable Tie
Dual Slot I/O Bus
Cable
RFID Label
Two MRT
3x5 Screws
2 RFID Kit (Gen 2, 869/915 MHz) Installation Instructions
Step-by-Step Instructions
e installation described in this section must only be
performed by an authorized service technician. Intermec
assumes no responsibility for personal injury or damage
to the equipment if the installation is performed by an
unauthorized person.
Take precautions against electrostatic discharges, for
example by wearing grounded wrist straps.
Before you begin, make sure the printer has been switched
off and the power cord and communication cables are
disconnected.
Note: is installation requires a #T10 and a #T20 Torx
screwdriver, a straight-slot screwdriver and an 8mm socket
wrench.
RFID Kit (Gen 2, 869/915 MHz) Installation Instructions 3
Turn the LSS adjustment screw counterclockwise to move the position of the Label
Stop Sensor so that it does not obstruct the small hole leading into the electronics
compartment.
Open the printer’s side door.
2
1
4 RFID Kit (Gen 2, 869/915 MHz) Installation Instructions
Route the antenna connection cable through the opening in the center deck. Slide
the replacement paper guide (with antenna) and the edge guide onto the shaft.
Carefully slide the upper
paper guide out along the
support shaft. Loosen the
edge guide and remove
both items from the shaft.
3
4
Autres manuels pour PM4I
18
Table des matières
Autres manuels Intermec Imprimante
Intermec
Intermec PB21 Manuel utilisateur
Intermec
Intermec PM43 Manuel utilisateur
Intermec
Intermec EasyCoder PF8 Manuel utilisateur
Intermec
Intermec PK80 Series Manuel utilisateur
Intermec
Intermec 4400 Manuel utilisateur
Intermec
Intermec PB50 Manuel utilisateur
Intermec
Intermec PR2 Manuel utilisateur
Intermec
Intermec PB42 Manuel utilisateur
Intermec
Intermec ColorCoder V4 Manuel du propriétaire
Intermec
Intermec PB41 Manuel utilisateur
Intermec
Intermec EasyCoder 7421 Manuel utilisateur
Intermec
Intermec PF8D Manuel utilisateur
Intermec
Intermec PK80 Series Manuel utilisateur
Intermec
Intermec EasyCoder PC4 Manuel utilisateur
Intermec
Intermec EasyCoder PX4i Manuel utilisateur
Intermec
Intermec EasyCoder 601XP Manuel
Intermec
Intermec PB50 Manuel utilisateur
Intermec
Intermec PB42 Manuel utilisateur
Intermec
Intermec EasyCoder 101 Manuel utilisateur
Intermec
Intermec EasyCoder F4 Manuel utilisateur
