MAX 127 OWNER’S MANUAL 6
14. Click “Load from File”
15. Find the file labeled “Max Mapping” (It should be in the Max Tech Files folder on the desktop) and click “Open”.
16. Click “Send to HW.” This will send the proper data configuration to the LED screen.
USING VIPLEX SOFTWARE
ViPlex is a powerful media playing software built specifically for use
with the screens mounted on MAX 1710. This software allows the user
to setup, program, and display a variety of media files and effects to
the LED screen. Please refer to ViPlex Manual on Desktop.
CONTROLLER (VX4S) OPERATING PROCEDURES
The VX4S is a professional LED display controller. Besides the function of display control, it also features
in powerful front-end processing, so an external scalar is no longer needed. With professional interfaces
integrated, VX4S with excellent image quality and flexible image control greatly meet the needs of the
broadcast industry, Its friendly in user-interface. so that the display to work has never been as easier and more
enjoyable as with VX4S.
BASIC SETUP
Follow the directions below for controller setup when using ViPlex software as described above:
1. Press the HDMI button on the front panel of the controller so that it turns red.
2. Press the SCALE button on the front panel of the controller so it is disabled.
Change Brightness
1. Return to main menu interface.
2. Press the Knob to select the corresponding value of brightness.
3. Rotate the Knob to adjust value.
4. Press Knob again to send new brightness value to screen.
Test Modes
1. Start at main menu interface.
2. Press the knob and scroll to Display Control.
3. Press the knob and scroll to Test pattern.
4. Scroll through the 8 different test patters.
5. To go back to normal mode press ESC and scroll back up to Normal.
Disable Scaling
1. Check if the Scale 1 button is lit up red.
2. If so, Press that button again.
3. Display should say auto scaling disabled.
Blackout Screen
1. Press knob and scroll to Display Control.
2. Press knob again and scroll to black out.
3. Press knob again and screen should go black.
4. Another way is to press the Take button on the far right
of the VX4S.
TIP: Please refer to the
NovaLCT User Manual for more
detailed setup instructions
and advanced display options
TIP: Brightness will
vary based on the
event being indoor
or outdoor as well
as cloud coverage
and time of day.
This may need to be
changed multiple
times depending on
duration of event.
TIP: See the VX4S user manual
to set custom scaling when
using other modes of display
