INNOVV K5产品概述
The INNOVV H5 is a high-end helmet camera specially designed for motorcycle enthusiasts. The camera is able to capture videos in 4K at 30 FPS.
Utilizing unique anti-shake and stabilization technology, the H5 is a perfect lightweight device for capturing videos, photos, and audio in a rapid
motion environment. The DVR comes with a removable battery which can be replaced with the power supply enabling a longer duration of
recording without power loss anxiety.
1. Max resolution 4K at 30 FPS up to 20 mega pixels for images.
2. Anti-Shake by EIS offers a more stable image recording ability.
3. Equipped with a helmet microphone with wind/noise reduction technology for a clearer audio
recording.
4. The removable battery life is up to 5 hours and the alternative power supply offers even longer
recording time.
5. Supports up to 512GB TF card.
6. The waterproof rating of the whole system is IP65, which meets the requirements of splashproof,
waterproof and dustproof.
7. Small sized DVR allowing for various and easy installations.
1. Lens
2. DVR
3. Wi-Fi indicator
4. Button
5. Recording indicator
6. Upper & Lower buckle
7. Type-C USB connector
8. Power Supply
9. Power extension cable
10. USB connector
11. Battery
12. Type-C USB connector
13. Type-C USB charging port
14. Charging indicator
15. Type-C USB cable
16. TF card socket
17. Internal microphone
安装指引
INNOVV H5 Helmet Cam
INNOVV K5产品概述
安装指引
INNOVV H5 Product Overview
TF-Card Instruction & Installation
Installation Guide
We recommend using a TF card with High Endurance Type, U1/U3 or
above rating (UHS Speed Class 1 or 3).
Please note that the TF card should be formatted to FAT32 for
the first time using.
Format the TF-card
Format the TF-card in camera:
Insert the TF card into the camera and format the card by the
INNOVV App via settings menu.
Format the TF-card on computer:
Insert the TF card into a computer and format it as FAT32.
Insert the TF-card into the TF card socket in the forward direction.
Charging the Battery
DVR Installation
Step 1. Disconnect the battery.
Step 2. Insert the USB Type-C cable in the connector port of the battery.
Step 3. Connect the USB cable to a power supply (i.e., adapter, power bank, etc.)
* The output of the power supply should be 5V/2A.
Caution: The battery is not waterproof when separated from the DVR. Handle it with care and keep it
away from liquids and moisture.
Step 1. Unlock the upper and lower buckles of the
DVR.
Step 2. Connect the Type-C connector of the battery to
the Type-C port of the DVR.
Step 3. Lock the buckles tightly.
Caution: The DVR is not waterproof when separated from the Battery.
Handle it with care, and keep it away from liquids and moisture.
DVR Installation onto Helmet
The camera bracket can be positioned on the left, right side or top of your helmet.
Step 1. Stick the side/top mount bracket into place on the helmet.
Step 2. Slide the DVR into place on the side/top mount bracket.
Step 3. Enter the App by connecting H5 Wi-Fi, then click to start recording.
Step 4. Adjust the camera position according to personal preference and lock the back mount into place.
Connect to a power
supply
*Align
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
2
1. Install App: Scan the QR code on the right or download the INNOVV H5 from App market.
2. Assemble the camera: Insert the TF card, power on the unit by the INNOVV USB power supply or INNOVV battery.
3. Starting up: Press the button for 1 second, the camera will work once the red light is on after two short vibrations.
4. Connect to the Wi-Fi: Enter the App on your mobile phone by connecting the Wi-Fi INNOVV H5_******, the defaulted password
is 12345678, the green light will be solid on after connected, green light will keep flashing if the Wi-Fi connection has failed.
5. Record pause: Click in the App interface, the red light flashes when recording is paused, the camera will resume to recording
by click again.
6. Snapping pictures: Press the button once while the camera is recording, the red light will flash one time, the photo will be saved in the “photo” file.
7. Activate the Wi-Fi: The green light will go off in the power down mode, if you need to activate the Wi-Fi, please press the button and the green light will flash,
meanwhile, there is a snapped picture be taken and saved in the “photo”file.
8. Turn off the camera: The camera will go off after a long press of the button for 4 seconds, and the red light will be off after a short vibration.
9. Copying videos: Take off the TF card from H5 and copy the videos in your computer, or check the videos by connecting the camera to the PC by an USB cable.
10. Reset the camera: Reset the H5 by removing the battery or disconnecting the USB power supply .
11. Factory default settings: Restore the default settings by pressing the button for more than 10 seconds when the camera is off, there will be two short vibrations
and along vibration during the process.
12. Firmware update:
-PC: Copy the firmware INNOVV H5.BRN to root of TF card.
-Camera: Copy the firmware INNOVV H5.BRN to a TF card, insert it into the camera, press the button, the firmware will be automatically updated
and green light flashing alternately).
13. More functions: Please refer to the App interface for more functions.
User Guide
Side mount bracket Top mount bracket Side mount Top mount
Step 1. Stick the microphone inside
the helmet.
Step 2. Adjust the microphone to
personal preference for optimal
recording.
DVR Installation onto Bicycle
Fix the DVR on the bicycle with the handle bar bracket.
Step 1. Fix the handle bar bracket on the bicycle.
Step 2. Slide the DVR into the back mount.
Step 3. Turn on the DVR and enter the App by connecting the H5 Wi-Fi.
Step 4. Adjust the camera direction and lock the back mount into place.
* Power bank
*Handle bar bracket
with red light
and green light flashing alternately. The firmware in the card will be deleted once the update succeeds (Caution: The power can not be cut off when the red light
