Intermec Janus 2010 Manuel utilisateur

nugget code39

helconital

Getting Started

nuggetnugget

code39code39

helconital

nuggnuggCODECODEhelcdGetting Started

1-3

This chapter introduces the JANUS 2010 reader and explains how to get your new

reader up and running.

What Is the JANUS 2010 Reader?

The JANUS 2010 is a combination hand-held bar code reader and computer. It

contains a 386 microprocessor, contains Microsoft MS-DOS, and is

PC-compatible.

ABCDEF

GH I JKL

MNOPQR

STUVWX

F2 F3 F4 F5

(

Ctrl Alt

Esc

end

Caps

home

enter

ins del

pg dn

pg up

num lock

–

—

–

{

][

}

F6 F7 F8 F9 F10

space

(

enter

Scanner or

COM2 port

Antenna for radio

frequency communications

Rechargeable NiCad

battery pack

Keypad supports all

102 keys available

on a PC

2010U.106

Keypad

16 line by 20 character

CGA display

Bottom of reader

PC card

to store files

Type I PC

card drive

c:\>dir

Features

• PC-compatible

• 640K conventional memory

• Three internal memory drives

• Specialized for bar code

data collection

• DOS operating system

and file structure

• Runs PC applications

JANUS 2010 Hand-Held Computer User’s Manual (4MB)nuggnuggCODECODEhel

1-4

Accessories for the Reader

You can use these accessories with the JANUS 2010 reader:

JD2010 Communications Dock The dock allows the reader to communicate

with a host computer and other devices through two serial ports, while

simultaneously charging the NiCad battery pack in the reader. The dock also

has a slot to charge a spare NiCad battery pack.

JZ2010 Battery Charger The charger lets you charge up to four NiCad battery

packs at one time. The battery charger senses when a battery pack is fully

charged and will not overcharge it.

JL2010 Optical Link Adapter The optical link adapter allows the reader to

communicate with a host computer or other device by means of an RS-232

serial port. You can also connect a power supply to the optical link adapter to

operate the reader and charge the NiCad battery pack.

Wands and Scanners You can attach a wand or scanner to enter bar code data

with the reader. For a list of input devices you can use, see “Attaching a

Wand or Scanner” later in this chapter.

2010U.084

COM2 Hardware Adapter The COM2 hardware (serial) adapter (Part No.

061799) lets you use the scanner port as COM2 if you do not need an input

device.

PC Cards Intermec has certified third-party Type I and Type II PC cards,

including memory, modem, and network cards. Memory cards you use in the

JANUS reader provide additional disk storage space, not executable

conventional memory. Contact your local Intermec sales representative for

ordering information.

Cables You may need to purchase cables for serial data communications

between the reader and peripheral devices. For help, see “Physical and

Environmental Specifications” in Appendix A.

nuggnuggCODECODEhelcdGetting Started

1-5

JANUS 2010 Models and Options

The JANUS family of 2010 readers includes these models:

J2010 The basic reader is a combination hand-held programmable data

collection computer. The reader has a Type I PC card drive for Type I memory

cards and uses a serial port for data communications.

J2010 with 900 MHz RF Back or JG2010 with 2.4 GHz Radio This reader

complements the functionality of the basic reader with an optional RF back,

which allows the reader to communicate with a host computer over a radio

frequency (RF) network.

J2010 with a PCMCIA Back This reader complements the functionality of the

basic reader with an optional Type II PC card drive that accepts Type I or

Type II memory and I/O cards.

These options are available for all the reader models:

• Alphanumeric keypad that is available in English, French, German, Italian,

and Spanish.

• Large numeric keypad that is available in English.

• Terminal emulation (TE) software and keypads that let the reader emulate

an IBM 3270 or 5250 terminal (or display station).

• Radio frequency communications available for 900 MHz or 2.4 GHz

networks.

This manual tells you how to use the basic features in all models of the JANUS

reader. Special information about TE and RF are included in the quick reference

guides that are shipped with this manual or with your 2.4 GHz installation kit.

ABCDEF

GHIJKL

MNOPQR

STUVWX

F2 F3 F4 F5

(

Ctrl Alt

Esc

end

Caps

home

enter

ins del

pg dn

pg up

num lock

–

—

–

{

][

}

F6 F7 F8 F9 F10

TMTM

space

(

enter

ABCDEF

GHIJKL

MNOPQR

STUVWX

F2 F3 F4 F5

(

Ctrl Alt

Esc

end

Caps

home

enter

ins del

pg dn

pg up

num lock

–

—

–

{

][

}

F6 F7 F8 F9 F10

TMTM

space

(

enter

ABCDEF

GH I JKL

MNOPQR

STUVWX

F2 F3 F4 F5

(

Ctrl Alt

Esc

end

Caps

home

enter

ins del

pg dn

pg up

num lock

–

—

–

{

][

}

F6 F7 F8 F9 F10

TMTM

space

(

enter

J2010 J2010 with 900 MHz RF Back

or JG2010 with 2.4 GHz Radio J2010 with a

PCMCIA Back

2010U.092

JANUS 2010 Hand-Held Computer User’s Manual (4MB)nuggnuggCODECODEhel

1-6

Using the Reader for the First Time

Follow these steps to get your new JANUS 2010 reader up and running:

1. Unpack the reader, carrying case, NiCad battery pack, companion disks,

and documentation.

2. Charge the NiCad battery pack.

3. Install the charged NiCad battery pack.

4. Turn on the reader for the first time.

5. Set the time and date.

6. Connect a wand or scanner.

7. Verify that the reader is operating correctly.

Unpacking the Reader

When you remove the reader from its box, save the box and shipping material

in case you need to ship or store the reader. Check the contents of the box

against the invoice for completeness and contact your Intermec representative

if there is a problem.

Look on the Boot Utilities companion disk 1 for a README.DOC file. This file

may contain information about the reader that was not available when this

manual was published. View or print this file with any text editor.

Worldwide Sales

and Service

JANUS 2010

Manual Supplement

JANUS Bridge Battery

Information Sheet

Software

companion disks

JANUS 2010

Getting Started Guide

2010U.081

JANUS 2010

NiCad battery

pack

Carrying

case

nuggnuggCODECODEhelcdGetting Started

1-7

Charging the NiCad Battery Pack

The reader’s nickel-cadmium (NiCad) battery pack is shipped to you

completely discharged of power, so you must charge the battery pack before

you can use the reader. There are four ways to charge the battery pack. For

help, see the JANUS accessory quick reference guides.

Note: To learn about using and maximizing the reader’s battery power, see

“Managing Your Battery Power” in Chapter 2.

Method Description Time to Charge

Place the battery pack in the battery slot

of the communications dock. About 2 hours

Place the battery pack in the battery

charger. About 2 hours

2010U.010

Install the battery pack in the reader,

place the reader in the communications

dock, and connect an external power

supply to the dock.

About 15 hours (with

the reader turned off)

–

—

2010U.008

Install the battery pack in the reader,

attach the optical link adapter to the

reader, and connect an external power

supply to the optical link adapter.

About 15 hours (with

the reader turned off)

JANUS 2010 Hand-Held Computer User’s Manual (4MB)nuggnuggCODECODEhel

1-8

Installing the NiCad Battery Pack

You must install the newly charged battery pack into the reader.

To install the battery pack

1. Make sure the two yellow battery pack locks on the end of the battery pack

are pushed down in the unlocked position.

2. Place the two battery pack tabs under the reader’s back.

IntermecIntermec

Battery

pack

Battery pack

tab (2 places)

Reader

2010U.112

Reader

Battery

pack lock

(2 places)

3. Slide the battery pack into the back of the reader until it snaps into place.

4. Push the two battery pack locks up to lock the battery pack in place.

Note: The battery pack locks must be closed to use the reader.

nuggnuggCODECODEhelcdGetting Started

1-9

Turning On the Reader for the First Time

When you turn on the reader for the first time, you need to perform an

initialization sequence to prepare the reader for operation.

To turn on the reader for the first time

1. After you install the charged battery pack, turn on the reader by pressing

the yellow

key on the top right of the keypad.

2. The Boot Loader menu appears, and the Reboot command is selected.

BOOT LOADER

Reboot

Password

Dump

Load

Resume

Storage

Off

Can Not Resume

Please Reboot

2010U.019

Press

to reboot the reader. The reader performs a cold boot, which is

described in “Cold Booting the Reader” in Chapter 9.

Note: If you do not press a key within 60 seconds after the reader displays a screen,

the reader shuts off and you have to start over at Step 1.

2010U.030

BACKUP BATTERY

Backup Battery

Tests Good

Storage Mode is On

Please Press

Enter to Continue

Esc to Go Off

3. The Backup Battery screen appears, describing the status of the lithium

bridge battery.

Press

to continue booting the reader.

The reader continues booting and displays the DOS prompt when it

finishes.

JANUS 2010 Hand-Held Computer User’s Manual (4MB)nuggnuggCODECODEhel

1-10

Setting the Time and Date

Next, you set the current time and date.

To set the time and date

1. Type this command at the DOS prompt and press

time

2. Type the current time in the format HH:MM:SS and then press

To type a colon on an alphanumeric keypad, press

. To type a colon

on a large numeric keypad, press

3. Type this command at the DOS prompt and press

date

4. Type the current date in the format MM-DD-YY and then press

To type a dash on an alphanumeric keypad, press

. To type a dash on

a large numeric keypad, press

Press

to type the dashes. Then press

Autres manuels pour Janus 2010

Table des matières

Autres manuels Intermec Lecteur de codes-barres

Intermec

Intermec Sabre 1553 Manuel

Intermec

Intermec SF61 Manuel utilisateur

Intermec

Intermec Sabre 1555 Manuel utilisateur

Intermec

Intermec SG10T Manuel utilisateur

Intermec

Intermec Sabre 1400 Manuel utilisateur

Intermec

Intermec IF5 Manuel utilisateur

Intermec

Intermec EasyCoder PD41 Manuel utilisateur

Intermec

Intermec CN70 RFID Manuel utilisateur

Intermec

Intermec IF4 Manuel utilisateur

Intermec

Intermec IP4 Manuel utilisateur

Intermec

Intermec 1280 Series Guide de référence

Intermec

Intermec SG20B Manuel utilisateur

Intermec

Intermec SF51 Manuel utilisateur

Intermec

Intermec SF51 Manuel utilisateur

Intermec

Intermec MaxiScan 1000 Guide de configuration rapide

Intermec

Intermec SR61T Manuel utilisateur

Intermec

Intermec IV6 Manuel utilisateur

Intermec

Intermec 3400 Manuel utilisateur

Intermec

Intermec ScanPlus 1800VT Manuel

Intermec

Intermec IF30 Manuel utilisateur

Intermec

Intermec EasyCoder F4 Mode d’emploi

Intermec

Intermec Sabre 1545 Manuel utilisateur

Intermec

Intermec IP4 Manuel

Intermec

Intermec SF51 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur