CCP+™User Guide
PROPRIETARY DATA OF INTEGRATED CONTROL CORPORATION
896095-1(B) Integrated Control Corp.® Page 9 of 36
2016©
The last ID to setup is the CCP+ Node ID.
This ID is your device's unique ID. Every
CCP+™ device should have its own
CCP+ ID. A CCP+ Node ID must match
the first number of the Gateway Node ID.
An example, seen in Figures 10 & 11, is if
the Gateway Node ID is 20, then the
CCP+ Node ID must be 21-29. Multiple
CCP+™ devices can have the same
Gateway ID, but it's the CCP+ ID that
distinguishes them apart.
1.4 Sync Files
Each CCP+™ device has additional data that needs
to be downloaded.
Time/Version
Schedule
User List (if any)
To download this data, you must go to the File Sync
screen.
To get to the File Sync screen, go to the Main
MenuSign Out Settings. (When operating with
a user list, you must be signed out to sync files.)
On the Settings screen (Fig. 12), select Sync Files,
to access the File Sync screen.
To download the additional data, click on each box in
the File Sync screen (Fig. 13).
Note: After getting the Time/Version download, the
screen will indicate whether newer versions of the schedule and/or
user list are/is available on the gateway. If they are available,
press/select Get Schedule or Get User List to download.
Figure 12: Settings
Figure 13: File Sync
