1. Short press the Mode and make sure the radio in clock display
2. Press and hold the Mode button for 3 seconds then release.
3. Use the Volume knob to adjust settings, then press and release Mode button to
select settings
4. Set the hour
5. Set the minutes
6. Press the Mode to finish settings
7. The clock will only display in 24-hour (military time) format.
8. After setting the clock choose the desired Sleep time for the i50. Choices available
are: OFF, 30, 60, 90, 120 minutes.
The Instabox i50 has 2 convenient alarms that can be set independently. Once set, the
alarms will repeat twice daily.
1.Press Mode to get to the time function then press and hold Play for 3 seconds.
2.Press Mode to set the hour. Use the volume control to select the desired hour.
3.Press Mode and repeat the same steps to set the minutes.
4.Press Mode to confirm setting. The alarm sign will be flashing.
5.Press Play to turn the alarm ON or OFF. When ON is selected the alarm sign will
remain on the screen.
6.Once the alarm is set, long press Mode or Play to exit the settings or wait for 10
seconds.
7.To set additional alarms follow the steps above. After step 1, use the Volume
Control to choose which of the two alarms to set – then follow the remaining steps.
Setting the clock
Setting the alarm
11 12
There are three choices for the alarm ring:
1.The beep sound of the radio is automatically set for the alarm. This is the default.
2.Your favorite FM station can be selected as the alarm ring. Follow these steps using
the remote:
a)Select your favorite FM station, long press “1”. The screen shows “ON”
when complete.
b)To change your selection, long press “1”, when the screen shows “OFF”,
alarm clock ring is set to the default “Beep” sound.
Note: once the ring is set to an FM station, it will last for 30 minutes.
3.You can use the TF/SD Card/USB music as your alarm clock ring
a)Select a favorite song (MP3 format) from the TF/SD card or USB input. Using the
remote control, long press “1”. The screen shows “ON” when complete.
b)To change your selection, long press “1”, when the screen shows “OFF”,
alarm clock ring is set to the default “Beep” sound.
Note: You must have the TF/SD card/U disk in inserted when the alarm is ON.
Setting the alarm clock ring
