Intellinet 523776 Manuel utilisateur

GIGABIT

ETHERNET

MANAGED

SWITCH

USER

MANUAL

MODEL 523776

INT-523776-UM-0607-02

INTRODUCTION

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS

™

Gigabit Ethernet

Managed Switch, Model 523776.

With eight Gigabit ports that provide true Gigabit connectivity, this switch will instantly boost





friendly, Web-based management interface, which, in addition to eight copper ports, features





network usage; VLAN reduces the collisions caused by broadcasting; Port Aggregation

enlarges the bandwidth of the backbone connection; QoS secures the bandwidth for

applications like VoIP and video conferencing. Plus, the switch supports 802.3x and



The easy-to-follow instructions in this user manual help make setup and operation quick and



• Eight 10/100/1000 Mbps auto-sensing Auto-MDIX RJ-45 ports that automatically detect

optimal network speeds

• NWAY Auto-Negotiation support

• Store and forward switching architecture

• Full/half duplex operation





 

• Port Mirroring support

• Broadcast storm control





• 180 kBytes buffer memory

• Lifetime Warranty

FCC WARNING





against harmful interference in a commercial installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communication. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case the user

will be required to correct the interference at the user’s own expense.



in which case the user may be required to take adequate measures.

INTRODUCTION

TABLE OF CONTENTS

1. INSTALLATION ............................................................................................................. 5

Front Panel .............................................................................................................. 5

Rear Panel............................................................................................................... 5

Placement................................................................................................................ 6

Description of Switch Functions .............................................................................. 7

2. MANAGEMENT............................................................................................................. 7

Switch Access ......................................................................................................... 7

   ........................................................................................................... 8

System.............................................................................................................. 8

Port ................................................................................................................... 8

VLAN ................................................................................................................ 

PVID ............................................................................................................... 10

Aggregation .................................................................................................... 10

   ..................................................................................11

Mirror ...............................................................................................................12

Storm Filter ......................................................................................................12

SNMP ..............................................................................................................13

Discovery.........................................................................................................13

Monitoring...............................................................................................................13

Statistics Overview..........................................................................................13

Detailed Statistics............................................................................................14

Maintenance ...........................................................................................................14

Restart .............................................................................................................14

Factory Default ................................................................................................14

Smart Boot.......................................................................................................14

Software Upload..............................................................................................14

3.  ........................................................................................................15

section page

CONTENTS

1. INSTALLATION

Front Panel

The front panel of the Gigabit Ethernet Managed

Switch presents the LED indicators, as shown in

the image at right and described in the table below.

NOTE:



disables this corresponding copper port.

Rear Panel

The rear panel presents the eight ports, SFP slot, power receptacle and Restore button.

Port Operation

Auto-negotiation allows the ports to run in one of the following operational modes.

NOTE:





INSTALLATION

NOTE: The image depicts only the LED section of the front panel.

LED Status Indication/Operation

PWR Steady green The switch is on.

Blinking green The switch is off.

1000M Steady green The port is connected at 1000 Mbps.

Blinking green A valid link has been established, and there is data being

transmitted or received.

Off No valid link is currently established at this port; or the port

is connected at 10/100 Mbps.

10/100M Steady green The port is connected at 10/100 Mbps.

Blinking green A valid link has been established, and there is data being

transmitted or received.

Off No valid link is currently established at this port; or the port

is connected at 1000 Mbps.

Media Speed Duplex Mode

  

Half duplex

100 Mbps Full duplex

Half duplex

1000 Mbps Full duplex

  

Restore Default Button

You can use this button to reset the switch or restore it to its factory default settings. To reset

the switch, press the button once; to restore factory default settings, press and hold the button

in for three seconds.

Power Receptacle

To be compatible with electrical standards around the world, the Gigabit Ethernet Managed



your source of electricity is within this range.



rear panel of the switch and plug the male end into a wall socket or other electrical outlet.



Placement

The switch can be placed on your desktop or mounted in a rack. Prior to placement and

installation, however, be sure that

• the environment is well-ventilated – a minimum space around the unit of 25 mm is

recommended;

• the switch and relevant components are away from sources of electrical noise, such as

 

• the environment is protected from high levels of humidity.

Desktop Placement

Position the switch on a level surface that can support the weight of the unit and any relevant

components.

Rack Placement

Rack mounting enables orderly installation in cases where a number of networking devices

need to be installed in the same area. Brackets and screws are included with the switch.

1. Disconnect all cables from the switch.



3. Position one of the mounting brackets over the mounting holes on one side of the unit.

4. Screw the bracket securely in place.

5. Repeat this for the other side of the unit.

6. Slide the unit into the rack and secure it with suitable screws.

7. Reconnect all the cables.

Cable Connections

Crossover or straight-through cable: All the ports on the switch support Auto-MDI/MDI-X

functionality. Either straight-through or crossover cables can be used to connect the switch



Category 3/4/5/5e UTP/STP cable: For a valid connection and optimal performance, it is

vital that appropriate cables be used that correspond to the different transmitting/receiving

speeds. To choose a suitable cable, refer to the following table.

INSTALLATION

Media Speed Wiring

  

  

  

  

  instructions.

Description of Switch Functions

Jumbo Frame

The Gigabit Ethernet Managed Switch supports Jumbo Frames, which means that it can

transmit the same data in fewer frames. This helps to ensure fewer overheads, shorter

processing time and fewer interruptions.

NOTE:

Flow Control and Backpressure







can be enabled or disabled on a per-port basis.

Mirror



the packets that are transferred by the monitored port, the sniffer port receives all the packets



VLAN

This switch supports Virtual LAN, which means the network can be segmented into groups to

reduce collisions caused by wide broadcasting. The switch supports both port-based VLAN

and 802.1q tag-based VLAN. Port-based VLAN directs incoming packets to VLANs according

to their ingress ports; 802.1q-based VLAN adds a tag to the header of the packet to direct the

packet to the right VLAN.

Aggregation (Trunking)

The Trunk function groups several ports into one combined transmission channel. This

increases the bandwidth, which helps to boost backbone connectivity. The switch allows a

maximum of four groups, and eight members for each group.

Quality of Service (QoS)





demanding applications such as VoIP to get an unobstructed connection.

SNMP



monitored by an SNMP management station.

2. MANAGEMENT

Switch Access

The advanced management capabilities of the switch can be accessed using a standard



station with an IP address and subnet mask that are compatible with your switch.

The factory defaults are 192.168.0.254 for the IP address; 255.255.255.0 for the subnet mask.

1. Activate your Web browser and enter the

 

 

MANAGEMENT

2. Key in the username and password. The

factory defaults for the username and the

password are both “admin.”

Conguration

System





management functions.



most of these properties.

MAC Address:

S/W Version: This is the software version of this device.

IP Address: Set up the IP address of the switch.

Subnet Mask: Set up the subnet mask of the switch.

Gateway: Set up the gateway of the switch.

Management VLAN: This is the VLAN group that is allowed to access the Web-based

management interface.

Username:

Password: 

System name: This is the name of the device.



NOTE: After applying a new IP address, a new login page will appear automatically. Log in



Port





MANAGEMENT

Link:

there is a valid connection on the port.

Mode: Select a speed for this port. “Auto Speed” enables auto-negotiation; “Disable” stops

the port from functioning.

Flow Control:

Max Frame: 





updated status of the ports.

VLAN

VLAN divides the network members into groups

to reduce packet collisions and improve network



VLAN.





VLAN\Port column.

2. Select the ports for each VLAN group.





1. Remove the members of the VLAN group by

unchecking their corresponding boxes.



 

 



NOTE:



MANAGEMENT



automatically to this port. For example, when you make Port 3 of a VLAN part of VLAN ID 2,

the PVID “2” will be assigned automatically to Port 3.

Also, settings in VLAN, Port Aggregation and Mirror are co-dependent. Be sure the settings



PVID (from the VLAN screen)

When the VLAN-enabled switch

receives a tagged packet, the

packet will be sent to the port’s

default VLAN according to the



receiving port.

Port: Ports 1 – 8.

Egress: Select “Tagged” in the

drop-down menu to enable the

PVID checking and tag inserting

of one port; select “Untagged”

to cancel. For example, if an

Egress tagged port receives an

untagged frame, it will be

transmitted as a PVID tagged

frame. The table below presents

details of tagging status.

PVID:

Only tagged: “Enable” blocks all untagged packets from accessing this port; “Disable” allows

all packets to access this port.

Aggregation (Trunking)

To set up the port trunk groups, put the

selected ports’ numbers into the same

Aggregation group. You can choose up



settings.

There are three aggregation modes to















the packets.

MANAGEMENT

Untagged Tagged

Packet Frames In Packet Frames Out Packet Frames In Packet Frames Out

      

      

      

Table des matières

Autres manuels Intellinet Routeur réseau

Intellinet

Intellinet 530347 Manuel utilisateur

Intellinet

Intellinet 560801 Manuel utilisateur

Intellinet

Intellinet 522595 Manuel utilisateur

Intellinet

Intellinet 530347 Manuel utilisateur

Intellinet

Intellinet 561051 Manuel utilisateur

Intellinet

Intellinet 524988 Manuel utilisateur

Intellinet

Intellinet 521246 Manuel utilisateur

Intellinet

Intellinet 524049 Manuel utilisateur

Intellinet

Intellinet 530347 Manuel utilisateur

Intellinet

Intellinet 523646 Manuel utilisateur

Intellinet

Intellinet 560849 Manuel utilisateur

Intellinet

Intellinet 524988 Manuel utilisateur

Intellinet

Intellinet 561044 Manuel utilisateur

Intellinet

Intellinet 524636 Manuel utilisateur

Intellinet

Intellinet 560535 Manuel utilisateur

Intellinet

Intellinet 561457 Manuel utilisateur

Intellinet

Intellinet 505093 Manuel utilisateur

Intellinet

Intellinet 560931 Manuel utilisateur

Intellinet

Intellinet 522625 Manuel utilisateur

Intellinet

Intellinet 523608 Manuel utilisateur

Intellinet

Intellinet 561051 Manuel utilisateur

Intellinet

Intellinet 524377 (Annex b) Manuel utilisateur

Intellinet

Intellinet 560405 Manuel utilisateur

Intellinet

Intellinet 560559 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité