6 © 2017 InnovAg
1. What is a MiniTest?
MiniTest is a small, light, handheld instrument for testing vacuum supplies
and pulsators in dairies. It uses the same high-accuracy analysis as its
‘big brother’ DairyTest Professional, but in a smaller, lighter, lower-cost
format. It is intended for use by personnel with technical knowledge of
dairy operation as an accessory to a professional test kit, eg. for bench-
testing of pulsators or a quick check on dairy performance. It has only a
single vacuum port and cannot be connected to a PC or printer.
If you have difculties, we have a Freecall help line within Australia
(1800 061 167). International users should call their local distributor or
2. Safety Precautions
MiniTest is intended to be used in the milking stall – always allow for the
unpredictable nature of animals.
During the measurements, sharp needles may be used – take care they
don’t hurt people or animals.
Always ask the dairy farmer about the behaviour of the animals and
milking method used.
If using MiniTest in wet tests, always keep the unit above the test point
to prevent uid entering. Damage to the unit from uid entering the
sensor is not covered under the warranty.
3. Maintenance and Calibration
Maintenance
Clean the MiniTest with a moist cloth. Do not use cleaning agents.
MiniTest performs a self test when turned on, turning on all segments
of the LCD. If an error message is displayed (E-01 for example), or you
suspect the unit is damaged; contact innovAg or the local distributor for
further information.
Calibration
MiniTest automatically performs a zero calibration when turned on.
Do not turn on your MiniTest with vacuum connected. If the unit
