INO DOMINATOR Manuel utilisateur

INO BREŽICE d.o.o.

8262 Krška vas 34 b, Slovenija

Tel.: ++386 (0) 749 59 233;

Fax: ++ 386 (0) 749 59 151

E-mail: [email protected]

Internet: www.inobrezice.com

FLAIL MOWER

DOMINATOR

OPERATING INSTRUCTIONS

IT IS MANDATORY TO READ AND FOLLOW THESE INSTRUCTIONS

BEFORE CARRYING OUT ANY OPERATION!

CONTENT

1. General information………………………………………………… 4

1.1 Purpose of use…………….………………………………………….. 4

1.2 Warranty……………………………………………………………… 5

1.3 Identification of the machine..……………………………………… 6

2. Technical data…..……………………………………………………. 7

2.1 Noise.. ………………………………………………………………… 7

2.2 Technical specification ……………………………………………… 8

2.3 Optional equipment……………………………………………….… 8

3. Safety….……………………………………………………………… 9

3.1 General safety rules………………………………………………….. 9

3.2 Attachment on the tractor and transport…………………………. 10

3.3 PTO drive……………………..………………………………….…. 10

3.4 Hydraulic system...……………………………………………..…... 11

3.5 Safety rules during use, maintenance and servicing……………... 12

3.6 Warning decals……………………………………………………... 13

3.7 List of guards…..………………………………………………….... 14

4. Description and operating of the machine………………………… 15

5. Transport and attachment of the machine……………………….. 16

5.1 Transport to the customer..………………………………………... 16

5.2 Attachment and detachment from the tractor…………………... 16

5.3 Fitting the PTO shaft………………………..……………………... 17

5.4 Stability of the tractor…………………………………………….. 18

6. Adjustment ……………………………………………………….. 19

6.1 Support roller adjustment………………………………………. 20

6.2 Roller setup…………………….……………………………………… 21

6.3 Offsetting……………………………………………….. 22

6.4 Belt tension adjustment………..…………………………………… 23

7. Operating….….……………………………………………………. 24

8. After the job is done..………………………………………………… 26

8.1 Cleaning…………………………………………………………….. 26

9. Maintenance……………………………………………………….. 27

9.1 Oil control in the gearbox ………..……………………………….. 27

Greasing ……..…………………………………………………….. 28

9.2 Plan of maintenance jobs ……….…………………………………. 29

9.3 Replacement of working tools……………………………………... 29

9.4 At the end of the season …………………………………………… 30

9.5 Demolition when out of order ………………...…………………… 30

10. Trouble shooting …..……………………………………………….. 31

Dear Customer!

We are grateful that you decided to buy our product.We would like to

thank you for your trust. We are sure that you won't be disappointed with

your choice. A quality of the material, appropriate technical characteristics

and after sales services go together with your choice. For eventual

questions our stuff is always at your disposal.

We will specially respect your suggestions and observations that can be

of a great help for future development of the machine Through all the past

of our company experiances from the praxis represent a basement of de-

velopment and innovations.

INO Brežice d.o.o.

1. General information

This operation and maintenance manual is intented to the operator. It

consists of operating instructions, maintenance part and spare parts list for

the machine.

It is mandatory to follow these instructions in order to prevent events

which could endanger the operator's, other people's and animal's safety,

apart from the correct functioning of the machine. In case of doubt do not

experiment, call INO after-sales service instead, or a specialized INO dealer.

It is mandatory to read these instructions to understand the

operating of the machine!

In the case of re-sale of the machine it is necessary to give

these instructions to the new owner!

A meaning of decals in this book

Very important information!

Technical warning!

Safety warning!

Purpose of use

Flail mower DOMINATOR is a heavy duty professional machine, purpo-

sed for use on large agriculture and green areas, for mulching maize and

other crop residues, grass and bushes on green and abandoned areas. This

machine is very rigid and made for use in hard working conditions.

Warranty

Warranty period for the machine is 24 months.

WE DECLARE WITH FULL RESPONSIBILITY THAT THIS TYPE OF THE PRO-

DUCT FULFILLS ALL THE RELEVANT PROVISIONS OF THE FOLLOWING DI-

RECTIVES:

DIRECTIVE MACHINE 2006/42/EC

AND FOLLOWING ADDITIONS:

91/368/CEE, 93/44/CEE, 93/68/CEE

HARMONISED STANDARDS APPLIED IN ORDER TO VERIFY COMPLIANCE

WITH DIRECTIVES:

SIST-EN 292-1, SIST-EN 292-2, SIST EN ISO 4254-12:2012

A producer can ensure normal operating of the machine only

with use of original spare parts!

INO is not responsible for any damage or injuries, if the user

doesn't consider the rules in this book!

INO is not responsible for any damage or injuries due to impro-

per use of the machine!

After receiving the machine it is necessary to check that the machine

has not been injured during transport and that it is equipped with all basic

and additional equipment ( if ordered). A customer can claim any missing

or damaged part in the period of 8 days after receiving the machine.

INO does not accept any responsibility in the case of:

•Improper maneuvring the machine,

•Improper maintenance,

•Unauthorized repairing ormodifications on the machine or use

of non-genuine spare parts,

•Non-respecting these rules,

•Overloading of the machine (see Table nr.1 –limited values)

Identification of the machine

Each machine is fitted with an identification plate with the following

data: producer and address, CE sign, name of the machine, type, weight,

identification number and year of production.

Fig. 1

MULCER

DOMINATOR

1093 kg

2019

123

2. Technical data

Fig. 2

1. frame

2. gearbox

3. belt drive

4. linkage

5. flaps

6. hydraulic cylinder

7. skids

8. sliding tubes

Noise

The sound level of this machine, as measured at the operator's ear,

ranges from 70 to 90 dB when the rear window of tractor is open. We

recommend the use of ear protectors

Optional equipment

According to the working requirements we recommend the following

additional equipment:

•Y-blades

•Double skin

•Reversible gearbox

•Gearbox 540 rpm

•INO VIBRATION CONTROL

Technical specification

Table. 1: Technical data

Type

Unit

DOMINATOR

250

DOMINATOR

270

DOMINATOR

300

Working width

244

277

312

Min.tract.power

Max.tract.power

110

130

RPM

min-1

540/1000

Y blades

nr.

108

Hammers

nr.

Weight

971

1023

1093

Offsetting

Linkage

cat.

Total width

267

300

333

3. Safety

General safety rules

1. Before starting the machine, functionality, road safety and acci-

dent prevention rules must be checked.

2. Together with the operating and maintenance rules for the ma-

chine it is necessary to consider general health and security rules

and warnings.

3. Before starting it is mandatory to know everything regarding the

equipment and operating of the machine. Reading instructions

when operating is too late.

4. Security and warning decals on the machine are very important.

Respect them always.

5. Even when using the machine correctly, stones or other objects

may accindentally fly a long distance. Therefore everybody must

stand out of the danger area. Special attention must be paid when

working near roads or buildings.

6. Use tractor with the cabin.

7. Whenever using public roads, respect traffic rules.

8. Never wear loose or fluttering clothes.

9. Keep the machine clean to avoid fire danger.

10. Before starting check the surrounding area for the likely presence

of children and/or animals.

11. Never carry passengers on the machine.

12. Never overload the machine and the tractor. Use the ballast if ne-

cessary.

13. Start the machine only if all guards of the machine are fit on proper

places .

14. It is forbidden to stand in the range of operating of the machine.

15. Do not enter the working zone of the PTO shaft. It is dangerous to

approach the rotating parts of the machine.

16. Keep a safety distance from drive parts outside the machine (PTO

shaft, hydraulic pipes).

17. Before leaving the tractor with the machine attached disconnect

the tractor, put the machine steadily on the ground (with the

hydraulic lift), apply the hand brake and if the ground is steeply

slooping, wedge the tractor.Take out the starting key.

18. Do not enter the zone between the tractor and the machine. It is

strongly forbidden to be in this zone if the tractor is not properly

disconnected, hand brake applied and starting key taken out.

Attachment to the tractor and transport

1. Before attaching the machine or detaching it of the tractor be sure

that hydraulic lift system is in a neutral position.

2. Check that a category of 3-point linkage on the tractor corresponds

to that one on the machine.

3. Be careful! There is a danger of injuries when working near or with

3-point linkage.

4. It is forbidden to be in the zone between the tractor and the ma-

chine while working with the hydraulics.

5. Put the 3-point linkage into the position that makes the moving of

the machine impossible.

6. During transport secure the lever of hydralic lift to avoid any

unplanned moving of the machine.

7. ever leave the tractor cab when the tractor is working.

8. Adjust driving speed to the road conditions.

PTO drive

1. Use only PTO shafts with all guards, as directed by the producer.

2. All guards on PTO shaft must be in good order .

3. Take care that all guards on the PTO shaft are in proper position

during transport or operating. Respect the producer's instructions.

4. The PTO shaft must be assembled or diassambled only with the

engine stopped and the starting key removed.

5. The guards of the PTO shaft must be fixed to the machine and to

the tractor with chains to prevent rotation.

6. Before starting always check that the speed and the rotational di-

rection correspond to those on the machine.

Table des matières

Autres manuels iNO Tondeuse à gazon

iNO

iNO EURO MINI Manuel utilisateur

iNO

iNO MKM Manuel utilisateur

iNO

iNO DUPLEX 800 Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur

iNO DOMINATOR Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques