Intelix INT-HD52 Manuel utilisateur

11675 Ridgeline Drive

Colorado Springs, CO

80918

Rev 170724 Phone: 719-260-0061

Toll-Free: 800-530-8998

Fax: 719-260-0075

INT-HD52 Owners Manual

Important Safety Instrucons

»Please completely read and verify you understand all instrucons in this manual before operang this equipment.

»Keep these instrucons in a safe, accessible place for future reference.

»Heed all warnings.

»Follow all instrucons.

»Do not use this apparatus near water.

»Clean only with a dry cloth.

»Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)

that produce heat.

»Use only accessories specied or recommended by Intelix.

»Explanaon of graphical symbols:

◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle

symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the

product enclosure which may be of sucient magnitude to constute a risk of shock to a person or

persons.

◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended

to alert the user to the presence of important operang and maintenance (servicing) instrucons

in the literature accompanying the product.

»WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

»Use the mains plug to disconnect the apparatus from the mains.

»THE MAINS PLUG OF THE POWER CORD MUST REMAIN READILY ACCESSIBLE.

»Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong

is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of

your obsolete outlet. Cauon! To reduce the risk of electrical shock, grounding of the center pin of this plug must be

maintained.

»Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and the

point where they exit from the apparatus.

»Do not block the air venlaon openings. Only mount the equipment per Intelix’s instrucons.

»Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a

cart is used, use cauon when moving the cart/equipment combinaon to avoid injury from p-over.

»Unplug this apparatus during lightning storms or when unused for long periods of me.

»Cauon! Shock Hazard. Do not open the unit.

»Refer to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

INT-HD52 Owners Manual

Table of Contents

Product Overview�� 6

Package Contents �� 6

Front and Rear Panels�� 7

Front Panel�� 7

Rear Panel�� 8

IR Remote�� 9

Installaon Instrucons�� 10

Quick Start ��10

Mount the Switching Scaler ��10

Connecng Sources��10

HDMI / Display Port Input ....................................................................................................................10

VGA/Analog Video Inputs .....................................................................................................................10

Connecng Displays ��11

HDMI Output ........................................................................................................................................11

HDBaseT Output ...................................................................................................................................11

Connecng Microphone Input ��11

Connect Audio Output��11

Connect IR Control ��12

Source Device and Scaler Control via Remote IR ..................................................................................12

Remote Display and Scaler Control via Local IR ....................................................................................12

Apply Power ��12

Applicaon Diagram �� 13

On Screen Display (OSD) Menu Navigaon �� 14

Opons Menu ��14

Output Adjust .......................................................................................................................................14

Input5 Select ........................................................................................................................................14

Baud Rate .............................................................................................................................................14

User EDID Upload(USB) ........................................................................................................................14

Soware Update...................................................................................................................................14

Picture Menu��15

Picture Mode ........................................................................................................................................15

Color Temperature ...............................................................................................................................15

Aspect Rao .........................................................................................................................................15

Noise Reducon (HDMI Only) ..............................................................................................................15

Screen (VGA) ........................................................................................................................................15

Color Range (VGA) ................................................................................................................................15

Setup Menu��16

OSD Language.......................................................................................................................................16

Restore Factory Default ........................................................................................................................16

Blending................................................................................................................................................16

HDMI CEC .............................................................................................................................................16

OSD Duraon ........................................................................................................................................16

Version ..................................................................................................................................................16

INT-HD52 Owners Manual

Web Graphical User Interface (GUI) Control�� 17

Control Menu ��18

Source ��18

VGA .......................................................................................................................................................18

DP .........................................................................................................................................................18

VOLUME ...............................................................................................................................................18

POWER FUNCTIONS .............................................................................................................................18

Conguraon Menu��19

Conguraon; Seng��19

Output Resoluon ................................................................................................................................19

Update ..................................................................................................................................................19

Shutdown Timer (No Input) ..................................................................................................................19

Conguraon; Network ��20

Conguraon; Source Label��20

RS232 Control Menu ��21

Port .......................................................................................................................................................21

Baud Rate .............................................................................................................................................21

Command .............................................................................................................................................21

Password Menu ��22

Web Graphical User Interface (GUI) Update�� 22

RS232 Commands�� 23

Video Input Switching and Conguraon ��23

Video Input Customizaon��24

Video Input HDCP Compliance ��24

Video Output Conguraon��25

Video Output Adjustment ��25

Freeze Video Output��26

Audio Input Conguraon and Adjustment ��26

Audio Output Control��26

CEC Setup and Control ��27

Menu Navigaon ��27

OSD Visibility��27

System Query ��28

System Query (connued)��29

System Power / Factory Default��29

Troubleshoong �� 30

Presentaon Switcher does not power on ��30

No video from HDBaseT output ��30

Distorted or no video output��30

Cannot hear HDMI input audio��30

Presentaon Switcher does not automacally switch ��30

Technical Specicaons �� 31

INT-HD52 Owners Manual

The Intelix INT-HD52 is a compact auto switcher scaler that allows the integraon of analog and digital devices

into a high-denion environment. Mounng opons include under table or resng on a shelf.

The INT-HD52 allows selecon of ve dierent sources, and will simultaneously scale the selected video to

HDMI and HDBaseT outputs. The unit features three HDCP compliant HDMI inputs, one Display Port input

and one VGA input. The VGA input can be congured to support YPbPr (component), YC (S-video), and C

(composite) video formats with the appropriate VGA breakout cable. There are eight xed output resoluons

to choose from, and several aspect rao modes, which will ensure your content is displayed properly. The

HDBaseT output will allow you to extend audio, video, and control signals up to 70m away.

The INT-HD52 oers unique audio opons designed to simplify your installaon. All audio inputs are embedded

into the HDMI and HDBaseT streams, so you can use your display speakers for audio. Addionally, the balanced

stereo audio output can be used for audio reinforcement. A balanced input is provided (line or microphone

level) which is mixed with the source audio to provide voice li capabilies; while the volumes of the mic and

source can be individually controlled.

The INT-HD52 can be controlled in many dierent ways. When the VGA input is dened as a PC signal input,

the INT-HD52 can be congured to automacally switch to an input once connected to the switcher; once a

device is removed, INT-HD52 will switch to the rst acve input with HDMI inputs taking priority. The front

panel oers source selecon and volume control. Third party control systems can ulize RS232 or Ethernet

ports on the rear panel, RS232 extended (with a compable HDBaseT receiver with RS232 throughput), and

rear panel IR control. CEC enabled source and display devices can also be controlled from the INT-HD52..

Product Overview

Package Contents

• (1) Intelix INT-HD52 Switcher Scaler

• (2) Mounng Ears with 4 Screws

• (1) Power Adapter (24VDC, 2.71A)

• (4) Plasc Cushions+

• (1) IR Remote

• (1) VGA Analog Breakout Cable (VGA to YPbPr)

• (1) RS232 DB9 - 3 Pin Phoenix Breakout Cable

• (2) 3 Pin Phoenix Connectors

• (1) 5 Pin Phoenix Connector

• (1) IR Emier

• (1) IR Receiver

• (1) Quick Install Guide

INT-HD52 Owners Manual

Front and Rear Panels

Front Panel

12 3 4 5 6

8 9 10

7 8 7

1. Built in IR Receiver

2. Power Indicator - GREEN when device is in standby mode, RED when device is powered on and no indicator when there is

no power to device

3. 1-HDMI/MHL input selector and acvity LED / Le Key for On screen display control (OSD)

4. 2-HDMI input selector and acvity LED / Right Key for OSD

5. 3-HDMI input selector and acvity LED / Up Key for OSD

6. 4-Display Port input selector and acvity LED / Down Key for OSD

7. 5-VGA input selector and acvity LED / Enter Key for OSD

8. Auto Switching selector and acvity LED- Press this to enter / exit auto-switching mode / OSD menu buon

• NOTE: When you set the VGA input port to C-Video or YPbPr in Manual-switching mode, the system will not be able to enter

auto-switching mode.

•Hold this buon down for 3 seconds to enter On Screen Display menu (OSD)

9. Volume knob for variable audio control- Push knob in to toggle between ‘Mic’ and ‘Source’ control

INT-HD52 Owners Manual

Rear Panel

3 4

5 6

1. INPUTS

•Video input ports: 1 HDMI/MHL, 2 HDMI inputs, 1 Display Port and 1 VGA

•Audio input ports: 1 Display Port external audio input and 1 VGA auxiliary audio input

2. OUTPUTS

•HDMI output: HDMI video output port

•HDBaseT output: Supports PoH. Connect to a compable HDBaseT receiver to transmit A/V, IR and RS232 control

3. MIC INPUT

•Mic audio port connects to microphone

•Dial switch- switches between 3 dierent modes; 48V for condenser mics, MIC mode for dynamic mics and LINE mode for

line level audio

4. CONTROL

•RES RESET - press this to reset output resoluon to 720p or to acvate HDMI and HDBT outputs if they have been turned o

•IR IN / IR OUT - connect with IR receiver and emier to control devices via IR

•FIRMWARE - Type-A USB port for updang rmware

•RS232 - Serial port, connect a control device to control the INT-HD52

•TCP/IP - Ethernet port, connect a control device or computer to control INT-HD52

5. AUDIO OUTPUT

•Stereo balanced L/R audio output

6. DC 24V

•Locking power port, connect DC 24V power adapter

INT-HD52 Owners Manual

IR Remote

The included IR remote performs all of the funcons available on the front panel.

The remote control requires two AAA baeries, which are included.

1. Power on/o

2. Input source select buons

3. Enter / Exit audio switching mode

4. Audio mute

5. Volume - Aer pressing this buon a volume

adjustment screen will shown on display

connected to INT-HD52, then press UP/DOWN to

adjust volume

6. Navigaon. OK = enter or conrm

7. Exit: terminates current operaon

8. OSD menu, also returns to previous menu

INT-HD52 Owners Manual

Installaon Instrucons

Quick Start

Mount the Switching Scaler

1. Mount the switching scaler

2. Connect sources

3. Connect displays

4. Connect microphone input (oponal)

5. Connect audio output (oponal)

6. Connect control (oponal)

7. Apply power

At least 2 inches of free air space is required on both sides of the INT-HD52 for proper side venlaon. Avoid

mounng the INT-HD52 near a power amplier or any other source of signicant heat.

For shelf mounng, aach the supplied shelf feet to the boom of the INT-HD52.

For table mounng, aach the supplied mounng rails to the sides of the INT-HD52. Once the rails are installed,

the scaler is ready to be mounted under a table.

VGA/Analog Video Inputs

Connect the source devices to VGA inputs using VGA cables that are less than or equal to 5 meters in length.

For source devices that are further away, a VGA extension device will be required to complete the connecon.

Use the supplied adapter cable (FLX-RBOCA) if the source is an analog video signal such as component or

composite video (yellow connector on source to red connector on FLX-RBOCA).

Connect the source devices to HDMI or Display Port inputs using HDMI / Display Port cables that are less than

or equal to 5 meters in length. For source devices that are further away, an extension device will be required

to complete the connecon.

Connecng Sources

HDMI / Display Port Input

Autres manuels pour INT-HD52

Table des matières

Manuels Système d'E/S populaires d'autres marques

WAGO

WAGO 750-344 Manuel utilisateur

Teknim

Teknim TWM-1887 Mode d’emploi

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuel utilisateur

BERGHOF

BERGHOF ECC DIO 16/16 Mode d’emploi

Advantech

Advantech PCM-27J3AU Manuel d'installation et d'exploitation

Festo

Festo CP-E08-M12-CL Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuel utilisateur

Hitachi

Hitachi HX-RIO3 Series Manuel utilisateur

NUUO

NUUO SCB-A08 Manuel utilisateur

M-system

M-system R3Y-RS8 Manuel utilisateur

jablotron

jablotron JB-110N Manuel utilisateur

Omron

Omron SYSMAC C200H Manuel utilisateur

DOLD

DOLD SAFEMASTER M Manuel utilisateur

ABB

ABB OPT-MF-001 Manuel utilisateur

Omron

Omron SYSMAC C2000H Manuel utilisateur

Helmholz

Helmholz TB20 Manuel utilisateur

ICP DAS USA

ICP DAS USA tM-AD2 Manuel utilisateur

Automationdirect.com

Automationdirect.com DL305 Manuel utilisateur