Interlogix POC2502 Series Manuel utilisateur

IFS POC2502 Series Quick Start Guide

Content

Package Contents 1

Requirements 1

Terminal Setup 2

Logon to Console 2

Configuring IP Address 2

Saving the Configuration via the Console 3

Starting Web Management 3

Starting Long Reach PoE Communication 4

Saving the Configuration via the Web 5

Recovering Back to Default Configuration 6

Contact information 6

This is the IFS NS4802-24P-4S-2X Quick Start Guide. This

document provides basic instructions for installing and using

the IFS NS4802-24P-4S-2X.

Package Contents

Thank you for purchasing IFS - Multi-port Coax + 2-port

10/100/1000T + 2-port 100/1000X SFP Long Reach PoE over

Coaxial Managed Switch

The description of this model is shown below:

POC2502-

8CXP-2T-2S

8-port Coax + 2-port 10/100/1000T + 2-port

100/1000X SFP Long Reach PoE over Coaxial

Managed Switch

POC2502-

16CXP-2T-2S

16-port Coax + 2-port 10/100/1000T + 2-port

100/1000X SFP Long Reach PoE over Coaxial

Managed Switch

“POC2502 Managed Switch” is used as an alternative name

in this Quick Installation Guide.

Open the box of the POC2502 Managed Switch and carefully

unpack it. The box should contain the following items:

• The POC2502 Managed Switch x 1

• Quick Installation Guide x 1

• Rubber Feet x 4

• Power Cord x 1

• RS-232 to RJ45 Console Cable x 1

• SFP Dust Cap x 2

• BNC Female Dust Cap x 8 (POC2502-8CXP)

• BNC Female Dust Cap x 16 (POC2502-16CXP)

• Warning Sticker x 8 (POC2502-8CXP)

• Warning Sticker x 16 (POC2502-16CXP)

• Rack-mount Accessory Kit x 1

If any item is found missing or damaged, please contact your

local reseller for replacement.

Requirements

•Workstations running Windows XP/2003/Vista/7/8/2008, or

other platforms are compatible with TCP/IP protocols.

•Workstations are installed with Ethernet NIC (Network

Interface Card)

•Serial Port Connection (Terminal)

• The above Workstations come with COM Port (DB9) or

USB-to-RS232 converter.

• The above Workstations have been installed with

terminal emulator, such as Hyper Terminal included in

Windows XP/2003.

• Serial cable -- one end is attached to the RS232 serial

port, while the others end to the console port of the

Managed Switch.

•Ethernet Port Connection

• Network cables -- Use standard network (UTP) cables

with RJ45 connectors.

• The above PC is installed with Web Browser and JAVA

runtime environment plug-in.

P/N 1073046 • REV A • 10SEP15 1

It is recommended to use Internet Explore 8.0 or

above to access the Managed Switch. I

f the Web

interface of the Managed Switch

is not accessible,

please turn off the anti-virus software or firewall

and then try it again.

Terminal Setup

To configure the system, connect a serial cable to a COM port

on a PC or notebook computer and to RJ45 type of serial port

of the Managed Switch.

Figure 1: Managed Switch Console Connectivity

A terminal program is required to make the software

connection to the Managed Switch.

1. Run terminal program on the OS.

2. When the following screen appears, make sure that the

COM port should be configured as:

♦

Baud : 115200

♦

Data bits : 8

♦

Parity : None

♦

Stop bits : 1

♦

Flow control : None

Figure 2: COM Port Configuration

Logon to Console

Once the terminal is connected to the device, power on the

Managed Switch and the terminal will display “running testing

procedures”. Then, the following message asks to log-in user

name and password. The factory default user name and

password are shown as follows and the login screen in Figure

3 appears.

Username: admin

Password: admin

Figure 3: POC2502 Managed Switch Console Login Screen

The user can now enter commands to manage the Managed

Switch. For a detailed description of the commands, please

refer to the following chapters.

1. For security reasons, please change and

memorize the new password after this first

setup.

2. Only accept command in lowercase letter

under console interface.

Configuring IP Address

The Managed Switch is shipped with default IP address shown

below.

IP Address: 192.168.0.100

Subnet Mask: 255.255.255.0

To check the current IP address or modify a new IP address

for the Switch, please use the procedures as follows:

Show the current IP Address

1. At the “POC2502 Series#” prompt, enter “show ip ”.

2. The screen displays the current IP address as shown in

Figure 3.

Figure 3: IP Information Screen

2 IFS POC2502 Series Quick Start Guide

Configuring IP Address

3. At the “POC2502 Series#” prompt, enter “configure”.

4. At the “POC2502 Series (config)#” prompt, enter the

following command and press <Enter> as shown in Figure

POC2502 Series(config)# ip address 192.168.1.100

mask 255.255.255.0

POC2502 Series(config)# ip default-gateway

192.168.1.254

The previous command would apply the following settings for

the Switch.

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.254

Figure 4: IP Address Screen

5. Repeat Step 1 to check if the IP address is changed.

If the IP is successfully configured, the POC2502 Managed

Switch will apply the new IP address setting immediately. You

can access the Web interface of the POC2502 Managed

Switch through the new IP address.

If you are not familiar with the

console command or

the related parameter, enter “?

” anytime in console

to get the help description.

Saving the Configuration via the Console

In the switch, the running configuration file stores in the RAM.

In the current version, the running configuration sequence

running-config can be saved from the RAM to FLASH by

writing the command or copying the running-config startup-

config command, so that the running configuration sequence

becomes the startup configuration file, which is called

configuration save.

1. At the “POC2502 Series#” prompt, enter “copy running-

config startup-config” as shown in Figure 5.

Figure 5: The Configuration Screen

Starting Web Management

The following shows how to start up the Web Management of

the POC2502 Managed Switch. Note, the POC2502 Managed

Switch is configured through an Ethernet connection. Please

make sure the manager PC must be set on the same IP

subnet address.

For example, the default IP address of the POC2502 Managed

Switch is 192.168.0.100, then the manager PC should be set

at 192.168.0.x (where x is a number between 1 and 254,

except 100), and the default subnet mask is 255.255.255.0.

Figure 6: IP Management Diagram

Logging in to the Managed Switch

1. Use Internet Explorer 8.0 or above Web browser and

enter IP address http://192.168.0.100 to access the Web

interface.

2. When the following dialog box appears, please enter the

default user name and password “admin”. The login

screen in Figure 7 appears.

Default Username: admin

Default Password: admin

Figure 7: Login Screen

IFS POC2502 Series Quick Start Guide 3

After entering the password, the main screen appears as

Figure 8 shows.

Figure 8: Web Main Screen of POC2502 Managed Switch

The Switch Menu on the left of the Web page lets you access

all the commands and statistics the POC2502 Managed Switch

provides.

Figure 9: Switch Menu

Now, you can use the Web management interface to continue

the Switch management.

Please refer to the user’s manual for more information.

Now, you can use the Web management interface to continue

the Switch management. For more detailed switch

configuration, please refer to the user’s manual.

Starting Long Reach PoE Communication

The following shows how to start up the Long Reach PoE

Communication of the POC2502 Managed Switch from Web

Management.

The POC2502 Managed Switch is configured

DISABLED Long Reach PoE function as default.

Connect the Coaxial Cable

1. Insert the coaxial cable with one side being the 75ΩBNC

plug connector into the Long Reach Ethernet coaxial

interface.

2. Connect the other end of the cable to a device with Long

Reach Ethernet coaxial Extender installed.

3. Tight the BNC male connector gently.

4. Enable Long Reach Power over Ethernet function for the

all POC2502 ports from Web UI.

5. Check the LNK LED of the Long Reach Power over

Ethernet interface on the front of the POC2502 Managed

Switch. Ensure that the Long Reach Power over

Ethernet interface is operating correctly.

1. Before installation, please consider the

distance and watts value demand for PD

devices. The POC2502 Managed Switch

and POC2502 Extender PoE output

capacity and upload

/ download

performance depend on the length of

coaxial cable. You can refer to user

manual chapter 1.5 for more information.

2. As there are various resistance values in

the category of RG-59/U or RG-6/U

cable, the actual data rate will vary on

the quality of the copper wire and

environmental factors.

4 IFS POC2502 Series Quick Start Guide

Remove the connected the Coaxial Cable

1. Make sure there is no network activity anymore

2. Disable Long Reach Power over Ethernet function for the

all POC2502 ports from Web UI.

3. Loose the BNC male connector gently.

4. Pull out the coaxial cable gently.

Never pull out the coaxial cable without disabled

ng Reach Power over Ethernet function for

the port from Web UI

. Directly pulling out the

coaxial cable could damage the

Long Reach

Ethernet coaxial E

xtender and the BNC female

connector of the POC2502 Managed Switch.

1. The package contains warning stickers, which

should be stuck on the coaxial cable connector

before using IFS POC252-1CX-1P extender. If

connected with Non-

IFS POC252 series

extender equipment, it might cause damage to

the equipment.

2. After POC2502 PoE port enabled, the center

pin of the coaxial cable is with electricity. Do not

touch center pin or connect this end to any non-

IFS POC2502 equipment.

Saving the Configuration via the Web

In the POC2502 Managed Switch, the running configuration file

stores in the RAM. In the current version, the running

configuration sequence of running-config can be saved from

the RAM to FLASH by ”Save Configurations to FLASH”

function, so that the running configuration sequence becomes

the startup configuration file, which is called configuration save.

To save all applied changes and set the current configuration

as a startup configuration, the startup-configuration file will be

loaded automatically across a system reboot.

1. Click ”Save > Save Configurations to FLASH” to login

to the “Configuration Manager” Page.

2. Press the “Apply” button to save running configuration to

startup configuration.

Note

: Power at BNC ports are off by default. To enable POC power at each BNC connector, please consult the manual.

For connection to POC Extenders only. NOT for direct camera

connections.

IFS POC2502 Series Quick Start Guide 5

Recovering Back to Default Configuration

IP Address has been changed or admin

password has been forgotten –

To reset the IP address to the default IP Address

“192.168.0.100” or reset the login password to default value,

press the hardware reset button on the front panel for about

10 seconds. After the device is rebooted, you can login the

management Web interface within the same subnet of

192.168.0.xx.

Figure 10: POC2502-8CXP Reset Button

This reset would be the same on the POC2502-16CXP-2T-2S.

Contact information

www.interlogix.com or www.utcfssecurityproducts.eu.

For customer support, see www.interlogix.com/customer-

support .

Interlogix is part of UTC Climate Controls & Security, a unit of

6 IFS POC2502 Series Quick Start Guide

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Interlogix Changer

Interlogix

Interlogix ES2402 Series Manuel utilisateur

Interlogix

Interlogix IFS ANT-PNL-18DB-2G Manuel utilisateur

Interlogix

Interlogix NS3500-24T-4C Manuel utilisateur

Interlogix

Interlogix NS3562-8P-2S Manuel utilisateur

Interlogix

Interlogix IADS-PROG Manuel utilisateur

Interlogix

Interlogix NS3553-4P-1T-2S-V2 Manuel utilisateur

Interlogix

Interlogix NS3552-16P-2T-2S Manuel utilisateur

Interlogix

Interlogix NS3552-16P-2T-2S Manuel utilisateur

Interlogix

Interlogix ES3002-4P-4T Manuel utilisateur

Interlogix

Interlogix MC251-4P/1S Manuel utilisateur

Interlogix

Interlogix NS3702-24P-4S Manuel utilisateur

Interlogix

Interlogix NS3702-24P-4S-V2 Manuel utilisateur

Interlogix

Interlogix NS3552-8P-2S Manuel utilisateur

Interlogix

Interlogix NS3500-28T-4S Manuel utilisateur

Interlogix

Interlogix NS2052-8P-2C Manuel utilisateur

Interlogix

Interlogix IFS GE-DSH-73 Instructions de montage

Interlogix

Interlogix IFS NS3502-8P-2S Manuel utilisateur

Interlogix

Interlogix NS3050-8T Manuel utilisateur

Interlogix

Interlogix IFS NS2052-4P-1T Manuel utilisateur

Interlogix

Interlogix IFS NS2503-8P/2C Manuel utilisateur

Interlogix

Interlogix NS3553-4P-1T-2S Manuel utilisateur

Interlogix

Interlogix NS3503-16P-4C Manuel utilisateur

Interlogix

Interlogix NS3702-24P-4S Manuel utilisateur

Interlogix

Interlogix NS4702-24P-4X Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur