Insize ISN-L70 Manuel utilisateur

ISN-L70

MN ISN-L70- -E

www.insize.com

LASER DISTANCE METER

OPERATION MANUAL

1 2

Please read the operation manual carefully before use. 1Function features:

Large display with back-light.

2Structure:

A. LCD B. Add/Unit switch

IS N- L7 0

C. Measure/Dyna-measure

D. Measure Function(Distance/Area/Volume/Stake-out)

E. Countdown measure/Memories F. Strap holder

G. Laser emitting window H. Subtract/Back-light I. Pythagoras

J. Power button/Clear K. Reference switch/Laser receive

L. Receive window M. Battery cover N. Pin tail

Attention

Never stare directly into beam or aim the laser beams at others.

Description

Distance, area, volume and height measurement.

Unit: m, ft, in.

With measuring to track max and min value.continuos

Automatic power off: laser-30s, main unit-180s.

Fast measuring speed.

3 4

Overview for screen:

1. Laser indicator 2. Indirect measure( Single Pythagoras/ Summary

3. Measure function(

4. Measuring reference

5. Add and subtract 6. Maximum display

8. Stakes direction indicator 9. Main screen and unit

10. Countdown measuring 11. Memories 13. Units

7. Minimum display

12. Battery status

ISN-L70 is powered by two AA batteries. Remove battery cover

and observing correct polarity when install the batteries, then

close the battery cover.

Inserting the batteries:

Note: means the power in high level; means battery is about

1000 measure times left; twinkling means battery is low.

Turn on/off:

3Distance measuring:

Laser activated

Note: Keeping instrument stable when measuring.

The laser will be turn off after measuring.

4Add your measure:

of two Pythagoras/ Subtract of two Pythagoras)

Area measuring/ Volume measuring)

Operation

Before starting, please make sure battery is installed properly.

Short press to turn on, initial screen will flash seconds for

checking status and standby screen will be displayed. Long press

to turn off.

Laser will be emitted upon when you turn on. The laser will

switch off automatic in 30 seconds if there is no operation.

Laser unactivated

Short press to enable the laser if the laser is not activated,

then move the laser dot to your target. Short press to

measure and the result will be appeared on the screen.

Short press after your first measure to save into memory.

Short press again after your second measure and the result

will display on screen.

You can repeat the steps for more results.

5 6

Note: Be sure to add and subtract in same unit.

6Dyna-measuring (Continuous measuring):

Long press to activate the dyna-measuring mode.

You can short press or to pause. After pause, you can

short press to recover and to quit.

7Countdown measuring:

You can use this function for a more stable measurement.

8Measuring reference:

Short press to change reference.

9Unit of measuring:

Long press to change unit of measuring.

10 Area measuring:

Short press once to enable the area measuring.

Standby screen

You can repeat the steps for more results.

Short press again after your second measure and the result

will display on screen.

Short press after your first measure to save into memory.

Subtract your measure:

Max and min value will be displayed when moving the dot.

Short press to set time, then short press to measure.

ISN-L70 has three reference: front, rear, pintail.

Area measuring

Short press to measure length and width follow the

instruction on the screen, then the area is showed. You can

change the unit by long pressing .

Volume measuring:

Short press twice to enable the volume measuring.

Note: The front reference surface is indicated as shown.

7 8

12 Height measuring:

13 Stake-out:

14 Memory recall:

Long press to recall the memory.

FAQ And Solution

Error code:

Code

Err01

Err02

Err03

Err04

Err05

Err06

Err07

Standby screen Area measuring

Short press to measure length, width and height follow the

instruction on the screen, then the volume is showed. You can

change the unit by long pressing .

Short press to select: Single Pythagoras, Summary of two

Pythagoras, Subtract of two Pythagoras.

Short press to measure the lengths follow the instruction

on the screen, then the height will be displayed on the screen.

You can change the unit by long pressing .

Single Summary Subtract

Short press three times to edit the length of stake.

Short press and to set the value. When value is decided,

press to finish setting. to reset zero. Short press

When in dyna-measuring mode, you can get every stakes you

need follow the arrow.

To look up the last 20 measures by short pressing and .

Back-light and laser pointer switch:

Long press to enable and disable the back-light.

Long press to enable and disable the laser beam.

Description

Out of measuring range

Reflected signal is too weak

Out display range

Pythagorean calculation error

Low battery

Out of working temperature

Ambient light is too strong

max value:99999

Solution

Measure in a proper range

Select a batter surface

Divide calculation in middle steps

Check and verify values and steps

Install a new battery

Measure in an environment within

Measure in a darker place(shadow

are correct

specified working temperature

target)

Standard Delivery

Specification

Measuring range 0.05-70m

±1.5mm

0.001m

IP52

650 nm, Class II, <1mW

25mm@30m

Up to 20 results

2 x 1.5V AA batteries, for 10000 measures

110x45x30mm

130g

Accuracy

Resolution

Dust/waterfproof

Laser type

Beam size

Memory

Power supply

Dimension(L×W×H)

Weight

Measuring speed 0.5 sec.

1 pc

2 pcs

1 pc

Main unit

Battery(AA)

Safety strap

Carrying case

Table des matières

Autres manuels insize Instrument de mesure

insize

insize ISU-300D Manuel utilisateur

insize

insize ISH-SDM Manuel d'installation

insize

insize 1149 Series Manuel technique

insize

insize ISQ-TS120K Manuel utilisateur

insize

insize ISH-DSD Manuel utilisateur

insize

insize ISU-250C Manuel utilisateur

insize

insize ISF-DF Series Manuel utilisateur

insize

insize 1113INS Manuel technique

insize

insize ISU-200D Manuel utilisateur

insize

insize ISF-1DF Series Manuel utilisateur

insize

insize PLUS 3631 Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

insize ISN-L70 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques