Intelligent network solutions 524445 Manuel utilisateur
WIRELESS
150N / 300N
4-PORT ROUTER
USER MANUAL
MODELS 524445 & 524490
INT-524445/524490-UM-0112-10
2
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™Wireless 150N
4-Port Router, Model 524445, or Wireless 300N 4-Port Router, Model 524490.
The latest in wireless networking, these Wireless Routers serve multiple purposes —
an access point for your wireless network, a four-port router for hard-wiring Ethernet
devices — and bring it all together so that the devices can access a high-speed
Internet connection.
Detailed instructions in this user manual make installation reasonably quick and
simple so you’ll soon be enjoying the benets of all these popular features:
• Up to 150 Mbps (model 524445) or 300 Mbps (model 524490) network link speed
• Complies with IEEE 802.11g/b standards and is upward compatible with 802.11n
• Supports WMM function to meet the multimedia data bandwidth requirement
• Supports Wi-Fi Protected Setup (WPS)
• Supports WEP and WPA/WPA2 (TKIP and AES) data encryption
• Integrated 10/100 Mbps LAN switch with Auto MDI/MDI-X support
• DHCP server assigns IP addresses for all LAN users
• DHCP server supports static lease management
• Supports virtual server, port forwarding and DMZ (demilitarized zone)
• Supports DDNS (dynamic DNS)
• Supports UPnP (Universal Plug and Play)
• Integrated anti-DOS rewall
• QoS (Quality of Service) bandwidth management
• VPN Passthrough
• Use INTELLINET NETWORK SOLUTIONS Wireless N adapters for the best
compatibility and performance
• Easy installation through Web-based user interface
• System status
• Security log
• Firmware upgradeable
• Three-Year Warranty
Package Contents
• Wireless 150N 4-Port Router or Wireless 300N 4-Port Router
• Quick install guide, plus user manual on CD
• Power adapter
• Ethernet Cat5 RJ45 cable: 1.0 m (3 ft.)
NOTE: Some screen images have been modied to t the format of this manual.
Images in Hardware sections 1.1 and 1.2 are of the 150N Router: Displays and
components for the 300N Router are similar.
3
TABLE OF CONTENTS
TABLE OF CONTENTS
section page section page
1 HARDWARE...........................................5
1.1 Front Panel Display..........................5
1.2 Back Panel Display ..........................5
2 SYSTEM & NETWORK SETUP ............. 6
2.1 Connecting the Router .....................6
2.2 Obtaining an IP Address ..................6
2.2.1 Windows XP Setup....................7
2.2.2 Windows Vista/7 Setup..............9
2.2.3 Router IP Address Lookup....... 10
2.3 Quick Setup ................................... 13
2.3.1 Cable Modem .......................... 14
2.3.2 Fixed IP xDSL (Static IP) ......... 15
2.3.3 PPPoE xDSL ........................... 16
2.3.4 PPPTP xDSL........................... 16
2.3.5 L2TP xDSL .............................. 18
2.3.6 Telstra BigPond ....................... 18
2.4 Basic Setup.................................... 19
2.4.1 Time Zone / Auto-Synch.......... 20
2.4.2 Changing Mngmt. Password....20
2.4.3 Remote Management .............. 21
2.5 WAN Setup ....................................22
2.5.1 Dynamic IP .............................. 23
2.5.2 Static IP ...................................23
2.5.3 PPPoE ..................................... 24
2.5.4 PPPTP..................................... 24
2.5.5 L2TP........................................ 25
2.5.6 Telstra BigPond ....................... 26
2.5.7 DNS......................................... 26
2.5.8 DDNS ...................................... 27
2.6 LAN Conguration ......................... 28
2.6.1 LAN IP.....................................28
2.6.2 DHCP Server...........................29
2.7 WLAN Conguration ......................30
2.7.1 Basic Wireless Settings ........... 31
2.7.2 Advanced Wireless Settings .... 32
2.7.3 Wireless Security.....................33
2.7.4 Wireless Access Control.......... 37
2.7.5 WPS ........................................38
2.7.6 Security Tips............................39
3 ADVANCED FUNCTIONS .................... 41
3.1 QoS................................................ 41
3.1.1 Basic QoS Settings.................. 41
3.1.2 Adding a new QoS Rule .......... 42
3.2 NAT ................................................ 43
3.2.1 Port Forwarding.......................44
3.2.2 Virtual Server...........................45
3.2.3 Port Mapping ...........................46
3.2.4 UPnP ....................................... 47
3.2.5 ALG ......................................... 47
3.3 Firewall........................................... 48
3.3.1 Access Control ........................48
3.3.2 Add PC ....................................50
3.3.3 URL Blocking........................... 51
3.3.4 DoS Attack Prevention............. 52
3.3.5 DMZ.........................................53
4 ADDITIONAL FUNCTIONS ..................55
4.1 Status .............................................55
4.1.1 Internet Connections ...............55
4.1.2 Device Status ..........................56
4.1.3 System Log..............................56
4.1.4 Security Log ............................ 57
4.1.5 Active DHCP Client ................. 57
4.1.6 Statistics .................................. 57
4.2 Tools ..............................................58
4.2.1 Conguration Tools..................58
4.2.2 Firmware Upgrade...................59
4.2.3 Reset .......................................60
5 TROUBLESHOOTING.......................... 61
6 GLOSSARY ..........................................63
7 SPECIFICATIONS.................................65
4
SAFETY GUIDELINES
SAFETY GUIDELINES
For the protection of equipment users and connected devices, follow these safety
guidelines:
1. This router is designed for indoor use only; do not place this router outdoors.
2. Do not place this router in hot or humid environments.
3. Do not yank any connected cables.
4. Firmly secure this device if it’s placed at any signicant height.
5. Router accessories such as the antenna and power supply should be considered
dangerous when handled by children under the age of 3. Keep this device out
of the reach of children.
6. The router will become hot when used for long time. This is normal and is not a
malfunction, but keep the router away from paper, cloth and other ammable
materials.
7. There are no user-serviceable parts inside the router. If the router is not working
properly, contact your dealer (place of purchase) and ask for help. Do not
disassemble the router, as doing so will void the warranty.
8. If the router falls into water while it’s powered on, do not pick it up with your
hands. Disconnect the power before you do anything, or contact an
experienced technician for help.
9. If you smell something strange, or if you see some smoke coming from the
router or power supply, remove the power supply or switch the electrical power
off immediately and call the dealer for help.
5
HARDWARE
1 HARDWARE
1.1 Front Panel Display
LED Status Description
POWER ON Router is switched on and correctly powered.
WLAN On Wireless network is switched on or WPS mode is on.
Off Wireless network is switched off.
Flashing Wireless LAN activity (transferring or receiving data).
WAN On WAN port is connected.
Off WAN port is not connected.
Flashing WAN activity (transferring or receiving data).
LAN 1-4 On LAN port is connected.
Off LAN port is not connected.
Flashing LAN activity (transferring or receiving data).
1.2 Back Panel Display
Feature Description
Antenna 2dBi dipole antenna. (2 antennas on Model 524490)
Radio Activate or deactivate the wireless function with this ON/OFF switch.
Reset/ Reset the router to factory default settings (clear all settings) or start the
WPS WPS function. Press and hold for 10 seconds to restore all settings to
factory defaults; press for less than 5 seconds to start WPS.
1-4 Local Area Network (LAN) ports 1 to 4.
WAN Wide Area Network (WAN/Internet) port.
5VDC Connects tthe A/C power adapter (5V DC).
5VDC
6
SYSTEM & NETWORK SETUP
2 SYSTEM & NETWORK SETUP
2.1 Connecting the Router
1. Connect your DSL or cable modem to the WAN port of the router using the
provided RJ45 Ethernet cable. NOTE: Standard modems provided by Internet
service providers come with at least one LAN/Ethernet port, which connects to
the WAN port of the router.
2. Connect all your computers and network devices (network-enabled components
like game consoles, network media players, network storage units or LAN
switches) to the LAN ports (1-4) of the router.
3. Connect the A/C power adapter to the wall socket, and then connect it to the
power jack of the router.
4. Check all LEDs on the front panel. The PWR LED should be on, and the WAN
and LAN LEDs should be on if the computer or network device connected to the
corresponding router port(s) is powered on and correctly connected.
2.2 Obtaining an IP Address
Before you can connect to the router and start conguration procedures, your
computer must be able to obtain an IP address automatically (that is, to use a
dynamic IP address). This is the default setup for
any standard Windows computer, and it normally is
not required to make any changes.
1. With your computer connected to a LAN port on
the router, activate the network connection. Start
your Web browser and open http://192.168.2.1 to
display a login window (right).
2. Enter “admin” as the username and “1234” as the
password, then click “OK.”
213
7
SYSTEM & NETWORK SETUP
NOTE: If this procedure is successful, skip the following subsections and proceed
to 2.3 Using Quick Setup. If the above procedure doesn’t result in your obtaining
an IP address, or if you know that your computer has a static IP address setup,
follow the steps in the appropriate subsection below.
2.2.1 Windows XP IP Address Setup
1. Click “Start,” then go to the control panel. Double-click the Network & Internet
Connections icon, then click “Network Connections” and double-click “Local
Area Connection” to display the Local Area Connection Status window. Click
“Properties.”
8
SYSTEM & NETWORK SETUP
2. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically,” then click “OK.”
9
SYSTEM & NETWORK SETUP
2.2.2 Windows Vista/7 IP Address Setup
1. Click “Start,” then go to the control panel. Click “View Network Status and Tasks,”
then click “Manage Network Connections.” Right-click “Local Area Network,”
then select “Properties.” With the Local Area Connection Properties window
displayed, select “Internet Protocol Version 4 (TCP / IPv4),” and click “Properties.”
10
SYSTEM & NETWORK SETUP
2. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically,” then click “OK.”
2.2.3 Router IP Address Lookup
1. After the IP address is set up, click “Start” at the bottom-left of the desktop, then
click “Run.”
Ce manuel convient aux modèles suivants
1
Table des matières
